| Title ▲ |
Publisher |
Price |
3D Printable SciFi OpenLOCK Compatible Tiles for Gaming
Contains over over 90 models of walls, bases, gates and swap-able center pieces
Modular tiles within tiles, having created a variety of plain square base templates with empty middle slots. The middle slots allows the option to swap out different "center pieces" to suit different game set ups while allowing for greater variety. For example,... [click here for more] |
Project Mobius 3D Design |
$71.93
|
The 28mm card stock PDF ACS-117A Remora boarding craft is Finger and Toe’s basic vehicle for delivering a squad of armored troops to enemy dreadnoughts or space stations. The bay is large enough to carry a small platoon of unarmored soldiers once the assault troops have led the way. The ACS-117 comes in two color schemes: Fleet Gray and Planetary Air Force Blue. Included are parts to create... [click here for more] |
Finger and Toe Models |
$5.00
|
Barricades Basic Set is designed to give your miniatures the ultimate temporary fortification: build simple concrete Barricades or go all out and design a complete base!
Anything is possible with these easy-to-assemble modules. Most modules are buildable in under five minutes without any fuss. So, within the first hour, you could have half a base completed.
Three textures are available: green camouflage,... [click here for more] |
Paper Make iT ! |
$6.00
|
Expand your Starship deck plans with these cargo bay floor tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free... [click here for more] |
2nd Dynasty |
$8.79
|
Create your own starship deckplans with these corridor tiles! Allows the construction of starship or other sci-fi corridors. These double plate floor tiles are from the Corridors II set but can be used in combination with any OpenLOCK tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these... [click here for more] |
2nd Dynasty |
$4.95 $3.95
|
These wide corridors create a beautiful sci-fi aesthetic while providing more room for play with an x-ray look inside the walls. Crawlspace entrances and doorways included to create more access points.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery.... [click here for more] |
2nd Dynasty |
$19.95
|
These wide corridors create a beautiful sci-fi aesthetic perfect for diorama scenes or fully visualised play. Doorway variants and crawlspace entrances are included to create more access points.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These... [click here for more] |
2nd Dynasty |
$19.95
|
The Corridors of Fate contain modular walls, doors and floors that enable the creation of your own sci-fi/industrial terrain, be it the interior of a massive space-station or the industrial hub of a worn down factory, or anywhere in-between.
Files have been scaled for 28mm miniatures but, as with all 3d printable files, you have the ability to scale them up or down to suit your gaming... [click here for more] |
FoxCraft |
$15.00
|
Expand your Starship deck plans with this double bunk and lockers tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available... [click here for more] |
2nd Dynasty |
$3.09
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like... [click here for more] |
Fat Dragon Games |
$19.99 $14.99
|
E-Z BATTLEFIELDS: Starship Attack features nine 8"x10" tiles that have layered graphic options which allow you to customize each tile before printing. Add construction areas and blast damage as desired, or leave these layers off for a 'new' look to your surface. Also included are 3D gun turrets and asteroids, both featuring layered graphic options as well.
... [click here for more] |
Fat Dragon Games |
$6.99 $5.24
|
Expand your Starship deck plans with this galley tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable... [click here for more] |
2nd Dynasty |
$3.79
|
Expand your Starship deck plans with this hinged ramp tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from... [click here for more] |
2nd Dynasty |
$4.29
|
The last survivors of an alien race have escaped their dying star system and come to Earth. Their advanced technology allowed them to easily establish dominance over the Roman Empire. But with parts wearing out, no infrastructure, and small numbers maintaining power is another thing altogether...
Imperium Alieni puts you in the place of the aliens trying to hold on to power, or the humans who are... [click here for more] |
Irrational Number Line Games, LLC |
$1.99
|
Finger and Toe Models presents a modular freight and passenger space ship: MLTS: Karma Queen. This new 28mm PDF card stock set can be used as an objective or simply as terrain in your skirmish (or tactical) battles or roleplaying adventures. You can use one or any combination or all for the modules to create setting depending on your encounter. Skirmish among the modules being readied for assembly... [click here for more] |
Finger and Toe Models |
$8.00
|
Expand your Starship deck plans with these kitchenette tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from... [click here for more] |
2nd Dynasty |
$4.29
|
Expand your Starship deck plans with these ladder well tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from... [click here for more] |
2nd Dynasty |
$1.99
|
Expand your Starship deck plans with these lift and platform tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free... [click here for more] |
2nd Dynasty |
$1.99
|
Your table top troops need to get from orbit to the surface quickly! Now they can for a low cost in a disposable Orbit to Surface Gravity Assist Delivery Vehicle! Troops are held in place with artificial gravity harnesses as the craft only breaks acceleration when needed to guide and safely deliver the goods to the battle front. Three doors daisy petal out to allow quick deployment. Paper model... [click here for more] |
Michael The Haggard |
$5.00
|
Pillboxes and Corridors: a tool to create and print unfolded 3d models reproducing Sci-Fi Outposts.
