| Title |
Publisher |
Price |
Dawn of Iron - First Anthology
This 104-page anthology is a collection of all of this battlepacks and rules pubished for Dawn of Iron to date. If your either an old salt or fresh off a receiving boat, this anthology has a lot to offer.
This Anthology includes remastered content that was previously released:
Dawn of War: Rulebook
The Battle of... [click here for more] |
Scary Biscuits Studios |
$40.00 $30.00
|
Dawn of Iron: The American Civil War at Sea, is a game of naval combat, set during American Civil War (1861-1865). While many think of the war’s naval campaigns as a static blockade, the truth is that it was actually just as desperate and bloody as other aspects of the conflict. From the coastal regions of Virginia and the muddy rivers of the Mississippi Valley to the... [click here for more] |
Scary Biscuits Studios |
$19.00 $9.00
|
A set of wargames rules aimed at smaller scale figures, which will hopefully help you refight the wars of the later 19th century. They allow you to refight not merely the invasion of the Martians but have rules for building your own armoured trains and warships. They also allow you to design and built your own armoured fighting vehicles, taking advantage of all the modern technological advances you... [click here for more] |
Jim Webster |
$4.85
|
Dawn of Iron: Damn the Torpedoes! Battle of Mobile Bay Battle Pack
This Dawn of Iron battle pack expansion covers Admiral Farragut's brilliantly successful assault on Mobile Bay, Alabama in August 1864. The history and ships include the battle, where Farragut's wooden ships and monitors clashed with the most powerful Confederate ironclad ram ever built, the CSS Tennessee.
Inside... [click here for more] |
Scary Biscuits Studios |
$15.00 $12.00
|
Dawn of Iron: That Devil, the Arkansas Battle Pack
The attached battle pack expansion covers the successful career of the CSS Arkansas on the waters of the Mississippi River in 1862. The history and ships includes both the first duel with the USS Carondelet and Tyler on the Old River, and the Arkansas' daring run past the Union fleet outside Vicksburg. Inside you will find:
History... [click here for more] |
Scary Biscuits Studios |
$14.00 $10.00
|
Battles of Plum Point Bend and Memphis Battle Pack
The attached battle pack expansion covers the intense Battles of Plum Point Bend and Memphis in 1862. Inside you will find:
History & Maps of the Battles (8pgs)
2x Historical Scenarios (one each for Plum Point Bend and Memphis)
1x General Play Mission (inspired by the battles)
21x Ship Cards (covering all of the major ships in... [click here for more] |
Scary Biscuits Studios |
$10.00
|
This book follows on from ‘The Portable Wargame’ and ‘Developing The Portable Wargame’ to cover naval wargames that can be fought on a gridded tabletop. The book contains six sets of rules (three of which are from the ‘Portable Naval Wargame’ stable), four explanatory battle reports, and a chapter that explains ‘How to …’ build simple model American Civil War ironclads. Aimed mainly... [click here for more] |
Eglinton Books |
$4.85
|
Dawn of Iron: Battle of Albemarle Sound Battle Pack
The attached battle pack expansion covers the successful career of the CSS Albemarle in North Carolinian waters in 1864. The history and ships include both the battles of Plymouth and the Albemarle Sound, where the rebel ram acquitted herself well against the valiant, but vulnerable, Union blockade vessels. Inside you will find:... [click here for more] |
Scary Biscuits Studios |
$9.00 $7.50
|
Dawn of Iron: Battle of Cherbourg Battle Pack
The attached battle pack expansion covers the famous duel between the USS Kearsarge and CSS Alabama at the Battle of Cherbourg in 1864. Inside you will find:
History & Maps of the Battle (3pgs)
1x Historical Scenario
1x General Play Mission (inspired by the battle)
4x Ship Cards (Including the CSS Alambama and her predacesor CSS... [click here for more] |
Scary Biscuits Studios |
$7.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Village Chapel is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into... [click here for more] |
Dave Graffam Models |
$5.95
|
Pilot the Monitor against the Virginia, or run the guns of Vicksburg!
The clash of the ironclad gunships CSS Virginia and USS Monitor at the Battle of Hampton Roads on March 9, 1862 heralded a new age of naval warfare. The steam-powered engines introduced earlier in the century had already revolutionized the mobility of nineteenth-century ships, freeing vessels of their reliance on the caprice of winds,... [click here for more] |
Patrick Rael |
$12.95
|
Can't find a tabletop wargame opponent? This easily-readable guide provides the tools needed to undertake tabletop wargame campaigns without the need for other players. The guidelines presented within are designed to supplement your favorite wargaming rules set (not included). They can be bent or twisted, even broken and reformed, to suit a wargamer's needs. Novices and veterans alike can employ... [click here for more] |
Precis Intermedia |
$6.95
|
Special Ops is Multi-Man Publishing's magazine that provides coverage of MMP's line of products. Each issue has multiple articles covering several of MMP's product lines as well as ASL/ASLSK scenarios.
