| Title |
Publisher |
Price |
A set of two 3D model files representing typical riverboat steamers converted into gunboats during the American Civil War. Two variants are included. The models are scaled at 1/600, scale to 50% in your slicer for 1/1200. ... [click here for more] |
Long Face Games |
$4.88
|
A 3D model file representing a stern wheel snag boat, typical of those seen on the Mississippi and other rivers. Their purpose was to clear floating obstructions, tree trunks and other “snags”. They could be found in support of naval forces throughout the civil war . The model file is scaled for 1/600 – set the scale to 50% in your slicing software for 1/1200 ... [click here for more] |
Long Face Games |
$4.88
|
A set of seven side wheel transports and gunboats modelled in 1/1200 typical of those seen on rivers in North America during the American Civil War. This title contains the .stl files for 3-D printing. ... [click here for more] |
Long Face Games |
$9.15
|
A set of seven stern wheel transports and gunboats modelled in 1/1200 typical of those seen on rivers in North America during the American Civil War. This title contains the .stl files for 3-D printing. ... [click here for more] |
Long Face Games |
$9.15
|
A set of 1/2400 3d printed STL files of ancientgalleys. Multiple ships per base, designed for use with LFG's "He Hemetera Thalassa, Mare Nostrum" rules but can be used with other sets of rules as well. I am hoping to add nw types and variants over the coming months. ... [click here for more] |
Long Face Games |
FREE
|
A 3D model file representing the Argentinean monitor El Plata and her sister ship the Los Andes. Both were built in England and entered service in 1875. The STL files are scaled for 1/600. Set your slicer at 50% for 1/1200.
Note: some slicers appear to increase the dimensions of the turret by a factor of ten. If this occurs simply rescale the turret to 10%, or 5% if printing at 1/1200 ... [click here for more] |
Long Face Games |
$4.88 $3.66
|
A set of five 3D model files representing the ironclads originally ordered by or built in Brazil in the 1860s. Five models are included:
Frigate Brazil
Gunboat Tamandare
Gunboat Barroso
Gunboat Rio de Janeiro
Monitor Rio Grande
The models are scaled for 1/600.
Set your slicer to 50% for 1/1200 ... [click here for more] |
Long Face Games |
$18.31
|
A set of five 3D model files representing the ironclads originally ordered by Paraguay but purchased by Brazil and used in the Paraguayan War. Five models are included (Paraguayan names in parentheses):
Monitor Silvado (Nemesis)
Monitor Bahia (Minerva)
Monitor Lima Barros (Bellona)
Gunboat Cabral (no name assigned)
Gunbot Herval (Medusa)
Also included is a Paraguayan Chata floating gun platform
The... [click here for more] |
Long Face Games |
$18.31
|
A set of six 3D model files representing the nine ships of the Brazilian squadron at Riachuelo and through the Paraguayan War:
Amazonas
Aguari (and Iguatemi)
Beribe (and Jequitinhonha)
Belmonte (and Parnaiba)
Mearim
Ypiranga
The models have been scaled for 1/600, set your slicer to 50% for 1/1200. ... [click here for more] |
Long Face Games |
$18.31
|
A set of 1/2400 scale STL files for LFG's "Those Who Seek Death" fleet action rules. The set comprises nine types of bases of the following types:
Chinese 4 deck flagship (2 different types)
Chinese 3 deck warship
Chinese single deck warship
Song Era large paddle warship
Song Era small paddle warship
Song Era small warship
Mortar rafts
Fire rafts
... [click here for more] |
Long Face Games |
$6.10
|
A set of 3 STL files covering a 4 gun battery, 2 gun battery and 2 mortar battery. The models are scaled at 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
FREE
|
A set of STL files representing the Union submarine Alligator and the and the Confederate submarine Hunley (modelled with and without a spar torpedo). The models are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
FREE
|
A set of nine 3D model files representing generic civilian steam ships and gunboats, typical of those in service in South American waters in the 1860s-early1880s, suitable for the Paraguayan War and the War of the Pacific.
