| Title |
Publisher |
Price |
A 3D model file representing the Confederate casemate ironclad CSS Arkansas. One of the most famous ships of the war, Arkansas fought the Union warships Carondelet, Queen of the West and Tyler, ran past the Union fleet at Vicksburg and fought at Baton Rouge before being scuttled by her crew in August 1862. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.82
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Village Chapel is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into... [click here for more] |
Dave Graffam Models |
$5.95
|
A 3D model file representing the Confederate casemate ironclad CSS Charleston. She served as the flagship of the Charleston squadron until she was destroyed to prevent capture in 1865. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.82
|
The Royal Navy is the United Kingdom's naval warfare force and one of the oldest and most powerful navies in the world, with a history dating back over a thousand years. Today, it remains a highly capable modern navy, tasked with defending UK interests globally, supporting NATO, and carrying out humanitarian and peacekeeping missions. Its fleet includes aircraft carriers, submarines, destroyers, and... [click here for more] |
Scoutbush publishing |
$10.20
|
This is part of our navy miniatures range, the famous Admiral Kuznetsov!
The Admiral Kuznetsov is Russia's sole aircraft carrier, serving as the flagship of the Russian Navy. Commissioned in 1991, it was designed during the Soviet era with the primary role of supporting air defense for naval groups, rather than projecting air power like Western carriers. The carrier is equipped with a ski-jump ramp... [click here for more] |
Scoutbush publishing |
$3.00
|
A set of fast play rules and a campaign system based on LFG’s “Steamer Wars”, covering the 1866 naval campaign fought out on Lake Garda by the navies of Austria and Italy. The fast play nature of the rules and the campaign system that is also included allow the campaign to be fought out over a weekend or a few club nights.
The rules are supported by a small range of exclusive 3D models available... [click here for more] |
Long Face Games |
$9.56
|
A 3D model file representing the Confederate casemate ironclad CSS Chicora. She served as part of the Charleston squadron until she was destroyed to prevent capture in 1865. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.82
|
A 3D model file representing the Confederate casemate ironclad CSS Palmetto State. She served as part of the Charleston squadron until she was destroyed to prevent capture in 1865. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.82
|
A set of STL files representing the Confederate gunboat CSS Sampson. She served at Savannah Georgia and served a the battle of Port Royal in November 1861. The model is supplied in two variants, one armed as she was in Confederate service, the other unarmed to represent a typical steam tug. The models are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
Easy to build: This paper model kit is easy to assemble, requiring just 7 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler, black felt-tip pen and cutting mat. Optionally, you may make use of other common hobby tools for even better results. Full instructions are included.
28mm-30mm scale: This model is designed... [click here for more] |
Dave Graffam Models |
$4.95
|
An STL file representing the Confederate gunboat CSS Grampus. She served on the Mississippi river and served at the defence of Island No. 10, where she was burned to avoid capture on 7th April 1862. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
3D Print Ancient galleys for naval wargames. 1/600 scale. This set contains:
- 2 biremes types
- 3 triremes types
- 1 quinquireme
- 1 merchant boat (Roman) ... [click here for more] |
Voxelhouse |
$5.99
|
A set of 3D model files representing the seven ships of the Union’s “City” class of casemate ironclads, of which the Cairo was the first. The ships of the class fought on the Mississippi, two of the ships, Cairo and Baron de Kalb, were sunk by mines on the Yazoo River. Six models are included covering the standard design (USS Cairo) and two variants, USS Mound City, and USS Cincinnati. Each ... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the Confederate casemate ironclad CSS Tennessee. She was built to defend the port of Mobile and was the flagship of the squadron based there. She fought at the Battle of Mobile Bay in August 1864. She was captured and later served as the USS |Tennessee in the Mississippi. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
Naval warfare in the Age of Sail. The rules are written to cover the period 1740 - 1815, but can easily be used to fight actions before and after those dates. The new edition includes rule enhancements, improved graphics and a starter scenario. The intent here is to play multi-ship and full fleet actions. The rules take a much broader approach to combat and the allocation of damage then most rules... [click here for more] |
Crookedhead Games |
$5.95
|
An STL file representing the Confederate gunboat ram General Sumpter. She operated on the Mississippi and was part of the force that crippled the ironclad Cincinnati at the battle of Plum Point in May 1862. She was captured by the Union in August that year but was used for spare parts and eventually burned and scrapped shortly thereafter. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$2.95
|
A set of STL files representing Confederate floating gun batteries in three variants. The model is based on the well-known battery at Charleston with overhead protection Two lesser protected variants are also included. The models are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
Sail and Steam Navies is a miniatures rules system for fighting naval battles during the period of 1840 to 1880. These rules are designed for use with 1/600 scale waterline models but include options for use of 1/1200 scale models.