With this tool you will be able to design your customized Sci-Fi Outpost. Drag the model from the library and the system will unfold it for you adding needed flaps for gluing it. Choose the Scale you use to play (28mm, 15mm, 10mm, 6mm, 2mm, or what you like more) and everything will be resized... [click here for more] |
Paper Make iT ! |
$5.90
|
Want a real squadron of 3 pirate aircrafts/spaceships for your modern/sci-fi adventures? Here it is! This set has 2 huge advantages: first, it is VERY EASY to build, and anyway, a step by step guide will help you if you are a total beginner; second, you choose how it will look, since it's a set of many fully independant pieces! You can build it the way you want or follow the proposed ways. The result... [click here for more] |
CoolStuff |
$1.00
|
Following the Barricades Basic Set, this Platforms Set is the perfect companion for you sci-fi lay-outs.
You will be able to create your personal lay-out thanks to 108 different tiles with anti-slip floor and warning lines differently located.
Tiles are formed in 1" grid squares, in 300dpi resolution, composing corridors and rooms from 1x1 to 4x4 and every combination between them.... [click here for more] |
Paper Make iT ! |
$3.00
|
Want a real squadron of 3 police aircrafts/spaceships for your modern/sci-fi adventures? Here it is! This set has 2 huge advantages: first, it is VERY EASY to build, and anyway, a step by step guide will help you if you are a total beginner; second, you choose how it will look, since it's a set of 14 fully independant pieces! You can build it the way you want or follow the proposed ways. The result... [click here for more] |
CoolStuff |
$1.00
|
This kit includes three large JPG files (300dpi, 24x36 inches) that you can print for your sci-fi skirmish miniatures games. Three designs are included: Federals v Scoundrels; Federals v Federals; Scoundrels v Scoundrels. Each design includes a 1" inch gridded central play area of thin "glowing" lines against a dark gray background. You can freely modify these JPGs in your... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Expand your Starship deck plans with this sofa set tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from Printable... [click here for more] |
2nd Dynasty |
$3.19
|
This battle mat features a 36" x 36" starfield. The stark beauty of deep space is a perfect background for any starfighter battle, and this uncluttered starfield won't distract from your miniatures or counters.
Two staging areas provide ample room for players to lay out cards, dice, counters and more.
Virtually any graphics program will open a TIF if you want to add a... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
This battle mat features a colorful 36" x 36" tactical display board.
Four color variations are included. Print your favorite. Print them all!
Virtually any graphics program will open a TIF if you want to add graphics or make other changes for personal use, and this is a universal file format so any print shop should be able to print directly from this file. This product... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
This battle mat features a 36" x 48" tactical display board, with a central playing area of 36" x 36" and staging areas on either side (each measuring 6" x 36"). This simple but colorful mat is the perfect background for any starfighter battle, and the uncluttered tactical display won't distract from your miniatures or counters.
Three color variations are... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
This battle mat features a central starfield of 36" x 36" and optional staging areas on either side (each measuring 6" x 36"), for a total size of 36" x 48". It's the perfect background for any starfighter battle.
Two color schemes are included.
Virtually any graphics program will open a TIF if you want to add graphics or make other changes for personal... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
This download includes a 36" x 36" starfield battle mat graphic. It's the perfect background for any starfighter battle.
Five different mat designs are included. Each has a different color scheme for its nebula, and four of the five mats feature a unique glowing tactical overlay (rays, frame, and/or central circle). One mat has no tactical overlay at all.
Virtually any... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
This battle mat features a 36" x 36" starfield, the perfect background for any starfighter battle. A bonus 36" x 48" mat is included, which features the yellow starfield design plus staging areas on either side for displaying cards, tokens and so on.
Three color schemes are included (yellow, purple and green).
Virtually any graphics program will open a TIF... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
This battle mat features a 36" x 36" starfield, the perfect background for any starfighter battle.
Three color schemes are included (green, red and yellow).
Virtually any graphics program will open a JPG file if you want to add graphics or make other changes for personal use, and this is a universal file format so any print shop should be able to print directly from... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
This battle mat features a 36" x 36" battle zone, the perfect background for any starfighter battle. Note that the hex patterns that appear in the battle zone are skewed and of no standard size, so the grid is decorative only and is not practical for hex-based play.
Staging areas are included for the placement of cards, tokens and other game components.