The set comprises two gunboats, four small passenger and cargo steamers, two large passenger steamers and an ex-Confederate blockade runner, a number of which were sold into commercial... [click here for more] |
Long Face Games |
$24.41
|
Three 3D model files representing generic blockade runners of the American Civil War. |Two is in original Confederate configuration, the third is armed to represent a vessel captured by the Union and pressed into service as a gunboat. The STL files are scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$4.88 $3.66
|
A set of five 3D model file representing generic Confederate riverboat rams and gunboats, based on the types operated around \Memphis in 1862. The STL files are scaled for printing in 1/600. Set scale to 50% in your slicer to print at 1/1200 ... [click here for more] |
Long Face Games |
$7.32
|
A set of six 3D models representing the Confederate squadron that operated on and around Lake Ponchartrain. The models are scaled to 1/600. The following ships are included:
CSS Carondelet
CSS Bienville
CSS Arrow
CSS Grey Cloud
CSS Oregon
CSS Pamlico
... [click here for more] |
Long Face Games |
$21.97
|
A set of three STL files representing the ships of the Albemarle class of casemate ironclads.. Albemarle and Neuse were completed and saw action, Albemarle being sunk by spar torpedo. Pamlico was a projected third vessel of the class which was never completed. Files are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.66
|
A 3D model STL file of the Confederate sidewheel casemate ironclad Baltic. The ship operated on Mobile Bay and on the Tombigbee River until she was dismantled in 1864. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.66
|
A 3D model STL file of the Confederate gunboat Chattahoochee, whose remains are on display at the National Civil War Naval Museum in Columbus, Georgia. The ship operated on the river whose name she bore until she was destroyed in a boiler explosion in 1863. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.66
|
A 3D model file representing the Confederate cottonclad ram “General Beauregard”, which formed part of the River Defense Fleet on the Mississippi in 1862. The General Beauregard fought at the Battle of Plum Point and was lost at the Battle of Memphis. The model is representative of many similarly converted vessels. The STL scaled to 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.66
|
A 3D model file representing the Confederate cottonclad ram CSS General Earl Van Dorn, which served in the River Defense Fleet on the Mississippi. The Van Dorn fought at Fort Pillow and was the only surviving Confederate ram at the Battle of Memphis. . The model is scaled at 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.66
|
A 3D model file representing the Confederate gunboat “General Thompson”, part of the River Defense Fleet” on the Mississippi. STL file is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$3.66
|
An STL file representing the Confederate gunboat “Isondiga”. The ship operated in waters around Savannah. She accompanied the CSS Atlanta at the battle of Wassaw Sound on 17th June 1863. She is typical of a number of gunboats constructed or converted in Confederate ports. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$2.44
|
An STL file representing the Confederate gunboat “Ivy”, which served on the Mississippi at New Orleans and which took part in the Battle of Head of Passes with Manassas, Calhoun, Tuscarora and others in October 1861. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.66
|
A 3D model file of the Confederate casemate ironclad Louisiana, built at New Orleans to defend the Mississippi river. Three variants are included; her initial configuration, the ship as armed at the battle of April 24th 1862, and a third with her full armament. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.88
|
A set of two 3D model files representing the Confederate gunboat CSS Macon which operated in Savannah, Georgia. Two variants are included, one “as built”, the second with cotton bale “armour” fitted around the machinery spaces. The models are scaled at 1/600, scale to 50% in your slicer for 1/1200. ... [click here for more] |
Long Face Games |
$4.88
|
A set of 3D model STL files representing the Confederate casemate ironclad Mississippi, which was built at New Orleans but not completed prior to the fall of the city and was burnt to prevent capture. Three variants are supplied, showing an early planned configuration with 2 funnels, her final planned appearance, and her appearance when she was destroyed The models are scaled at 1/600, and print well... [click here for more] |
Long Face Games |
$3.66
|
A set of 3D model files representing the c-Confederate gunboats “Morgan” and “Gaines” which served at Mobile, Alabama. Two sets of files are included, one set scaled for 1/600 the other (with slightly thickened masts for added strength) for 1/1200 ... [click here for more] |
Long Face Games |
$4.88
|
A 3D model STL file representing the ironclad “Nashville”, which was built and operated near Mobile, Alabama. The ship took part in several actions around Mobile Bay and survived the war. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.66
|
A set of STL files representing the Confederate gunboats and sister ships, Patrick Henry and Jamestown, which served on the James River. Patrick Henry took part in the Battle of Hampton Roads in 1862. The STL files are scaled for printing in 1/600. and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.66
|
A set of 3D files representing the Confederate gunboat Pee Dee, which served on the Pee Dee river in South Carolina. Files are included for 1/600 and 1/1200 scale models (1/1200 model has strengthened masts) ... [click here for more] |
Long Face Games |
$4.88
|
A set of STL files representing the tug “Ajax” which was taken into naval service as the Confederate steamer “Resoliute”. She accompanied the CSS Atlanta at the battle of Wassaw Sound on 17th June 1863. She is representative of many similar vessels used by both sides. Two variants are supplied, one armed, the other in her original configuration. The model is scaled to 1/600 and prints well... [click here for more] |
