Close
Close
Browse Categories
 Publisher Info
 Follow Your Favorites!
NotificationsSign in to get custom notifications of new products!







Publisher
der Kampfflieger   Remove Search Term
Advanced Search >

 
 Hottest Titles from der Kampfflieger
Selected Products
 
 Newest Titles in This Section
Products found in this section... Sort by: 
 Title    Publisher    Price  
1/100 (15mm) Heinkel He-177 Greif paper model

1/100 (15mm) Heinkel He-177 Greif paper model


1/100 (15mm) paper model of Heinkel He-177 Greif heavy bomber. The Heinkel He 177 Greif (Griffin) was a long-range heavy bomber flown by the Luftwaffe during World War II. The He 177 was the only operational long-range heavy bomber available to the Luftwaffe during the war years that had a payload/range capability similar to the four-engined heavy bombers flown by the USAAF and RAF in the European...   [click here for more]
der Kampfflieger  $7.50 $4.99

Add to Wargame Vault Order  
1/48 Fiat Br.20 (47 Squadriglia) paper model

1/48 Fiat Br.20 (47 Squadriglia) paper model


1/48 paper model of Fiat Br.20 flown at 47 Squadriglia, 37 Gruppo, 18 Stormo of Royal Italian Air Force, Italy, 1939. The Fiat BR.20 Cicogna (Italian: "stork") was a low-wing twin-engine medium bomber that was developed and manufactured by Italian aircraft company Fiat. It holds the distinction of being the first all-metal Italian bomber to enter service; at the time, it was regarded as one of the...   [click here for more]
der Kampfflieger  $6.50 $5.50

Add to Wargame Vault Order  
1/48 Hanriot HD.1 (5e Escadrille) paper model

1/48 Hanriot HD.1 (5e Escadrille) paper model


1/48 paper model of Hanriot HD.1 in Belgian livery (5e Escadrille). The Hanriot HD.1 was a French World War I single-seat fighter aircraft. Rejected for service with French squadrons in favour of the SPAD S.7,[1] the type was supplied to the Belgian and the Italian air forces with whom it proved highly successful. Of a total of about 1,200 examples built, 831 were in fact produced by Italian companies...   [click here for more]
der Kampfflieger  $4.50

Add to Wargame Vault Order  
1/48 Hanriot HD.1 (Austro-Hungary) paper model

1/48 Hanriot HD.1 (Austro-Hungary) paper model


1/48 paper model of Hanriot HD.1 in Austro-Hungarian livery The Hanriot HD.1 was a French World War I single-seat fighter aircraft. Rejected for service with French squadrons in favour of the SPAD S.7,[1] the type was supplied to the Belgian and the Italian air forces with whom it proved highly successful. Of a total of about 1,200 examples built, 831 were in fact produced by Italian companies under...   [click here for more]
der Kampfflieger  Pay What You Want

Add to Wargame Vault Order  
1/48 Hanriot HD.1 (Italian livery) paper model

1/48 Hanriot HD.1 (Italian livery) paper model


1/48 paper model of Hanriot HD.1 in Italian livery flown by Mario Fucini. The Hanriot HD.1 was a French World War I single-seat fighter aircraft. Rejected for service with French squadrons in favour of the SPAD S.7,[1] the type was supplied to the Belgian and the Italian air forces with whom it proved highly successful. Of a total of about 1,200 examples built, 831 were in fact produced by Italian...   [click here for more]
der Kampfflieger  $4.50

Add to Wargame Vault Order  
1/48 Hanriot HD.1 (Jan Olieslagers) paper model

1/48 Hanriot HD.1 (Jan Olieslagers) paper model


1/48 paper model of Hanriot HD.1 in Belgian livery flown by Jan Olieslagers. The Hanriot HD.1 was a French World War I single-seat fighter aircraft. Rejected for service with French squadrons in favour of the SPAD S.7,[1] the type was supplied to the Belgian and the Italian air forces with whom it proved highly successful. Of a total of about 1,200 examples built, 831 were in fact produced by Italian...   [click here for more]
der Kampfflieger  $4.50