These are just the magazines, no game is included in the PDF version (only the physical print edition includes the game).
Articles for this issue:
INTERNATIONAL... [click here for more] |
Multi-Man Publishing |
$6.00
|
Special Ops is Multi-Man Publishing's magazine that provides coverage of MMP's line of products. Each issue has multiple articles covering several of MMP's product lines as well as ASL/ASLSK scenarios.
These are just the magazines, no game is included in the PDF version (only the physical print edition includes the game).
Articles for this issue:
PERHAPS... [click here for more] |
Multi-Man Publishing |
$6.00
|
A 3D model file representing the Union stern wheel casemate gunboat Fawn, which served on the Mississippi. The STL file is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$4.85
|
A set of 3D model files representing the Union stern wheel rams Lioness and Mingo which served with Admiral Porter’s fleet on the Mississippi. The STLs files are scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$4.85
|
A set of 3D files representing the Confederate gunboat Pee Dee, which served on the Pee Dee river in South Carolina. Files are included for 1/600 and 1/1200 scale models (1/1200 model has strengthened masts) ... [click here for more] |
Long Face Games |
$4.85
|
A 3D model file representing the Union stern wheel gunboat Signal, which served as a gunboat and dispatch vessel on the Mississippi. The STL file is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$4.85
|
A 3D model file representing the Confederate gunboat “Selma” (originally the steamboat “Florida”) which was converted on Lake Ponchartrain and served at Mobile, Alabama. The STL file is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$4.85
|
A set of 3D model files representing the c-Confederate gunboats “Morgan” and “Gaines” which served at Mobile, Alabama. Two sets of files are included, one set scaled for 1/600 the other (with slightly thickened masts for added strength) for 1/1200 ... [click here for more] |
Long Face Games |
$4.85
|
A 3D model file representing the Confederate gunboat “General Thompson”, part of the River Defense Fleet” on the Mississippi. STL file is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$3.64
|
Fighting Iron is a set of wargame rules for recreating naval battles during the era of Ironclads and Pre-Dreadnought battleships covering the time period of 1860 (the launch of the first ironclad) to 1906 (the launch of the first modern big gun, steam turbine driven battleships, HMS Dreadnought) including the American Civil War.
The rules can be used with various miniature scales ranging from 1/600... [click here for more] |
Rory Crabb |
$15.00
|
A 3D model file representing the Union stern wheel gunboat Cricket, which served on the Mississippi and was Admiral Porter’s flagship for a while. The STL file is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$4.85
|
A 3D model file representing the US Navy’s river gunboat “Lexington” The STL file is scaled for printing in 1/600. Set scale to 50% in your slicer to print at 1/1200 ... [click here for more] |
Long Face Games |
$4.85
|
Sail and Steam Navies is a miniatures rules system for fighting naval battles during the period of 1840 to 1880. These rules are designed for use with 1/600 scale waterline models but include options for use of 1/1200 scale models.
The basic rules are 40 pages long, which include charts, an example of play, and conversion information for 1/1200 scale. The Under Both Flags module adds six... [click here for more] |
David Brandon |
$19.95
|
A set of 3D model file representing the river gunboat “Queen of the West”. Two models represent the ship in her civilian guise, one unloaded, the second with a deck load of cotton bales. The third includes the forward casemate added when she was converted to a gunboat in US and then Confederate service. The STL files are scaled for printing in 1/600. Set scale to 50% in your slicer to print... [click here for more] |
Long Face Games |
$4.85
|
The Union States Navy river gunboat USS Tyler and Conestoga modelled as a set of three stl files for 3-D printing. The first represents the ship as built, the second with her subsequent upgunning whilst the third adds detail such as boats and awning rails. The models are scaled for 1/600 printing, but can be rescaled and printed at 1/1200 ... [click here for more] |
Long Face Games |
$4.85
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 3 sheets includes 98 counters. ... [click here for more] |
David Brandon |
$3.45
|
A set of two 3D model files representing typical riverboat steamers converted into gunboats during the American Civil War. Two variants are included. The models are scaled at 1/600, scale to 50% in your slicer for 1/1200. ... [click here for more] |
Long Face Games |
$4.85
|
This volume is the result of more than thirty years research, involving the many people, institutions, documents, books and records listed in the contents.
At date of publication presents the most up to date history of all those vessels of the Confederate States Navy, proposed, planned, started, not finished, and completed that had iron plating protection in one form or another.
