| Title |
Publisher |
Price |
A 3D model file representing the Confederate casemate ironclad CSS Arkansas. One of the most famous ships of the war, Arkansas fought the Union warships Carondelet, Queen of the West and Tyler, ran past the Union fleet at Vicksburg and fought at Baton Rouge before being scuttled by her crew in August 1862. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.82
|
A 3D model file representing the Confederate casemate ironclad CSS Charleston. She served as the flagship of the Charleston squadron until she was destroyed to prevent capture in 1865. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.82
|
A 3D model file representing the Confederate casemate ironclad CSS Chicora. She served as part of the Charleston squadron until she was destroyed to prevent capture in 1865. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.82
|
A 3D model file representing the Confederate casemate ironclad CSS Palmetto State. She served as part of the Charleston squadron until she was destroyed to prevent capture in 1865. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.82
|
A set of STL files representing the Confederate gunboat CSS Sampson. She served at Savannah Georgia and served a the battle of Port Royal in November 1861. The model is supplied in two variants, one armed as she was in Confederate service, the other unarmed to represent a typical steam tug. The models are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the Confederate gunboat CSS Grampus. She served on the Mississippi river and served at the defence of Island No. 10, where she was burned to avoid capture on 7th April 1862. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
3D Print Ancient galleys for naval wargames. 1/600 scale. This set contains:
- 2 biremes types
- 3 triremes types
- 1 quinquireme
- 1 merchant boat (Roman) ... [click here for more] |
Voxelhouse |
$5.99
|
A set of 3D model files representing the seven ships of the Union’s “City” class of casemate ironclads, of which the Cairo was the first. The ships of the class fought on the Mississippi, two of the ships, Cairo and Baron de Kalb, were sunk by mines on the Yazoo River. Six models are included covering the standard design (USS Cairo) and two variants, USS Mound City, and USS Cincinnati. Each ... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the Confederate casemate ironclad CSS Tennessee. She was built to defend the port of Mobile and was the flagship of the squadron based there. She fought at the Battle of Mobile Bay in August 1864. She was captured and later served as the USS |Tennessee in the Mississippi. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the Confederate gunboat ram General Sumpter. She operated on the Mississippi and was part of the force that crippled the ironclad Cincinnati at the battle of Plum Point in May 1862. She was captured by the Union in August that year but was used for spare parts and eventually burned and scrapped shortly thereafter. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
A set of STL files representing Confederate floating gun batteries in three variants. The model is based on the well-known battery at Charleston with overhead protection Two lesser protected variants are also included. The models are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
An STL files representing a generic Union hospital ship. A number of such vessels operated with the Union riverine fleets, providing essential care for sailors and soldier wounded in combat. The model is scaled to 1/600 and prints well at 1/1200
. ... [click here for more] |
Long Face Games |
$3.82
|
A set of STL file representing the US Navy’s Landing Craft Support (LCS), based on the LCI(L) hull but significantly upgunned. The LCS was tasked with providing close fire support for amphibious landings, but was also called upon to provide escorts for convoys, conducting special operations and other missions. Two variants are included. The models are scaled at 1/600, but can be easily rescaled... [click here for more] |
Long Face Games |
$3.82
|
A 3D model file representing the Union steam sloop of war USS Hartford. One of the most famous ships of the Civil War, Hartford as Farragut’s flagship on the Mississippi and fought at New Orleans, Vicksburg and Mobile Bay The model is scaled to 1/600, and prints well at 1/1200 on a resin printer ... [click here for more] |
Long Face Games |
$3.82
|
A set of STL files representing the many types of schooners that were used by both sides in the Civil War (and which are of use for other theatres of war as well. Three variants are included, one armed, one unarmed and one carrying a heavy mortar, typical of those used on the Mississippi. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the Union river gunboat Queen City. She was taken into service in 1863 and patrolled the Mississippi and Tennessee rivers In June 1864 the ship was surprised by a force of Confederate cavalry and artillery, leading to her capture. The Confederates burned and blew up the ship when the USS Tyler mounted a rescue attempt. The model is scaled to 1/600 and print well at 1/1200... [click here for more] |
Long Face Games |
$3.82
|
A set of STL files representing the following craft and supporting units
Austrian
Steamer Hess
Steamer Franz Josef
Wildfang Class Gunboat
“Venice” gunboat
Italian
