| Title |
Publisher |
Price |
A 3D model file of a generic steam frigate, typical of those used by many seafaring nations in the 1860s and 1870s.
The model is scaled to 1/600, and prints well at 1/1200 on a resin printer ... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the Confederate battery CSS New Orleans. Originally a floating drydock, she was converted into a battery in 1861, featuring iron sheathing and armed with multiple guns. However, she lacked her own propulsion and relied on other vessels for movement. Commissioned on October 14, 1861, she was deployed to defend Confederate positions along the Mississippi River, including... [click here for more] |
Long Face Games |
$4.02
|
We are releasing an exclusive set of STL files for SLA 3D printers featuring futuristic Navy units. These are ships designed to carry large futuristic combat units at a 1/300 scale. Specially developed for your wargaming tables. This set contains:
- Transport hovercraft
- Stealth ship
- Atomic Submarine ... [click here for more] |
Voxelhouse |
$3.99
|
A 3D model file representing the Union tinclad sternwheel gunboat, USS Rattler. She served with Admiral Porter’s Mississippi Squadron and was engaged in several actions, including the attack on Fort Hindeman in January 1863. She was lost in a gale in December 1864. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the Confederate gunboat CSS Little Rebel. She served as the flagship of the Confederate River Defence Fleet. After participating in key battles like Plum Point Bend and Memphis, she was captured by Union forces, repaired, and served as USS Little Rebel until the end of the Civil War.. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the Confederate casemate ironclad CSS Virginia. Built upon the hull of the USS Merrimack, she was the first Confederate ironclad warship and fought against the USS Monitor at Hampton Roads in the first naval battle between ironclad warships. Two variants are included, one as shown and one with the boa area planked in. The model is scaled to 1/600, and prints well at 1/1200... [click here for more] |
Long Face Games |
$4.02
|
We are releasing an exclusive set of STL files for SLA 3D printers featuring futuristic transport units. These are ships designed to carry large futuristic combat units at a 1/300 scale. Specially developed for your wargaming tables.
*Ogres not included, shown only for scale reference. ... [click here for more] |
Voxelhouse |
$3.49
|
A 3D model file representing the Confederate casemate ironclad CSS Arkansas. One of the most famous ships of the war, Arkansas fought the Union warships Carondelet, Queen of the West and Tyler, ran past the Union fleet at Vicksburg and fought at Baton Rouge before being scuttled by her crew in August 1862. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.02
|
3D Print Ancient galleys for naval wargames. 1/600 scale. This set contains:
- 2 biremes types
- 3 triremes types
- 1 quinquireme
- 1 merchant boat (Roman) ... [click here for more] |
Voxelhouse |
$5.99
|
A 3D model file representing the Confederate floating battery CSS Memphis. She was converted from a floating dock and is likely to have participated in the defence of New Orleans when the city was attacked and taken by Admiral Farragut’s fleet in 1862. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.02
|
A set of 3D model files representing the seven ships of the Union’s “City” class of casemate ironclads, of which the Cairo was the first. The ships of the class fought on the Mississippi, two of the ships, Cairo and Baron de Kalb, were sunk by mines on the Yazoo River. Six models are included covering the standard design (USS Cairo) and two variants, USS Mound City, and USS Cincinnati. Each ... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the Confederate casemate ironclad CSS Montgomery. She was one of three large ironclads built at Montgomery, Alabama. Construction was started in late 1862. She was launched the following year but was never completed. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the Confederate ironclad CSS Wilmington. She was designed by John L Porter and built at the city whose name she bore. She was 90% complete when Wilmington fell to Union forces. Her role, if completed, would have been to engage unarmoured vessels of the Union blockading squadron, maintaining access for blockade runners to reach safe harbour. The model is scaled to... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the Confederate ironclad CSS Muscogee. Construction began in late 1862 at the Columbus Navy Yard in Columbus, Georgia. Originally designed as a sternwheel-powered ironclad, the ship proved too heavy to launch on its first attempt in January 1864. This model represents the ship as originally designed (LFG’s CSS Jackson, LFG3D112 represents the redesigned ship). Two versions... [click here for more] |