So far as is... [click here for more] |
john w wallis |
Pay What You Want
|
A set of two 3D model file representing the Union river ironclad Ozark. One is scaled at 1/1200 and is a one piece model, the other scaled at 1/600 with a separate turret. ... [click here for more] |
Long Face Games |
$4.85
|
A 3D model file representing a stern wheel snag boat, typical of those seen on the Mississippi and other rivers. Their purpose was to clear floating obstructions, tree trunks and other “snags”. They could be found in support of naval forces throughout the civil war . The model file is scaled for 1/600 – set the scale to 50% in your slicing software for 1/1200 ... [click here for more] |
Long Face Games |
$4.85
|
A set of 3D model files representing the US Navy screw steamer USS Varuna. Files are provided for 1/1200 and 1/600 models. ... [click here for more] |
Long Face Games |
$4.85
|
A set of two 3D model files representing the four ships of the US Navy’s “Milwaukee” class of river monitors. Models are presented either as a one piece print suitable for 1/1200, or with separate turrets for 1/600 ... [click here for more] |
Long Face Games |
$4.85
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 3 sheets includes 83 counters. ... [click here for more] |
David Brandon |
$3.45
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 3 sheets includes 143 counters. ... [click here for more] |
David Brandon |
$3.45
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 3 sheets includes 113 counters. ... [click here for more] |
David Brandon |
$3.45
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$1.95
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 5 sheets includes 173 counters. ... [click here for more] |
David Brandon |
$5.65
|
A set of five 3D model file representing generic Confederate riverboat rams and gunboats, based on the types operated around \Memphis in 1862. The STL files are scaled for printing in 1/600. Set scale to 50% in your slicer to print at 1/1200 ... [click here for more] |
Long Face Games |
$7.27
|
47 page PDF or EPUB file. Articles include:
Terrain Makes the Game Easier
Building Antietam
Making low cost, durable fields for your ACW gaming table
The Road (More or) Less Traveled
Terrain Tip: Cinnamon Broom
How to Make American Civil War Earthworks
Flexible Fields
Easy Cardstock... [click here for more] |
Raven Banner Games |
$3.50
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 4 sheets includes 175 counters. ... [click here for more] |
David Brandon |
$3.45
|
Iron & Steam is a set of miniatures rules for naval combat of the American Civil War. The rules feature a gun-by-gun combat resolution, written orders and simultaneous movement. Traditionally played with 1/600 scale models the combat scale is closer to 1/2400 scale, though the game is generally model scale agnostic. Also included are over 100 pre-filled ship record sheets, turning radii... [click here for more] |
Autodidact-O-Saurus |
Pay What You Want
|
A set of 3D model files representing the Union monitors of the Canonicus Class. Files are provided for 1/1200 (one piece) and 1/600 (separate hull and turret) models. There are two turret variants in each scale, one as designed, the other with a “bullet shield” added to the top of the turret. ... [click here for more] |
Long Face Games |
$4.85
|
A set of 3D files representing a Union mortar raft, and a Mississippi flatboat, often used to transport cargo downriver (3 variants provided) STL files is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$3.64
|
ACW Gamer: The Ezine Issue 1:
An electronic magazine for fighting the American Civil War on your table top! Miniatures, Scenarios, Reviews and more!
A skirmish level scenario for Pohick Church, 1861
An interview with Chris Hughes, owner/sculptor of Sash and Saber Castings
A unit sketch of the 83rd Pennsylvania Volunteer Infantry
Crucible of Valor: an unofficial ACW variant for Warlord Games'... [click here for more] |
Raven Banner Games |
$3.50
|
A set of 3D model files representing the Union ram “Monarch” which served in Ellet’s United States Ram Fleet. Two models are included which reflect differing descriptions and illustrations in period documents. The files are scaled for 1/600 – set the scale to 50% in your slicing software for 1/1200 ... [click here for more] |
Long Face Games |
$4.85
|
A 3D model file representing the Union ram “Switzerland”, which served in Ellet’s United States Ram Fleet. The model file is scaled for 1/600 – set the scale to 50% in your slicing software for 1/1200 ... [click here for more] |
Long Face Games |
$4.85
|
A set of two 3D model file representing the riverboat Planter, originally serving the Confederates but taken over by Robert Smalls who became the first black captain of a US Navy vessel. One model has plain sides, the other has the ships name embossed on the paddle box. A third model presents a generic riverboat of similar design. The STL files are scaled for printing in 1/600. Set scale to 50% in... [click here for more] |
Long Face Games |
$4.85
|
NAVAL WARGAMES RULES FOR THE IRONCLAD PERIOD, 1850-1880
Listing updated 31 March 2019
· Current Edition 3.0a (PDF) 3.0 (POD)
· Recommended scale 1/1200 or 1/2400
· Complexity: 6/10
· Level of detail: 6/10
· Dice required: D20, D10, D6
A SET OF QUICK REFERENCE SHEETS IS AVAILABLE THROUGH THE PUBLISHER'S... [click here for more] |
A and A Games |
$14.54
|
Log In 
