| Title |
Publisher |
Price |
An STL file representing the decoy “ironclad” dubbed the Black Terror. It was built on a coal barge to resemble a Union ironclad and used to confuse the Confederate forces salvaging the USS Indianola at Davis Bend in February 1863. The ruse worked and Indianola was abandoned. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file of a generic steam frigate, typical of those used by many seafaring nations in the 1860s and 1870s.
The model is scaled to 1/600, and prints well at 1/1200 on a resin printer ... [click here for more] |
Long Face Games |
$4.04
|
A set of two 3D model files representing typical riverboat steamers converted into gunboats during the American Civil War. Two variants are included. The models are scaled at 1/600, scale to 50% in your slicer for 1/1200. ... [click here for more] |
Long Face Games |
$5.39
|
A 3D model file representing a stern wheel snag boat, typical of those seen on the Mississippi and other rivers. Their purpose was to clear floating obstructions, tree trunks and other “snags”. They could be found in support of naval forces throughout the civil war . The model file is scaled for 1/600 – set the scale to 50% in your slicing software for 1/1200 ... [click here for more] |
Long Face Games |
$5.39
|
A set of seven side wheel transports and gunboats modelled in 1/1200 typical of those seen on rivers in North America during the American Civil War. This title contains the .stl files for 3-D printing. ... [click here for more] |
Long Face Games |
$10.11
|
A set of seven stern wheel transports and gunboats modelled in 1/1200 typical of those seen on rivers in North America during the American Civil War. This title contains the .stl files for 3-D printing. ... [click here for more] |
Long Face Games |
$10.11
|
A set of 1/2400 3d printed STL files of ancientgalleys. Multiple ships per base, designed for use with LFG's "He Hemetera Thalassa, Mare Nostrum" rules but can be used with other sets of rules as well. I am hoping to add nw types and variants over the coming months. ... [click here for more] |
Long Face Games |
FREE
|
A 3D model file representing the Argentinean monitor El Plata and her sister ship the Los Andes. Both were built in England and entered service in 1875. The STL files are scaled for 1/600. Set your slicer at 50% for 1/1200.
Note: some slicers appear to increase the dimensions of the turret by a factor of ten. If this occurs simply rescale the turret to 10%, or 5% if printing at 1/1200 ... [click here for more] |
Long Face Games |
$5.39 $4.04
|
A set of five 3D model files representing the ironclads originally ordered by or built in Brazil in the 1860s. Five models are included:
Frigate Brazil
Gunboat Tamandare
Gunboat Barroso
Gunboat Rio de Janeiro
Monitor Rio Grande
The models are scaled for 1/600.
Set your slicer to 50% for 1/1200 ... [click here for more] |
Long Face Games |
$20.21
|
A set of five 3D model files representing the ironclads originally ordered by Paraguay but purchased by Brazil and used in the Paraguayan War. Five models are included (Paraguayan names in parentheses):
Monitor Silvado (Nemesis)
Monitor Bahia (Minerva)
Monitor Lima Barros (Bellona)
Gunboat Cabral (no name assigned)
Gunbot Herval (Medusa)
Also included is a Paraguayan Chata floating gun platform
The... [click here for more] |
Long Face Games |
$20.21
|
A set of six 3D model files representing the nine ships of the Brazilian squadron at Riachuelo and through the Paraguayan War:
Amazonas
Aguari (and Iguatemi)
Beribe (and Jequitinhonha)
Belmonte (and Parnaiba)
Mearim
Ypiranga
The models have been scaled for 1/600, set your slicer to 50% for 1/1200. ... [click here for more] |
Long Face Games |
$20.21
|
A set of 1/2400 scale STL files for LFG's "Those Who Seek Death" fleet action rules. The set comprises nine types of bases of the following types:
Chinese 4 deck flagship (2 different types)
Chinese 3 deck warship
Chinese single deck warship
Song Era large paddle warship
Song Era small paddle warship
Song Era small warship
Mortar rafts
Fire rafts
... [click here for more] |
Long Face Games |
$6.74
|
A set of 3 STL files covering a 4 gun battery, 2 gun battery and 2 mortar battery. The models are scaled at 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
FREE
|
A set of STL files representing the many types of schooners that were used by both sides in the Civil War (and which are of use for other theatres of war as well. Three variants are included, one armed, one unarmed and one carrying a heavy mortar, typical of those used on the Mississippi. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A set of STL files representing the Union submarine Alligator and the and the Confederate submarine Hunley (modelled with and without a spar torpedo). The models are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
FREE
|
A set of nine 3D model files representing generic civilian steam ships and gunboats, typical of those in service in South American waters in the 1860s-early1880s, suitable for the Paraguayan War and the War of the Pacific.