The basic rules are 40 pages long, which include charts, an example of play, and conversion information for 1/1200 scale. The Under Both Flags module adds six... [click here for more] |
David Brandon |
$19.95
|
An STL files representing a generic Union hospital ship. A number of such vessels operated with the Union riverine fleets, providing essential care for sailors and soldier wounded in combat. The model is scaled to 1/600 and prints well at 1/1200
. ... [click here for more] |
Long Face Games |
$3.82
|
This counter set is a great starting point for people wanting to get into Aerial Wargaming or those simply wishing to use counters instead of miniatures. Perfect to playtest rulesets or create a portable set to play your favourite rules on the go. Perfect for Check your 6, Missile Threat and C21. Included in this set are some of the main aircraft from the Korean War up to the end of the Cold War.... [click here for more] |
Pocket Warfare Publishing |
$10.50
|
A set of STL file representing the US Navy’s Landing Craft Support (LCS), based on the LCI(L) hull but significantly upgunned. The LCS was tasked with providing close fire support for amphibious landings, but was also called upon to provide escorts for convoys, conducting special operations and other missions. Two variants are included. The models are scaled at 1/600, but can be easily rescaled... [click here for more] |
Long Face Games |
$3.82
|
A 3D model file representing the Union steam sloop of war USS Hartford. One of the most famous ships of the Civil War, Hartford as Farragut’s flagship on the Mississippi and fought at New Orleans, Vicksburg and Mobile Bay The model is scaled to 1/600, and prints well at 1/1200 on a resin printer ... [click here for more] |
Long Face Games |
$3.82
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 3 sheets includes 98 counters. ... [click here for more] |
David Brandon |
$3.45
|
A set of STL files representing the many types of schooners that were used by both sides in the Civil War (and which are of use for other theatres of war as well. Three variants are included, one armed, one unarmed and one carrying a heavy mortar, typical of those used on the Mississippi. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
Building on Clash of Arms’ critically acclaimed Rising Sun, Steel Typhoon features 36 scenarios covering the biggest and most famous naval battles of WW II in the Pacific: Rabaul, Truk, the Marianas, Leyte, and Okinawa, plus hypothetical scenarios that challenge the players with historical alternatives. Designed by Ed Kettler, Steel Typhoon is the culmination of over... [click here for more] |
Admiralty Trilogy Group |
$16.00
|
An STL file representing the Union river gunboat Queen City. She was taken into service in 1863 and patrolled the Mississippi and Tennessee rivers In June 1864 the ship was surprised by a force of Confederate cavalry and artillery, leading to her capture. The Confederates burned and blew up the ship when the USS Tyler mounted a rescue attempt. The model is scaled to 1/600 and print well at 1/1200... [click here for more] |
Long Face Games |
$3.82
|
A set of STL files representing the following craft and supporting units
Austrian
Steamer Hess
Steamer Franz Josef
Wildfang Class Gunboat
“Venice” gunboat
Italian
Steamer Benaco
Steam gunboat class
Artillery Barge
Generic
Merchant Steamer
Pleasure Steamer
Shore batteries (2, 3 and 4 guns)
The models are scaled to 1/300 and print... [click here for more] |
Long Face Games |
$25.49
|
An STL file representing the Confederate gunboat ram “General Stirling Price” She operated on the Mississippi and was sunk by the Union ram “Queen of the West”. She was later raised and taken into Union service as the USS General Price. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 3 sheets includes 83 counters. ... [click here for more] |
David Brandon |
$3.45
|
A set of three STLs scaled to 1/600 covering some of the more popular torpedo craft of thr Civil War. The models included are the Union picket boat (Picket Boat No. 1 being notable as the craft used by Cushing to sink the Albemarle), and the Confederate "David" and "Squib" class vessels. The models are intended for printing at 1/600 but may work well in 1/1200 with resin printers. ... [click here for more] |
Long Face Games |
Pay What You Want
|
A 3D model file representing the Union river ironclad USS Benton. She was a converted snag boat and served on the Mississippi as a flagship. The STL files are scaled to 1/600, and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 3 sheets includes 143 counters. ... [click here for more] |
David Brandon |
$3.45
|
Wargame Fleets : 3000 BC to 1200 AD
The Perfect Compliment to 'He Hemetera Thalassa, Mare Nostrum'
Provides counters showing 27 Different boats from this era, including:
Early Galleys,
all of the Classical Tiremes and Polyremes,
Byantine and Arab ships,
Merchants in three sizes.