Add to Wargame Vault Order  
1/48 Hanriot HD.1 (Swiss livery) paper model

1/48 Hanriot HD.1 (Swiss livery) paper model


1/48 paper model of Hanriot HD.1 in Swiss livery. The Hanriot HD.1 was a French World War I single-seat fighter aircraft. Rejected for service with French squadrons in favour of the SPAD S.7,[1] the type was supplied to the Belgian and the Italian air forces with whom it proved highly successful. Of a total of about 1,200 examples built, 831 were in fact produced by Italian companies under licence....   [click here for more]
der Kampfflieger  $4.50

Add to Wargame Vault Order  
1/48 Hanriot HD.1 (US livery) paper model

1/48 Hanriot HD.1 (US livery) paper model


1/48 paper model of Hanriot HD.1 in US livery. The Hanriot HD.1 was a French World War I single-seat fighter aircraft. Rejected for service with French squadrons in favour of the SPAD S.7,[1] the type was supplied to the Belgian and the Italian air forces with whom it proved highly successful. Of a total of about 1,200 examples built, 831 were in fact produced by Italian companies under licence....   [click here for more]
der Kampfflieger  $4.50

Add to Wargame Vault Order  
1/48 Hanriot HD.1 (Venezuelian livery) paper model

1/48 Hanriot HD.1 (Venezuelian livery) paper model


1/48 paper model of Hanriot HD.1 in Venezuelian livery. The Hanriot HD.1 was a French World War I single-seat fighter aircraft. Rejected for service with French squadrons in favour of the SPAD S.7,[1] the type was supplied to the Belgian and the Italian air forces with whom it proved highly successful. Of a total of about 1,200 examples built, 831 were in fact produced by Italian companies under...   [click here for more]
der Kampfflieger  $4.50

Add to Wargame Vault Order  
1/48 Hanriot HD.1 (Willy Coppens) paper model

1/48 Hanriot HD.1 (Willy Coppens) paper model


1/48 paper model of Hanriot HD.1 in Belgian livery flown by Willy Coppens. The Hanriot HD.1 was a French World War I single-seat fighter aircraft. Rejected for service with French squadrons in favour of the SPAD S.7,[1] the type was supplied to the Belgian and the Italian air forces with whom it proved highly successful. Of a total of about 1,200 examples built, 831 were in fact produced by Italian...   [click here for more]
der Kampfflieger  $4.50

Add to Wargame Vault Order  
1/48 Heinkel He-177 Greif paper model

1/48 Heinkel He-177 Greif paper model


1/48 paper model of Heinkel He-177 Greif heavy bomber. The Heinkel He 177 Greif (Griffin) was a long-range heavy bomber flown by the Luftwaffe during World War II. The He 177 was the only operational long-range heavy bomber available to the Luftwaffe during the war years that had a payload/range capability similar to the four-engined heavy bombers flown by the USAAF and RAF in the European theatre;...   [click here for more]
der Kampfflieger  $10.50 $7.99

Add to Wargame Vault Order  
1/48 Sopwith Camel Comic kit

1/48 Sopwith Camel Comic kit


1/48 3D paper model of Sopwith Camel Comic, WWI British night fighter. The "Comic" was a Camel variant designed specifically for night-fighting duties. The twin Vickers guns were replaced by two Lewis guns on Foster mountings firing forward over the top wing, as the muzzle flash of the Vickers guns could blind the pilot. To allow reloading of the guns, the pilot was moved about 12 inches (30 cm)...   [click here for more]
der Kampfflieger  $15.00

Add to Wargame Vault Order  
1/72 3D Fokker E.V kit

1/72 3D Fokker E.V kit


1/72 (25 mm) 3D paper model of Fokker E.V/D.VIII, WWI German fighter. The Fokker E.V was a German parasol-monoplane fighter aircraft designed by Reinhold Platz and built by Fokker-Flugzeugwerke. It entered service with the Luftstreitkrafte in the last months of World War I. After several fatal accidents due to wing failures, the aircraft was modified and redesignated Fokker D.VIII. Dubbed the Flying...   [click here for more]
der Kampfflieger  $8.95

Add to Wargame Vault Order  
1/72 3D RAF F.E.8 kit

1/72 3D RAF F.E.8 kit


1/72 (25 mm) 3D paper model of RAF F.E.8, WWI British pusher fighter. Royal Aircraft Factory Fighting Experimental Model 8 (FE8) The Royal Aircraft Factory was owned by the War Ministry, and was tasked with developing military aircraft for the British Empire. One of their products was the FE8 single-seat fighter. Of pusher configuration, and armed with a single Lewis gun in the nose, the FE8 was...   [click here for more]
der Kampfflieger  $6.95