The set comprises two gunboats, four small passenger and cargo steamers, two large passenger steamers and an ex-Confederate blockade runner, a number of which were sold into commercial... [click here for more] |
Long Face Games |
$26.95
|
Three 3D model files representing generic blockade runners of the American Civil War. |Two is in original Confederate configuration, the third is armed to represent a vessel captured by the Union and pressed into service as a gunboat. The STL files are scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$5.39 $4.04
|
A set of STL files representing Confederate floating gun batteries in three variants. The model is based on the well-known battery at Charleston with overhead protection Two lesser protected variants are also included. The models are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A set of five 3D model file representing generic Confederate riverboat rams and gunboats, based on the types operated around \Memphis in 1862. The STL files are scaled for printing in 1/600. Set scale to 50% in your slicer to print at 1/1200 ... [click here for more] |
Long Face Games |
$8.09
|
A set of six 3D models representing the Confederate squadron that operated on and around Lake Ponchartrain. The models are scaled to 1/600. The following ships are included:
CSS Carondelet
CSS Bienville
CSS Arrow
CSS Grey Cloud
CSS Oregon
CSS Pamlico
... [click here for more] |
Long Face Games |
$24.26
|
An STL file representing the Confederate armed tug CS Neptune. She joined the gunboat CS Bayou City in attacking the Union squadron at Galveston but was sunk. Three variants are included, one unarmed, one with deck guns and the third with guns and with cotton bale “armour”. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the Confederate gunboat CSS Diana. She was captured by Union forces in April 1862and served as USS Diana, until she was recaptured by the Confederacy in March 1863. She operated mainly on the rivers of Louisiana The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file representing the Confederate gunboat CSS Little Rebel. She served as the flagship of the Confederate River Defence Fleet. After participating in key battles like Plum Point Bend and Memphis, she was captured by Union forces, repaired, and served as USS Little Rebel until the end of the Civil War.. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.04
|
A set of three STL files representing the ships of the Albemarle class of casemate ironclads.. Albemarle and Neuse were completed and saw action, Albemarle being sunk by spar torpedo. Pamlico was a projected third vessel of the class which was never completed. Files are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file representing the Confederate casemate ironclad CSS Arkansas. One of the most famous ships of the war, Arkansas fought the Union warships Carondelet, Queen of the West and Tyler, ran past the Union fleet at Vicksburg and fought at Baton Rouge before being scuttled by her crew in August 1862. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model STL file of the Confederate sidewheel casemate ironclad Baltic. The ship operated on Mobile Bay and on the Tombigbee River until she was dismantled in 1864. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the Confederate gunboat CS Bayou City. She confronted the Union attacking squadron at Galveston with some success – her crew captured the revenue cutter Harriet Lane whilst the Union gunboat Westfield was run aground and burnt. wo variants are included, one “plain”, the other with cotton bale “armour”. The model is scaled to 1/600 and prints... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the Confederate gunboat “General Bragg” She operated on the Mississippi and helped to sink the Union ironclad “Cincinnati”. She was captured near Memphis and taken into Union service as the USS Bragg. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file representing the Confederate casemate ironclad CSS Charleston. She served as the flagship of the Charleston squadron until she was destroyed to prevent capture in 1865. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model STL file of the Confederate gunboat Chattahoochee, whose remains are on display at the National Civil War Naval Museum in Columbus, Georgia. The ship operated on the river whose name she bore until she was destroyed in a boiler explosion in 1863. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file representing the Confederate casemate ironclad CSS Chicora. She served as part of the Charleston squadron until she was destroyed to prevent capture in 1865. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file representing the Confederate cottonclad ram “Colonel Lovell”, which formed part of the River Defense Fleet on the Mississippi in 1862. The Colonel Lovell fought at the Battle of Plum Point and was lost at the Battle of Memphis. The STL scaled to 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file representing the Confederate casemate ironclad CSS Fredericksburg. She served as part of the James River Squadron, and fought at the battle of Trent’s Reach, leading the Confederate squadron. