Title |
Publisher |
Price ▲ |
 Thanks for the interest. This is a free SVG file containing some laser cut designs I created.
You can send these to a local laser cutting service to make (or use your own laser cutting machine, if you have one).
You may need to make some tweaks before sending them. I recommend using Inkscape because it is free.
The SVG file uses RGB Blue 255 for the cutting lines and RGB Green 255 for the Line... [click here for more] |
The Orbicular Ruins |
FREE
|
 Thanks for the interest. This is a free SVG file containing some laser cut designs I created.
You can send these to a local laser cutting service to make (or use your own laser cutting machine, if you have one).
You may need to make some tweaks before sending them to a laser cutting services (check the requirements of the service you are using). I recommend using Inkscape because it is free.
The... [click here for more] |
The Orbicular Ruins |
FREE
|

Red Line = Cut
Black Line = Engraving
This file contains AI and SVG formats for laser cutting.
For 2.5mm mdf
If you want them in physical form, follow us and write to us:
Follow us!
... [click here for more] |
RunicaWorkshop Mdf |
$0.50
|

Red Line = Cut
Black Line = Engraving
This file contains AI and SVG formats for laser cutting.
For 2.5mm mdf
Follow us!
... [click here for more] |
RunicaWorkshop Mdf |
$0.50
|
 Here is Battletech appropriate sizes for anything! The shape and size match up with official battletech maps at 30 X 34.240MM (microscopically bigger so that each side is exactly 17.24mm and is even more aesthetically pleasing than official bases). There are large bases for your huge ship models and weird custom mechs. 7 sizes included (1x, 2x, 3x, 3x (line), 4x, 4X (line), 7X). The files were... [click here for more] |
Cabal Coffers |
Pay What You Want
|

Here are some MDF files to cut out some 1 inch diameter objective tokens, for One Page Rules or any wargame! Just cut them out, glue them together and paint with some acrylic paint.
The objective starts out as white, then when someone takes the point you put a coin with the correct color. if the objective is stolen flip the coin. if it is lost remove the coin!
The files were created with lightburn,... [click here for more] |
Cabal Coffers |
Pay What You Want
|
 In this article you will find both engraving and cutting files to build a building. Cutting in the MDF wood material is recommended to do this.
... [click here for more] |
Supply Battalion |
$0.99
|
 In this article you will find both engraving and cutting files to build a building. Cutting in the MDF wood material is recommended to do this.
... [click here for more] |
Supply Battalion |
$0.99
|

Red Line = Cut
Black Line = Engraving
This file contains AI and SVG formats for laser cutting.
For 2.5mm mdf
Follow us!
... [click here for more] |
RunicaWorkshop Mdf |
$1.50
|

Red Line = Cut
Black Line = Engraving
This file contains AI and SVG formats for laser cutting.
For 2.5mm mdf
If you want them in physical form, follow us and write to us:
Follow us!
... [click here for more] |
RunicaWorkshop Mdf |
$1.50
|

Red Line = Cut
Black Line = Engraving
This file contains AI and SVG formats for laser cutting.
For 2.5mm mdf
Follow us!
... [click here for more] |
RunicaWorkshop Mdf |
$1.50
|

Red Line = Cut
Black Line = Engraving
This file contains AI and SVG formats for laser cutting.
For 2.5mm mdf
Follow us!
... [click here for more] |
RunicaWorkshop Mdf |
$1.50
|

Red Line = Cut
Black Line = Engraving
This file contains AI and SVG formats for laser cutting.
For 2.5mm mdf
Follow us!
... [click here for more] |
RunicaWorkshop Mdf |
$1.50
|

Red Line = Cut
Black Line = Engraving
This file contains SVG formats for laser cutting.
This content contains: 10mm, 15mm and 20mm tires.
For 2.5mm mdf
Follow us!
... [click here for more] |
RunicaWorkshop Mdf |
Pay What You Want
|
7 Blank Hex Sheets Whitefilled and Supplied in PDF Format.
A3 Sized
60 X 40 Hexes with placement grids drawn if you want to use them.
60 X 40 (Light Blue Covered ) Hexes with placement grids drawn if you want to use them.
40 X 40 Hexes with hex coordinates.
60 x 60 Hexes with
40 X 40 Hexes with hex coordinates.
Hex size is 0.8in or 2cm but u can easily scale since SVG and PNG formats are also supplied... [click here for more] |
Obscure Battles |
$2.99
|
 Blank SQUARE Sheets Whitefilled and Supplied in PDF and PNG Format.
60 X 40 Squares with hex coordinates
50 X 50 Square with hex coordinates
50 X 40 Square with hex coordinates
40 X 40 Square with hex coordinates
40 X 30 Square with hex coordinates
30 X 30 Square with hex coordinates... [click here for more] |
Obscure Battles |
$2.99
|
 These are Various unit icons supplied in Vector Format SVG , EPS, PS, PNG and PDF for your own wargaming needs.
You can use these counters to replace or even to extend your own board games such as October Wars, Mech War, Red Star / White Star, Arab-Israeli Wars, Gulf/Aegean Strike series of old board games.
You can simply print and play these editing values by hand
OR
Using a freeware tool... [click here for more] |
Obscure Battles |
$7.00 $2.99
|
Get 22 Modern Gun silhouettes to use in your project. Great for spot and filling up your inventory section.
Check out the preview!
All images seperated both with and without lables in ZiP file, acompanying PDF so you know what youre getting. Grunge Bk included.
You get PNG Files and SVG files. Great value and variety, you can also easily mix and match them for even more variety.
By... [click here for more] |
kirilot |
$2.99
|
 I created files in Lightburn to cut a Battle Tech Alpha Strike Battlefield Support tracker with your laser cutter in 3mm MDF wood. Cut the two pieces and then just glue together with wood glue. For added effect cover the front with a polyurethane from home depot and "bam" you have he fanciest way to track your tactical strikes! Sized for 1/2 inch mini dice to fit in the holes. The whole card is... [click here for more] |
Cabal Coffers |
$4.99
|
 These files are to use with a laser cutter on MDF wood board. The files were created in LightBurn and also include GC files for instant cutting with "Longer" style laser burners. With my model these curb great at 180 time and 100% power, but you may need to adjust to fit your model burner. There are 8 models of hex terrain to burn and the individual pieces are included in seperate files to burn replacements... [click here for more] |
Cabal Coffers |
$4.99
|
 This special bundle product contains the following titles. EDITABLE COLDWAR ERA EUROPEAN Air Unit Counters for replacement and extension of your own boardgames Regular price: $7.00 Bundle price: $2.50 Format: Watermarked PDF These are 8 FIGHTER and CLOSE SUPPORT unit icons supplied in Vector Format SVG , PNG and JPG for your own wargaming needs.
You can use... [click here for more] |
Obscure Battles |
$14.00 $5.00
|

Red Line = Cut
Black Line = Engraving
This file contains AI and SVG formats for laser cutting.
For 2.5mm mdf
If you want them in physical form, follow us and write to us:
Follow us!
... [click here for more] |
RunicaWorkshop Mdf |
$14.99
|