Add to Wargame Vault Order  
15 mm 3D Panzerjager E-10

15 mm 3D Panzerjager E-10


15 mm 3D paper model of German secret tank destroyer project. The E-10, a prototype panzerjager (tank destroyer) designed in Germany as a replacement for the Hetzer 38t-series of tank destoyers. Designed to use the proposed E-series chassis and drive components, the E-10, had it gone into production, was to be armed with a 75mm main cannon. A unique feature of the design was to give it a "kneeling"...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
15mm (1/100) 3D Martin-Baker 12 gun fighter

15mm (1/100) 3D Martin-Baker 12 gun fighter


15mm (1/100) 3D paper model of Martin-Baker 12 gun fighter project. In 1938, the British firm Martin-Baker submitted a design study for a long-range twin-engine fighter, featuring a 12-machine gun main armament. Countries around the world were studying the concept of big long- range fighters to act as escorts for bomber raids deep into enemy territories. One design that went into production was...   [click here for more]
der Kampfflieger  $4.50

Add to Wargame Vault Order  
15mm (1/100) 3D Ta-183

15mm (1/100) 3D Ta-183


15mm (1/100) 3D paper Focke-Wulf Ta-153. This paper model from der Kampflieger lets the builder explorer several what-if marking schemes for the Focke-Wulf TA-183 jet fighter concept. In late 1942, the Focke-Wulf design team headed by Kurt Tank began sketching out concepts for swept-wing fighters built around the newly-developed turbojet engines. The TA-183 Design II concept called for a short...   [click here for more]
der Kampfflieger  $4.50

Add to Wargame Vault Order  
15mm 3D Daimler Dingo

15mm 3D Daimler Dingo


15 mm 3D paper model of British scout car Daimler Dingo Mk.II. The Daimler Scout Car, known in service as the "Dingo" (after the Australian wild dogs), was a British light fast 4WD reconnaissance vehicle also used in the liaison role during the Second World War. The Dingo was first used by the British Expeditionary Force (1st Armoured Division and 4th Northumberland Fusiliers) during the Battle...   [click here for more]
der Kampfflieger  $5.50

Add to Wargame Vault Order  
15mm 3D Noratlas

15mm 3D Noratlas


15mm 3D Nord 2501 Noratlas paper model The Noratlas Nord 2501 gained fame during the Suez Crisis of 1956, when French paratroopers dropped over the south of Port Said and Port Fouad in Egypt. Noratlas used by many countries as transport aircraft. Kit include six liveries: two French, Germany, Portugal, Israel and Greece. As unit could be used in Arab-Israeli wars, Suez Crizis,...   [click here for more]
der Kampfflieger  $6.50

Add to Wargame Vault Order  
15mm 3D Sturmtiger

15mm 3D Sturmtiger


15mm 3D paper model of Sturmorserwagen 606/4 mit 38 cm RW 6, more known as Sturmtiger. Self-propelled 380 mm mortair used in 1944-45 at Western and Eastern fronts. Few Sturmtigers was used to bombardment rising Warsaw. Three-page download. ...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
Lost Eagles vol.1

Lost Eagles vol.1


Reference book about WWI experimental aircraft. 10 airplanes from Great Britain, France, Russia, Austro-Hungary, Germany are described. Book include a breif history, data, scale plans, photos, color profiles and one 1/72 (28 mm) card model. ...   [click here for more]
der Kampfflieger  $4.90

Add to Wargame Vault Order  
Lost Eagles vol.2

Lost Eagles vol.2


Reference book about WWI experimental aircraft. 20 rare, unusual, strange and ugly aircraft from Great Britain, France, Italy, US, Austro-Hungary, Germany are described. Book include a breif history, data, scale plans, photos, color profiles and one 1/72 (28 mm) card model. ...   [click here for more]
der Kampfflieger  $12.90

Add to Wargame Vault Order  
Mitsubishi Ki-30 paper model

Mitsubishi Ki-30 paper model


1/144 and 1/200 Mitsubishi Ki-30 Ann paper model. First used operationally in China during 1938, the Ki-30s proved to be most effective, for in that theatre they had the benefit of fighter escort. The situation was very much the same at the beginning of the Pacific war, but as soon as the Allies were in a position to confront unescorted Ki-30s with fighter aircraft they immediately began to suffer...   [click here for more]
der Kampfflieger  $0.99