Three color schemes... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
Expand your Starship deck plans with these special stairs and railing tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available... [click here for more] |
2nd Dynasty |
$1.69
|
STAR TILES add a new dimension to boring miniature tiles...literally. We've combined 2D tiles with 3D props, allowing you to create a visually stunning tabletop for your players quickly and easily. This set includes 26 large 1" (25-28mm) scale 8"x8" tiles and enough 3D props to stock your starship or space station. All props are designed for the novice card modeler and can be built... [click here for more] |
Fat Dragon Games |
$7.99 $5.99
|
Create your own starship deckplans with these base tiles! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions, including two wall types and three floor tiles suitable for use with 28-32mm miniatures.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these... [click here for more] |
2nd Dynasty |
$8.99
|
Create your own starship deckplans with these corridor tiles! Allows the construction of starship or other sci-fi corridors. Includes high and low detail versions, two wall variants, a doorway, single and double tile variants, including intersections.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect... [click here for more] |
2nd Dynasty |
$14.99
|
Create your own starship deckplans with these corridor tiles! Allows the construction of starship or other sci-fi engineering sections.
Compatible with the OpenLOCK system created by and available at Printable Scenery. These tiles are the commercially available version of the kickstarter
Please note that these are STL files only! You will need a 3D printer or print service in... [click here for more] |
2nd Dynasty |
$14.99
|
Create your own gargantuan drive which could represent a gravity drive, power plant, or FTL drive for your Sci-Fi rpg or tabletop wargame! Comes in 2x2 square inch base and 4x4 square inch base varaints.
The model is designed to be printed in parts and assembled using OpenLOCK clips (available from printablescenery.com for free). The parts snap together for glueless assembly.
Compatible with the... [click here for more] |
2nd Dynasty |
$14.99
|
Create your own starship deckplans with these corridor tiles! Allows the construction of starship or other sci-fi habitation rooms and modules.
Compatible with the OpenLOCK system created by and available at Printable Scenery. These tiles are the commercially available version of the kickstarter
Please note that these are STL files only! You will need a 3D printer or print service... [click here for more] |
2nd Dynasty |
$14.99
|
Create your own starship deckplans with these tiles! Allows the construction of machinery perfect for an engineering section, computer server room or the like.
Compatible with the OpenLOCK system created by and available at Printable Scenery. These tiles are the commercially available version of the kickstarter tiles.
Please note that these are STL files only! You will need a 3D... [click here for more] |
2nd Dynasty |
$7.99
|
Expand your Starship deck plans with this standing controls tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free... [click here for more] |
2nd Dynasty |
$1.29
|
Imagine you are a future police captain patrolling a vast expanse of urban decay, knowing the roving gangs, marauders, and rebels are as well armed as you–and sometimes better armed. Would you want a big stick, an equalizer whose appearance would send the Slags running? Well, captain, the planetary guard has just transferred a few of their light close air support ships to the Urban Air Support... [click here for more] |
Finger and Toe Models |
$6.00
|
About The Gauntlet The Gauntlet is a sci-fi board game set on a drifting space ship wreck. The game has been designed to entertain, plus teach and develop leadership and teamwork skills.
This game is a 'Print & Play' product. You need to print the relevant board sections and tokens, plus any optional pieces you might want to upgrade the game with. Some simple and minor assembly... [click here for more] |
TFP Games |
$6.95 $4.63
|
Expand your Starship deck plans with these tubular corridor tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free... [click here for more] |
2nd Dynasty |
$12.49
|
Expand your Starship deck plans with these tubular doorway tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free... [click here for more] |
2nd Dynasty |
$4.29
|
This Add-On to the Barricades Set allows you to enhance the fire power of your squad. You get a light mobile structure that fits perfectly onto the Barricade shape. The Turret is provided with an internal removable platform so that you can choose to place more soldiers downstairs, in a protected level, or upstairs for a frontal firing line.
The Turret is designed in 300dpi with high quality textures... [click here for more] |
Paper Make iT ! |
$2.50
|
This Plug-In for Shuffler based tools (not included and at least one required) expands the internal image library with your own images.
No more limits to your imagination!
You can add every kind of image to increase variety of your maps or 3d unfolded models.
Features:
* Load gif, jpg, jpeg and png format images with transparency.
* Load an unlimited number of images from your local... [click here for more] |
Paper Make iT ! |
$4.90
|
Do you love making paper minatures of starships? Love big space battlewagons? Now here's your chance to build the iconic American battleship from FSpaceRPG.
This 20 pages booklet provides all the pieces you can print and and cut up and glue to form this 1 km long battleship to desktop scale including display stand.
Instructions and photos of an actual built version are included as references... [click here for more] |
FSpace Publications |
$2.99
|
Expand your Starship deck plans with this wall lockers tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free from... [click here for more] |
2nd Dynasty |
$1.69
|
Log In 