Coastal/ island terrain and damage / status counters.
Counters are 40mm x 40mm... [click here for more] |
Geoff Curran |
$6.00 $5.00
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 3 sheets includes 113 counters. ... [click here for more] |
David Brandon |
$3.45
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 5 sheets includes 173 counters. ... [click here for more] |
David Brandon |
$5.65
|
6mm building sets enough to create a small town.This set contains 18 buildings. Check the previews. ... [click here for more] |
IliadaGameStudio |
$5.00 $4.25
|
An STL file representing the Confederate armed tug CS Neptune. She joined the gunboat CS Bayou City in attacking the Union squadron at Galveston but was sunk. Three variants are included, one unarmed, one with deck guns and the third with guns and with cotton bale “armour”. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
A Full set of 4x4cm counters of medieval ships, damage counters and templates suitable for use with David Manley's Lord of the Sea(with permission from David)- these rules are also available on the Wargame Vault.
This set includes small, medium and large cogs (three variants of the latter two with catapults, cannon or trebuchet), carracks, nefs, hulks, balinger, large and boats,... [click here for more] |
Geoff Curran |
$5.26 $2.94
|
Naval Warfare : Age of Missiles : Supplement 1 : USA and Pact Forces
This supplement adds a broad range of ships for both USA and Pact forces including :
Carriers,
Ships of varying electronic warfare qualities (for balance)
patrol craft,
Fast attack craft,
Frigates,
Destroyers
Cruisers
and, for the USA, the IOWA class battleship.
Included are :
New rules : fully... [click here for more] |
Geoff Curran |
$6.37 $4.78
|
An STL file representing the Confederate gunboat “General Bragg” She operated on the Mississippi and helped to sink the Union ironclad “Cincinnati”. She was captured near Memphis and taken into Union service as the USS Bragg. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 4 sheets includes 175 counters. ... [click here for more] |
David Brandon |
$3.45
|
An STL file representing the US Navy's Landing Craft Infantry (Large), or LCI(L), in this case the “round con, side ramp” variant. The model is scaled at 1/600, but can be easily rescaled to 1/300 or 1/700 in your slicer software. ... [click here for more] |
Long Face Games |
$3.82
|
Three 3D model files representing generic blockade runners of the American Civil War. |Two is in original Confederate configuration, the third is armed to represent a vessel captured by the Union and pressed into service as a gunboat. The STL files are scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
This Multi-Layered PDF is a system of six inch wide (measured flat-to-flat) interlocking hex tiles with over 100 layer options that can be combined to create endless battlefields for any tabletop RPG or wargame. The different layers can be turned on or off to build up custom combinations. These layers include:
14 different Terrain Backgrounds (plus 6 Bonus Terrains)
Paved Roads, Dirt Roads,... [click here for more] |
Armor Grid Games and Miniatures |
$3.95
|
This product supports the Command at Sea (CaS) supplement Rising Sun, which provides scenarios covering the first half of WW II in the Pacific (December 1941 - November 1943). A Form 10 lists all the statistics for the ship, along with weapon ranges and hit chances, sensor ranges, maneuvering data, and a damage tracking form - all the information needed to use that ship in a CaS... [click here for more] |
Admiralty Trilogy Group |
$16.00
|
Naval Warfare : Galleys and Galleass
The set includes three sheets of counters depicting Renaissance ships of the followiung classes :
Small Galleys / Galliots , Galleys, Large Galleys / Lanterna , and Galleass.
There are different colours in each class, and blank boxes to allow players to add their own ID/ designations.... [click here for more] |
Geoff Curran |
$2.46
|
An STL file representing the revenue cutter Harriet Lane. She served initially with the Union Navy but was captured by the CS Bayou City during the Union attack on Galveston, serving with the Confederate fleet thereafter. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
A range of aige of sail ships , there is a single zip file containing all the models in the collection ... [click here for more] |
Twylite Games |
$20.33 $15.24
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$1.95
|
Log In 