Long Face Games |
$4.02
|
An STL file representing the Confederate casemate ironclad CSS Tennessee. She was built to defend the port of Mobile and was the flagship of the squadron based there. She fought at the Battle of Mobile Bay in August 1864. She was captured and later served as the USS |Tennessee in the Mississippi. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the Union steam sloop of war USS Hartford. One of the most famous ships of the Civil War, Hartford as Farragut’s flagship on the Mississippi and fought at New Orleans, Vicksburg and Mobile Bay The model is scaled to 1/600, and prints well at 1/1200 on a resin printer ... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the Union casemate ironclad USS Eastport. She was captured in an incomplete state from the Confederates in mid 1862 and entered US service in October of that year. She operated on the Mississippi until April 1864 when she struck a mine. Attempts to salvage her failed and she was blown up to avoid capture. The model is scaled to 1/600, and prints well at 1/1200 on a resin... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the Confederate casemate ironclad CSS Milledgeville. She was built at Savannah, Georgia. Construction was started in 1863. By December 1864 she was near completion but was threatened by Union troops so she was burnt on the 21st to avoid capture. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the Soviet WW2 gunboat Amethyst. She was originally the WW1 German destroyer A32. Sunk during Operation Albion in 1917 she was salvaged and became the Estonian Sulev, and hem seized by the Russians in 1940 when she became the Amethyst. The model is scaled to 1/600 and prints well at 1/300. ... [click here for more] |
Long Face Games |
$4.02
|
This STL pack contains the files for 6 Valtoris ships plus fighters as a starter fleet for use in your games of Ironclads of Ferrosia, they can of course be used in other similar game systems.
Files included...
Valtoris Battleship Valtoris Carrier Valtoris Cruiser Valtoris Destroyer Valtoris Frigate Valtoris Submersible Valtoris Submersible (submersed) Valtoris Fighter Stand ... [click here for more] |
Mac |
$4.00
|
This STL pack contains the files for 6 Zephyros ships plus fighters as a starter fleet for use in your games of Ironclads of Ferrosia, they can of course be used in other similar game systems.
Files included...
Zephyros Battleship Zephyros Carrier Zephyros Cruiser Zephyros Destroyer Zephyros Frigate Zephyros Submersible Zephyros Submersible (submersed) Zephyros Fighter Stand ... [click here for more] |
Mac |
$4.00
|
A set of three STLs scaled to 1/600 covering some of the more popular torpedo craft of thr Civil War. The models included are the Union picket boat (Picket Boat No. 1 being notable as the craft used by Cushing to sink the Albemarle), and the Confederate "David" and "Squib" class vessels. The models are intended for printing at 1/600 but may work well in 1/1200 with resin printers. ... [click here for more] |
Long Face Games |
Pay What You Want
|
A 3D model file representing the Union sloop of war, USS Pawnee. She was commissioned in 1860 and served with the Atlantic Blockading Squadron in 1862. Her most conspicuous action was participation in the abortive assault on Port Royal in October of that year. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the Confederate casemate ironclad CSS Charleston. She served as the flagship of the Charleston squadron until she was destroyed to prevent capture in 1865. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the Union river ironclad USS Benton. She was a converted snag boat and served on the Mississippi as a flagship. The STL files are scaled to 1/600, and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.02
|
Includes 19 STL scenery miniatures for DeepWars underwater battles in Darkstar Rift. These scenic models can work well for land-based games as well.