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file representing the Confederate cottonclad ram “General Beauregard”, which formed part of the River Defense Fleet on the Mississippi in 1862. The General Beauregard fought at the Battle of Plum Point and was lost at the Battle of Memphis. The model is representative of many similarly converted vessels. The STL scaled to 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file representing the Confederate cottonclad ram CSS General Earl Van Dorn, which served in the River Defense Fleet on the Mississippi. The Van Dorn fought at Fort Pillow and was the only surviving Confederate ram at the Battle of Memphis. . The model is scaled at 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file representing large Confederate timberclad gunboat, CSS General Polk. She served on the Mississippi River in 1862, fighting at bthe battles of Lucas Bend, Kentucky Bend and the defence of Columbus. She was burnt near Yazoo City in June 1862. The model is scaled to 1/600 and prints well in 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the Confederate gunboat ram “General Stirling Price” She operated on the Mississippi and was sunk by the Union ram “Queen of the West”. She was later raised and taken into Union service as the USS General Price. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the Confederate gunboat ram General Sumpter. She operated on the Mississippi and was part of the force that crippled the ironclad Cincinnati at the battle of Plum Point in May 1862. She was captured by the Union in August that year but was used for spare parts and eventually burned and scrapped shortly thereafter. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file representing the Confederate gunboat “General Thompson”, part of the River Defense Fleet” on the Mississippi. STL file is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the Confederate ironclad battery CSS Georgia. Also known as “The Ladies Ram” as she was part funded by the Ladies Gunboat Association, she was built to defend Savannah. Her engines were underpowered so she was used as a static battery until scuttled in December 1864. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the Confederate cottonclad gunboat CSS Governor Moore. She served on the Mississippi around New Orleans and fought at the battles of Fort Jackson and Fort St Phillip in 1862, where she eas destroyed The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the Confederate gunboat CSS Grampus. She served on the Mississippi river and served at the defence of Island No. 10, where she was burned to avoid capture on 7th April 1862. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the Confederate gunboat “Isondiga”. The ship operated in waters around Savannah. She accompanied the CSS Atlanta at the battle of Wassaw Sound on 17th June 1863. She is typical of a number of gunboats constructed or converted in Confederate ports. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$2.70
|
An STL file representing the Confederate gunboat “Ivy”, which served on the Mississippi at New Orleans and which took part in the Battle of Head of Passes with Manassas, Calhoun, Tuscarora and others in October 1861. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04 $3.03
|
An STL file representing the Confederate casemate ironclad CSS Jackson, formerly known as the Muscogee. She was built in Columbus, Georgia. Laid down in 1862 as a paddle wheeler, it was realised the design was inadequate and she was rebuilt as a larger ship with two propellers. Never finally completed after launch, she was burnt in 1865. The model is scaled to 1/600 and prints well... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the Confederate gunboat CSS Livingston. She was a ferryboat converted at Columbus, Kentucky in 1862. She had a short career, working on the Mississippi and Yazoo rivers. She was burnt later in 1862 to avoid capture. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file of the Confederate casemate ironclad Louisiana, built at New Orleans to defend the Mississippi river. Three variants are included; her initial configuration, the ship as armed at the battle of April 24th 1862, and a third with her full armament. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$5.39
|
A set of two 3D model files representing the Confederate gunboat CSS Macon which operated in Savannah, Georgia. Two variants are included, one “as built”, the second with cotton bale “armour” fitted around the machinery spaces. The models are scaled at 1/600, scale to 50% in your slicer for 1/1200. ... [click here for more] |
Long Face Games |
$5.39
|
An STL file representing the Confederate ironclad ram CSS Manassas. She was converted from the icebreaker Enoch Train and was the Confederacy’s first ironclad. To save the perpetual “one or two smokestacks?” question the model comes in 2 variants. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04 $3.03
|
A 3D model file representing the Confederate gunboat CSS McRae, which fought on the Mississippi River. She fought at the Head of Passes and Fort St Philip, and finally sank at New Orleans. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer ... [click here for more] |
Long Face Games |
$4.04 $3.03
|
Log In 