Add to Wargame Vault Order  
1/144 3D Siemens-Schuckert R.I

1/144 3D Siemens-Schuckert R.I


1/144 (12 mm) 3D paper model of siemens-Schuckert R.I, WWI German bomber. Siemens-Schukert built a series of similar aircraft to meet the German Army's requirements for a class of airplane called "Riesenflugzeug" (literally, 'giant aircraft'). Riesenflugzeug were intended to operate independently on long-range, long-endurance strategic bombing and reconnaissance missions. SSW's R-I through R-VII...   [click here for more]
der Kampfflieger  $3.95

Add to Wargame Vault Order  
1/200 3D Bloch MB.200

1/200 3D Bloch MB.200


1/200 3D paper Bloch mb.200 The Bloch MB 200 was a French day/night bomber, first designed in 1932 and produced in France and Czechoslovakia (under license). Some aircraft were still serving in both countries air forces when World War Two began. A transitional design, the MB 200 had fully cantilevered wings, a closed cockpit, and was of mostly metal construction, but still had fixed landing gear....   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
1/72 3D Blackburn Kangaroo

1/72 3D Blackburn Kangaroo


First Kangaroo card model ever! Well-known WWI anti-submarine aircraft 1/72 scale! Model has detailed cockpits. ...   [click here for more]
der Kampfflieger  $3.95

Add to Wargame Vault Order  
1/72 3D Caproni Ca.3

1/72 3D Caproni Ca.3


1/72 (25 mm) 3D paper model of Caproni Ca.3, WWI Italian bomber. The development of the Ca.1 to the Ca.2 suggested the benefits of increasing amounts of power to the very sound airframe. The Ca.3 was a development of Ca.2, by replacing the two engines mounted on the booms with the same Isotta-Fraschini engine that had been used as the central, pusher engine on that design. The prototype flew in late...   [click here for more]
der Kampfflieger  $3.95

Add to Wargame Vault Order  
1/72 3D Fokker D.VII

1/72 3D Fokker D.VII


1/72 (25 mm) 3D paper model of Fokker D.VII, WWI German fighter. The Fokker D.VII was a World War I fighter aircraft designed by Reinhold Platz of the Fokker- Flugzeugwerke. Germany produced almost 2,000 D.VII aircraft in the summer and fall of 1918. In service, the D.VII quickly proved itself superior to existing Allied fighters, leading to a second Fokker Scourge. Perfect for the WWI air games...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
1/72 3D Gotha G.I

1/72 3D Gotha G.I


1/72 (25 mm) 3D paper model of Gotha G.I, WWI German bomber. First of the famous family! The first G.I flew in July 1915 followed by a further 17 of these three seater machines. While the prototype used two 160hp Mercedes D Ills, the production aircraft employed two 150hp Benz Bz Ills. mounted on the lower wing. Perfect for the WWI air games like Canvas Eagles. Text written by Bart Wheeler, copyright...   [click here for more]
der Kampfflieger  $3.95

Add to Wargame Vault Order  
1/72 3D Hanriot H.D.3

1/72 3D Hanriot H.D.3


The Hanriot HD-3 was a French two-seat fighter, designed around the water-cooled, 260-horse Salmson 9z radial engine. Heavily armed with twin forward firing Vickers guns in front of the pilot, and with twin Lewis guns protecting the tail, the HD-3 would have been a formidable multi-role aircraft, but the Armistice was signed before it entered large-scale service. ...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
1/72 3D Nieuport 11 kit

1/72 3D Nieuport 11 kit


1/72 (25 mm) 3D paper model of Nieuport 11 Bebe, WWI French fighter. The Nieuport 11, often nicknamed the Bebe, was a French World War I single seat fighter aircraft, designed by Gustave Delage. It is famous as one of the aircraft that ended the 'Fokker Scourge' in 1916. This small, lightly loaded sesquiplane outclassed the Fokker Eindekker in practically every respect. Now 11 Nieuport 11s under...   [click here for more]
der Kampfflieger  $8.95

Add to Wargame Vault Order  
1/72 3D Sopwith Baby kit

1/72 3D Sopwith Baby kit


1/72 (25 mm) 3D paper model of Sopwith Baby, WWI British floatplane. The Sopwith Baby was a single-seat floatplane, developed from Sopwith's earlier Schneider floatplane racer. It differed from the Schneider primarily in having a different engine fit and cowl. Babies were built by several manufacturers with a number of small detail changes. In common with other Sopwith designs, some aircraft had...   [click here for more]
der Kampfflieger  $8.95