Steamer Benaco
Steam gunboat class
Artillery Barge
Generic
Merchant Steamer
Pleasure Steamer
Shore batteries (2, 3 and 4 guns)
The models are scaled to 1/300 and print... [click here for more] |
Long Face Games |
$25.49
|
An STL file representing the Confederate gunboat ram “General Stirling Price” She operated on the Mississippi and was sunk by the Union ram “Queen of the West”. She was later raised and taken into Union service as the USS General Price. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
A set of three STLs scaled to 1/600 covering some of the more popular torpedo craft of thr Civil War. The models included are the Union picket boat (Picket Boat No. 1 being notable as the craft used by Cushing to sink the Albemarle), and the Confederate "David" and "Squib" class vessels. The models are intended for printing at 1/600 but may work well in 1/1200 with resin printers. ... [click here for more] |
Long Face Games |
Pay What You Want
|
A 3D model file representing the Union river ironclad USS Benton. She was a converted snag boat and served on the Mississippi as a flagship. The STL files are scaled to 1/600, and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the Confederate armed tug CS Neptune. She joined the gunboat CS Bayou City in attacking the Union squadron at Galveston but was sunk. Three variants are included, one unarmed, one with deck guns and the third with guns and with cotton bale “armour”. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the Confederate gunboat “General Bragg” She operated on the Mississippi and helped to sink the Union ironclad “Cincinnati”. She was captured near Memphis and taken into Union service as the USS Bragg. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the US Navy's Landing Craft Infantry (Large), or LCI(L), in this case the “round con, side ramp” variant. The model is scaled at 1/600, but can be easily rescaled to 1/300 or 1/700 in your slicer software. ... [click here for more] |
Long Face Games |
$3.82
|
Three 3D model files representing generic blockade runners of the American Civil War. |Two is in original Confederate configuration, the third is armed to represent a vessel captured by the Union and pressed into service as a gunboat. The STL files are scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the revenue cutter Harriet Lane. She served initially with the Union Navy but was captured by the CS Bayou City during the Union attack on Galveston, serving with the Confederate fleet thereafter. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
A range of aige of sail ships , there is a single zip file containing all the models in the collection ... [click here for more] |
Twylite Games |
$20.33 $15.24
|
A set of STL files representing the Union river ironclad USS Choctaw. One of the most distictive ironclad warships on the Mississippi along with her “cousin”, the Lafayette., she served from 1862 until the end of the Civil War. Two versions are included, one with masts, the other without. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
A 3D model file representing the Confederate cottonclad ram CSS General Earl Van Dorn, which served in the River Defense Fleet on the Mississippi. The Van Dorn fought at Fort Pillow and was the only surviving Confederate ram at the Battle of Memphis. . The model is scaled at 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
A 3D model file representing the ubiquitous Union “90 day gunboats”, 23 of which were built and served across the Union blockading squadrons and on the Mississippi.. The STL file is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
A 3D model file representing the Union frigate USS Mississippi. She served with Farragut’s fleet on the Mississippi, at New Orleans where she defeated the ironclad Manassas, and was finally destroyed at the battle of Port Hudson. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer ... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the Confederate casemate ironclad Savannah. She was one of the “Richmond” class of near-sisters and was built in the city whose name she bore. was finally scrapped .She was commissioned in Summer 1863 and was burnt in December the following year to avoid capture by Sherman’s army. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
A set of 3D model STL files representing the Union casemate ironclad Essex, which served on the Mississippi. Three variants are supplied, showing her armament configurations in 1861, 1862 and 1865. In addition, each variant is supplied with solid guns or hollowed out guns suitable for SLA printing. The models are scaled at 1/600, and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
a collection of 3mm units for the 30 yrs war units included , I have also added a selection of half depth formations to make the units more interesting
30yw extra . zip
Shot only , Shot only large
Irregular infantry , Irregular infantry large
Early tercio , Early tercio large
winged hussars , winged hussars large
ECW infantry , ECW infantry large
Dutch infantry , dutch infantry large
30yw... [click here for more] |
Twylite Games |
$12.74 $9.56
|