2 Giant Anemones
4 Crystal Outcroppings
2 Ethereal Gateway Devices
1 Kelp Forest section with four kelp stalks
2 Giant Ethereal Spores
2 Ethereal Rift Eruption Tentacles
1 Ancient Obelisk
1 Sunken Temple Ruins
1 Ruined Dome
3 Sunken Statues
STL files... [click here for more] |
AntiMatter Games |
$39.99
|
Three 3D model files representing generic blockade runners of the American Civil War. |Two is in original Confederate configuration, the third is armed to represent a vessel captured by the Union and pressed into service as a gunboat. The STL files are scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$5.36 $4.02
|
A set of STL files representing the Confederate gunboat CSS Sampson. She served at Savannah Georgia and served a the battle of Port Royal in November 1861. The model is supplied in two variants, one armed as she was in Confederate service, the other unarmed to represent a typical steam tug. The models are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.02
|
A range of aige of sail ships , there is a single zip file containing all the models in the collection ... [click here for more] |
Twylite Games |
$22.32 $16.82
|
Includes four STL miniatures for a 400 point DeepWars Warband, ready for underwater battles. The Ancients of Atalan are the remnant of an elder race of Atlanteans, searching for their lost technology to help rebuild their civilization.
Mictal Stonewalker – Captain of Atalán
Ether Sorceress
Sniper Solider
Makiraform Mech Construct
Each miniature includes a scenic base and comes with pre-supported... [click here for more] |
AntiMatter Games |
$12.99
|
A set of STL files representing the many types of schooners that were used by both sides in the Civil War (and which are of use for other theatres of war as well. Three variants are included, one armed, one unarmed and one carrying a heavy mortar, typical of those used on the Mississippi. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the Confederate casemate ironclad CSS Palmetto State. She served as part of the Charleston squadron until she was destroyed to prevent capture in 1865. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.02
|
An STL file representing the Confederate gunboat ram General Sumpter. She operated on the Mississippi and was part of the force that crippled the ironclad Cincinnati at the battle of Plum Point in May 1862. She was captured by the Union in August that year but was used for spare parts and eventually burned and scrapped shortly thereafter. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.02
|
A 3D model file representing the ubiquitous Union “90 day gunboats”, 23 of which were built and served across the Union blockading squadrons and on the Mississippi.. The STL file is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$4.02
|
DeepWars – Darkstar Rift is a two-player introduction to the DeepWars miniatures game. Fortune Hunters in dive suits and Nereid merfolk with warbeasts battle in the deadly waters of an underground ocean known as the Shadow Sea, searching for the lost treasures of Darkstar Rift. Battles take place in a deadly underwater forest, amid sunken ruins, within a volcanic rift zone, and finally in an... [click here for more] |
AntiMatter Games |
$49.99
|
Kraken Reef is a two-player introduction to the DeepWars miniatures game. Two players battle in the deadly waters of an underground ocean known as the Shadow Sea, searching for the ruins of a research station to find ancient technology.
Games are played using models representing adventurers, bio-mechanical constructs, wild sea creatures and vehicles. In this Deluxe Digital version, you... [click here for more] |
AntiMatter Games |
$29.99
|
A 3D model file representing the Confederate cottonclad ram CSS General Earl Van Dorn, which served in the River Defense Fleet on the Mississippi. The Van Dorn fought at Fort Pillow and was the only surviving Confederate ram at the Battle of Memphis. . The model is scaled at 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.02
|
A set of STL files representing Confederate floating gun batteries in three variants. The model is based on the well-known battery at Charleston with overhead protection Two lesser protected variants are also included. The models are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.02
|
enclosed herein is a collection of STLs. you will find representatives of the British Captial ship classes: Queen Elizabeth Class, Revenge Class, King George V class, and Nelson Class. the British Battlecruisers: Renown class and the one-off HMS Hood. all 6 of which could be found for free on my Thingiverse page. exclusive to this package however you will find STLs for the Tribal class destroyer, County... [click here for more] |