Add to Wargame Vault Order  
1/72 3D Wight Quadruplane

1/72 3D Wight Quadruplane


The Wight Quadruplane was designed and developed in 1916. Powered by a 110hp Clerget 9Z rotary, the single Wight Quadruplane built underwent a number of rebuilds and redesigns between 1916 through 1917, but flight characteristics remained unsatisfactory and the type was never developed any further. Rare experimental RFC one, perfect for the WWI rare birds collection! ...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
1/72 Pfalz D.XII kit

1/72 Pfalz D.XII kit


1/72 (25 mm) 3D paper model of Fokker E.V/D.VIII, WWI German fighter. The Pfalz D.XII was a German fighter aircraft built by Pfalz Flugzeugwerke. Designed by Rudolph Gehringer, the D.XII entered service in significant numbers near the end of the First World War. It was the last Pfalz aircraft to see widespread service. Though the D.XII was an effective fighter aircraft, it was overshadowed by the...   [click here for more]
der Kampfflieger  $8.95

Add to Wargame Vault Order  
15 mm 3D STZ-5 tractor

15 mm 3D STZ-5 tractor


15 mm 3D paper model of Soviet STZ-5 artillery tractor. Model include two liveries (green Soviet one and a gray German war prize). Perfect transport for the WWII Eastern Front. Two one-page files. Text written by Bart Wheeler, copyright 2011, Bart Wheeler and Ecardmodels.com. Used by permission. ...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
15mm (1/100) 3D Focke-Wulf P.V

15mm (1/100) 3D Focke-Wulf P.V


15mm (1/100) 3D paper Focke-Wulf P.V Der Kampflieger presents a customizable paper model of a Focke-Wulf proposal for a jet fighter! The P.V. was also known as the TA-183 Design III. It differed from Design II (also known as the TA-183 Huckbein, also available from der Kampflieger) in having wings with a shallower degree of sweepback and a more conventional tail, with stabilizers mounted low on...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
15mm (1/100) 3D Vultee Vengeance

15mm (1/100) 3D Vultee Vengeance


15mm (1/100) 3D paper Vultee Vengeance The Vultee Vengeance was designed as a battlefield dive bomber at the request of France's Armee de L'Air, based on Allied analysis of the effectiveness of the Junkers Stuka as employed by the Luftwaffe in close support of armored forces. Model depicts a Vengeance in RAAF service. Easy one page download. Text written by Bart Wheeler, copyright...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
15mm (1/100) 3D Westland 40/46

15mm (1/100) 3D Westland 40/46


15mm (1/100) 3D paper Westland 40/46. The British Air Ministry issued Specification 40/46 for a jet fighter. Der Kampflieger brings to life a proposal from Westland Aircraft to meet this specification to the paper modelling world. Westland had gained considerable experience in designing flying-wing aircraft during the 30s with their Pterodactyl series of testbed aircraft, and their proposal reflected...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
15mm 3D Leyland Lorry

15mm 3D Leyland Lorry


15mm 3D paper model of Leyland RAF type lorry. Model represents a classic British WWI lorry. Easy two-page download. ...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
15mm 3D Rolls Royce AC

15mm 3D Rolls Royce AC


15 mm 3D paper model of Rolls Royce pattern 1924 armoured car. Model represents armoured car "Ajax" used for the defence of Habbania air base in Iraq in 1940. Easy one-page download. ...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
15mm 3D SU-85

15mm 3D SU-85


15mm 3D model of SU-85 Soviet self-propelled gun. Developed in 1943 SU-85 used till the end of war as mobile anti-tank weapon. 'SU' stands for the Russian: Samokhodnaya Ustanovka - self-propelled carriage, while "85" signifies the bore of the vehicle's armament, the 85 mm D-5T gun. Kit include two models - in summer (green) and winter (white) camo. ...   [click here for more]
der Kampfflieger  $4.50