An STL file representing the Confederate gunboat CSS Livingston. She was a ferryboat converted at Columbus, Kentucky in 1862. She had a short career, working on the Mississippi and Yazoo rivers. She was burnt later in 1862 to avoid capture. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the Confederate casemate ironclad CSS Missouri. She was built at Shreveport and launched in 1863. She was underpowered and difficult to manoeuvre, so she was seldom used operationally. She was the last Confederate ironclad to surrender to Union forces in 1865.The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
A set of 3D model STL files representing the New York ferry “Hunchback” as she was in service with the Union Navy. The model is also representative of other ferry gunboats. Three models are included, representing her armament as initially converted, in 1863 and 1865, A fourth model has no armament fitted for those who prefer to add their own guns. The models are scaled at 1/600, and print well... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the Danish casemate ironclad HDMS Odin. She was laid down in 1871 and completed in 1874, serving until 1912. The model is scaled to 1/600 and prints well at 1/1200
. ... [click here for more] |
Long Face Games |
$3.82
|
enclosed herein is a collection of STLs. you will find representatives of the British Captial ship classes: Queen Elizabeth Class, Revenge Class, King George V class, and Nelson Class. the British Battlecruisers: Renown class and the one-off HMS Hood. all 6 of which could be found for free on my Thingiverse page. exclusive to this package however you will find STLs for the Tribal class destroyer, County... [click here for more] |
Badger with a quill |
Pay What You Want
|
A3D model file representing the Union sidewheel paddle steamer USS Black Hawk. She served as the flagship of Rear Admiral David Porter and succeeding commanders of the Union forces on the Mississippi. The model is scaled to 1/600 and prints well at 1/1200. ... [click here for more] |
Long Face Games |
$3.82
|
A 3D model file representing the Union sloop USS Housatonic. One of a class of four ships, she was the first ship to be attacked and sunk in action by a submarine when she was sunk by a spar torpedo from the Hunley. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer ... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the Confederate gunboat “Isondiga”. The ship operated in waters around Savannah. She accompanied the CSS Atlanta at the battle of Wassaw Sound on 17th June 1863. She is typical of a number of gunboats constructed or converted in Confederate ports. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$2.55 $1.91
|
A 3D model STL file representing the Union’s “Sassacus” class of double ended gunboats. A class of 28 vessels, the Sassacus class ships were involved in many riverine operations on the Mississippi and James rivers, and with the blockading squadrons at sea. The model is scaled at 1/600, and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
A set of three STL files representing the ships of the Albemarle class of casemate ironclads.. Albemarle and Neuse were completed and saw action, Albemarle being sunk by spar torpedo. Pamlico was a projected third vessel of the class which was never completed. Files are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
A 3D model STL file of the Union casemate river ironclad Lafayette. The ship was one of the largest Union riverine warships to serve on the Mississippi and\ saw constant action from early 1863 until the end of the war. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
An STL file representing the Union gunboat Sachem. She was present at the battle of New Orleans, in the attack on Galveston, and later with Porter’s fleet at the siege of Vicksburg. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
The Union States Navy river gunboat USS Tyler and Conestoga modelled as a set of three stl files for 3-D printing. The first represents the ship as built, the second with her subsequent upgunning whilst the third adds detail such as boats and awning rails. The models are scaled for 1/600 printing, but can be rescaled and printed at 1/1200 ... [click here for more] |
Long Face Games |
$7.65
|
An STL file representing the Danish turret ship, Rolf Krake. She was built in Scotland in 1863 and was equipped with two turrets designed by Captain Cowper Coles. She fought in the Second Schleswig War of 1864. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
This is a supplement for Sharp Practice 2 and Kiss Me Hardy using the To Covet Glory modifications.
What is it? The scenario book has a historical overview of the War of Jenkin's Ear as it pertains to the actions in the British Colony of Georgia. It has addditional rule modifications to use with To Covet Glory. It has some rule changes for Sharp Practice... [click here for more] |
Chris Stoesen |
$15.00
|
A 3D model file of the Confederate casemate ironclad Louisiana, built at New Orleans to defend the Mississippi river. Three variants are included; her initial configuration, the ship as armed at the battle of April 24th 1862, and a third with her full armament. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$5.10 $3.82
|
An STL files representing the four ships of the French “Cerbere” class of ironclad rams. They were built in the mid 1860s and were designed to provide protection to the French ports of Brest, Cherbourg, Rochefort and Lorient The models are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$3.82
|
Log In 