Badger with a quill |
Pay What You Want
|
A set of STL file representing the US Navy’s Landing Craft Support (LCS), based on the LCI(L) hull but significantly upgunned. The LCS was tasked with providing close fire support for amphibious landings, but was also called upon to provide escorts for convoys, conducting special operations and other missions. Two variants are included. The models are scaled at 1/600, but can be easily rescaled... [click here for more] |
Long Face Games |
$4.02
|
a collection of 3mm units for the 30 yrs war units included , I have also added a selection of half depth formations to make the units more interesting
30yw extra . zip
Shot only , Shot only large
Irregular infantry , Irregular infantry large
Early tercio , Early tercio large
winged hussars , winged hussars large
ECW infantry , ECW infantry large
Dutch infantry , dutch infantry large
30yw... [click here for more] |
Twylite Games |
$13.39
|
A set of 3D model files representing the Union ironclad “Monitor”, the first warship to engage an enemy using its armament in a turret, and one of the first trio of union ironclads along with New Ironsides and Galena. The model is scaled to 1/600 and prints well at 1/1200. Two versions are included, with and without the sloped armour protecting the pilot house. ... [click here for more] |
Long Face Games |
$2.68
|
A set of 3D model STL files representing the Union casemate ironclad Essex, which served on the Mississippi. Three variants are supplied, showing her armament configurations in 1861, 1862 and 1865. In addition, each variant is supplied with solid guns or hollowed out guns suitable for SLA printing. The models are scaled at 1/600, and print well at 1/1200 ... [click here for more] |
Long Face Games |
$5.36
|
An STL file representing the Confederate gunboat ram “General Stirling Price” She operated on the Mississippi and was sunk by the Union ram “Queen of the West”. She was later raised and taken into Union service as the USS General Price. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.02
|
The Union States Navy river gunboat USS Tyler and Conestoga modelled as a set of three stl files for 3-D printing. The first represents the ship as built, the second with her subsequent upgunning whilst the third adds detail such as boats and awning rails. The models are scaled for 1/600 printing, but can be rescaled and printed at 1/1200 ... [click here for more] |
Long Face Games |
$5.36
|
A set of 3D model file representing the river gunboat “Queen of the West”. Two models represent the ship in her civilian guise, one unloaded, the second with a deck load of cotton bales. The third includes the forward casemate added when she was converted to a gunboat in US and then Confederate service. The STL files are scaled for printing in 1/600. Set scale to 50% in your slicer to print... [click here for more] |
Long Face Games |
$5.36
|
This is a supplement for Sharp Practice 2 and Kiss Me Hardy using the To Covet Glory modifications.
What is it? The scenario book has a historical overview of the War of Jenkin's Ear as it pertains to the actions in the British Colony of Georgia. It has addditional rule modifications to use with To Covet Glory. It has some rule changes for Sharp Practice... [click here for more] |
Chris Stoesen |
$15.00
|
STL files of each a 9pd and a 32pd naval cannon. The files came in both, as complete assembly and split in carrier and barrel . The geometry is adapted to FDL and scale, so some small detailles are a bit more massive than in reality.
it contents STL-Files, made for 3D printing, to be used for table-top-gaming in scal 1:72 (25mm), but can be used, if scaled by printer, between 1:32 to 1:700. ... [click here for more] |
Xerbath |
$3.90
|
A set of 3D model STL files representing the New York ferry “Hunchback” as she was in service with the Union Navy. The model is also representative of other ferry gunboats. Three models are included, representing her armament as initially converted, in 1863 and 1865, A fourth model has no armament fitted for those who prefer to add their own guns. The models are scaled at 1/600, and print well... [click here for more] |
Long Face Games |
$5.36
|
A set of STL files representing the following craft and supporting units
Austrian
Steamer Hess
Steamer Franz Josef
Wildfang Class Gunboat
“Venice” gunboat
Italian
Steamer Benaco
Steam gunboat class
Artillery Barge
Generic
Merchant Steamer
Pleasure Steamer
Shore batteries (2, 3 and 4 guns)
The models are scaled to 1/300 and print... [click here for more] |
Long Face Games |
$26.79
|
Log In 