Add to Wargame Vault Order  
Messerschmitt Me-410 paper model

Messerschmitt Me-410 paper model


1/144 and 1/200 Messerschmitt Me-410 paper model. The Messerschmitt Me 410 Hornisse ("Hornet") was a German heavy fighter and Schnellbomber used by Luftwaffe during World War II developed from the badly flawed Me 210. Essentially a straightforward modification of that type, the Me 210 had garnered such a negative reputation it was renamed the Me 410 to avoid association with its predecessor. Easy-to-build...   [click here for more]
der Kampfflieger  $0.99

Add to Wargame Vault Order  
1/72 3D Aviatik 30.40

1/72 3D Aviatik 30.40


1/72 (25 mm) 3D paper model of Aviatik 30.40, WWI Austro-Hungarian experimental fighter. Paper model is of the Aviatik 30.40A, an Austro Hungarian experimental parasol monoplane derivative of the Aviatik 30.27. The Aviatik 30.40 was powered by a similar 160hp Steyr Le Rhone 11-cylinder rotary engine, and only one prototype was built and flown during the summer of 1918. The Aviatik 30.40 was of wooden...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
1/72 3D Halberstadt Cl.IV

1/72 3D Halberstadt Cl.IV


1/72 (25 mm) 3D paper model of Halberstadt Cl.IV German two-seat fighter and ground attack aircraft. The Halberstadt CL.IV was developed from the company's earlier CL.II design. The CL designation was for a class of two-seater that was to be lighter and more manueverable, to act as escorts to regular C-type two-seaters. It was found that the CL machines made effective ground-attack machines, and...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
1/72 3D Hansa-Brandenburg D.I

1/72 3D Hansa-Brandenburg D.I


1/72 (25 mm) 3D paper model of Hansa-Brandenburg D.I, WWI Austro-Hungarian fighter. Biplane fighter, a design of Ernst Heinkel. The most notable feature of the D I was the 'Spider' arrangement of the wing struts; the four struts crossed at a point between the wings. The deep front fuselage inhibited the view of the pilot, and the D I was unstable. 95 built. Perfect for the WWI air games like Canvas...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
1/72 3D Nieuport 28

1/72 3D Nieuport 28


1/72 (25 mm) 3D paper model of Nieuport 28, WWI French fighter. Last of the WWI Nieuports flown by best US WWI ace Eddie Rickenbacker! Perfect for the WWI air games like Canvas Eagles. Easy one-page download. Text written by Bart Wheeler, copyright 2011, Bart Wheeler and Ecardmodels.com. Used by permission. ...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
1/72 Morane L and Pfalz A.II kit

1/72 Morane L and Pfalz A.II kit


1/72 (25 mm) 3D paper model of Morane L, WWI French aircraft. The Morane L, also called the 'Parasol' for the single wing over the crew, was a French-designed general-purpose military aircraft that saw wide use during the early years of World War One. Powered by a rotary engine, and carrying two crew in tandem (usually), the Type L had the distinction of being one of the first aircraft to be armed...   [click here for more]
der Kampfflieger  $7.95

Add to Wargame Vault Order  
15mm (1/100) 3D Heinkel P.1078

15mm (1/100) 3D Heinkel P.1078


15mm (1/100) 3D paper Heinkel P.1078. In 1944, a requirement was issued in Germany for an emergency jet fighter, a cheap-and-quick-to-produce single-engine design to complement the twin-engine Me-262 Schwalbe that was entering production. Heinkel submitted a design study for the 1078- a stubby machine built around a jet engine, armed with two 30mm cannon, and featuring swept wings with turned-down...   [click here for more]
der Kampfflieger  $2.50

Add to Wargame Vault Order  
15mm 3D Nakajima B6N Tenzan

15mm 3D Nakajima B6N Tenzan


15mm 3D paper model of Nakajima B6N Tenzan (Jill). Introduced in 1943 the B6N was a highly effective torpedo bomber. By the time it reached service, however the IJN had a shortage of experienced pilots; furthermore the United States Navy had already achieved air superiority over the Pacific. Thus the B6N never really had the opportunity to display its full potential. Model Include details for the...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
15mm 3D Pz.Kpfw.VI Konigstiger

15mm 3D Pz.Kpfw.VI Konigstiger


15mm 3D paper model of Pz.Kpfw.VI Ausf.B Konigstiger (Kingtiger). Heavy German tank, producet from 1944 till the end of war. Three-page download. ...   [click here for more]
der Kampfflieger  $3.50

Add to Wargame Vault Order  
Displaying 1 to 50 (of 87 items) Result Pages:  1  2  [Next >>] 
Select Page Number