Long Face Games |
$3.66
|
A 3D model file representing the Confederate gunboat “Selma” (originally the steamboat “Florida”) which was converted on Lake Ponchartrain and served at Mobile, Alabama. The STL file is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$4.88
|
A 3D model file representing the Confederate gunboat CSS Teaser which served for a time as the support craft for the CSS Virginia She was captured by the Union and then served as USS Teaser. The model is scaled at 1/600, scale to 50% in your slicer for 1/1200. ... [click here for more] |
Long Face Games |
$2.44
|
An STL file representing the Confederate gunboat “Tuscarora”, which served on the Mississippi at New Orleans and which took part in the Battle of Head of Passes with Manassas, Calhoun, Ivy, and others in October 1861. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.66
|
An STL model file representing the Confederate casemate ironclad “Atlanta” which operated on the Wilmington river and was captured at the battle of Wassaw Sound on 17th June 1863. After capture she served in the US Navy for the rest of the civil war. She was later sold to Haiti, but sank on her delivery voyage. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.66
|
A generic model of a French or British armoured battery from the Crimean War. The model is based loosely on the Dévastation class of batteries used by the French and British in the Black Sea, most notably at the battle of Kinburn. The model is scaled for 1/2400 and was created to accompany my models from Figurehead and Tumbling Dice ... [click here for more] |
Long Face Games |
FREE
|
A 3D model file representing the Royal Navy's steam gunboat HMS Amethyst. One of a class of six ships, HMS Amethyst fought with HMS Shah against the Peruvian ironclad Huascar when she had been commandeered by anti government rebels. The model is scaled at 1/600. Two variant hulls are included, representing the two batches of ships. ... [click here for more] |
Long Face Games |
$3.66
|
A 3D model file representing the Royal Navy's iron-hulled steam frigate HMS Shah. One of a class of three ships, HMS Shah fought with HMS Amethyst against the Peruvian ironclad Huascar when she had been comandeered by anti government rebels. The S|TL files are scaled at 1/600 ... [click here for more] |
Long Face Games |
$3.66
|
A set of STL files representing the Swedish coastal defence monitors of the “Hildur” class, seven vessels completed between 1872 and 1875. Six ships were completed with the main gun firing forward, the seventh, Folke, had her gun pointing aft. The STL files are scaled for printing in 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.66
|
A set of two 3D model files representing the “tower ships” designed by John Roy that were building at New Orleans. Up t six ships were planned but none were completed. Two models are included, one with an exposed stern wheel, the other with the stern wheel enclosed. The models are sized at 1/600. Scale by 50% in your slicer for 1/1200. ... [click here for more] |
Long Face Games |
$4.88
|
A set of STL files of markers for "He Hemetera Thalassa, Mare Nostrum" - "Out of Formation", "Wavering" and "Crumbling" morale. They are sized to be stuck on a UK 2 pence piece, but can be resized to fit washers or other coins to suit. ... [click here for more] |
Long Face Games |
FREE
|
A set of 1/2400 3d printed STL files of medieval cogs and galleys in various sizes, for use with LFG's "Lord of the Sea" medieval naval rules ... [click here for more] |
Long Face Games |
FREE
|
A set of STL files of melee modifier markers for "He Hemetera Thalassa, Mare Nostrum" . VAriants are included for upright and horozonlay Roman numerals. They are sized to be stuck on a UK 2 pence piece, but can be resized to fit washers or other coins to suit. ... [click here for more] |
Long Face Games |
FREE
|
A set of 1/2400 3d printed STL files of generic ancient merchant ship. Three ships per base, designed for use with LFG's "He Hemetera Thalassa, Mare Nostrum" rules but can be used with other sets of rules as well. ... [click here for more] |
Long Face Games |
FREE
|
A set of 3D files representing a Union mortar raft, and a Mississippi flatboat, often used to transport cargo downriver (3 variants provided) STL files is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$3.66
|
A set of nine3D model files representing the Paraguayan squadron at the battle of Riachuelo. The survivors would go on to fight through the rest of the war.
Salto Orientale
Jejui
Ypora
Ibera
Iguery
Tacuari
Paraguari
Olinda
Pirabebe
Also included is the Paraguayan Chata floating gun platform from the ironclad set
The models are scaled for 1/600, Set your slicer to 50% for 1/1200. ... [click here for more] |
Long Face Games |
$24.41
|
A set of 3D model files representing the US Navy’s PC-461 class sub chaser. They were used in the Pacific, Atlantic, Mediterranean and .Caribbean, serving as anti submarine ships, patrol ships and gunboats supporting coastal forces. A one piece model is scaled to 1/600, with a second model with separate mast and crane scaled to 1/300. ... [click here for more] |
Long Face Games |
$3.66
|
A 3D model file of the Peruvian casemate ironclad “Loa”. Based on contemporary Confederate designs, the ship was based in Callao and fought against the Spanish during the Chincha Island War of 1866. During the War of the Pacific she remained at Callao as a training and stores ship, but she makes a useful “what if?” for WotP campaigns. The model is scaled at 1/600, and prints well at 1/1200... [click here for more] |
Long Face Games |
$3.66
|
A set of 3D model files representing the Peruvian monitor Atahualpa and her sister ship Manco Capac. Both ships were US “Canonicus” class monitors purchased after the end of the Civil War. Both ships served in the Peruvian Navy during the War of the Pacific.. Two models are included, one with the hurricane deck rigged, the other without. The models are scaled at 1/600 but will print at 1/1200 as... [click here for more] |
Long Face Games |
$3.66
|
Log In 
