| Title |
Publisher |
Price |
These are optional cards for use with Deth Wizards. Included are 19 Necromantic Minion cards, seven Hero cards, three Lair cards, and 14 Lair Impedimenta cards.
Deth Wizards is miniatures-agnostic tabletop wargame where you are a Necromancer commanding an undead horde to fight against the heroes and villagers in the land of Deth.
Designed to play solo, co-op,... [click here for more] |
Snarling Badger Studios |
$10.00
|
Sat inside the cockpit with the engine rattling through your bones, you turn to engage. Managing your energy and fuel, can you gain position to get a shot off? Or will the bandit get the better of you? Sometimes it is better to disengage than push a losing fight.
Violent Skies is a solitaire game of aerial combat in the Second World War. Using a game card that acts as your... [click here for more] |
Pocket Warfare Publishing |
$9.50
|
scratch builder monthly is the official magazine of mj hobby corner, documenting 3 years of scratch building for games. Projects vary greatly in scope and complexity but all share the use of recycled materials and the lowest budget possible.
This year the magazine will begin focusing on figure construction and less on terrain. While terrain construction will not cease completely, only unique aspects... [click here for more] |
MJ hobby corner |
$3.00
|
Fields of Blood is an expansion to CLASH of Spears
This expansion currently includes:
Rules for designing solo scenarios and two ready to play solo scenarios
Rules for fighting assaults on fortifications
Rules for figthing engagements in urban areas
Two new scenarios including an assault scenario
Alternative quick deployment rules
Rules for large and multiplayer games
New rules to add speacial... [click here for more] |
Fighting Hedgehog |
$11.00
|
Tactical AI for skirmish miniature wargames.
Hostile Tactical AI is an Artificial Intelligence system to order enemy units around in skirmish miniature wargames, so you may play solo or co-op against the enemy. The rules work through a deck of 72 cards that tell enemy units, where to go and what to do. There are two sets of instructions on every card. One set gives orders to patrolling units unaware... [click here for more] |
SixJAM |
$9.99
|
This is the latest version of COA’s well-received Fighting Wings (FW) WW-II air combat series game rules, as released in Wings of the Motherland. This edition incorporates 15 years of minor improvements from second edition rules play, all the second edition errata and also introduces some major revisions to certain aspects of play for increased modeling accuracy and ease of play. Sections... [click here for more] |
Clash of Arms Games |
$12.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. It may look complicated, but every part of the Country Brewery is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the... [click here for more] |
Dave Graffam Models |
$6.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model set is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$1.95
|
Glutter of Ravens was first published in 1998 and became known as an essential guide to wargaming the Arthurian period. This 2024 "Author's Edition" is a reproduction of the original text but features a new layout, additional notes, and the author’s new preface. Part One contains a set of miniature wargaming rules designed to recreate and play battles in post-Roman Britain. These rules allow players... [click here for more] |
Daniel's Games Emporium |
$12.94
|
COLD WAR3! Rules for Modern Warfare 1960-1990
Fully revised 4th Edition of COLD WAR3! infact, so revised and shiny and new it's a completley NEW book!
Includes rules for combined arms using artillery, armour, mechanised, aircraft and support troops (such as engineers and medical personnel). Rules for the electronic battlefield, nuclear, biological & chemical... [click here for more] |
Rooksdown Games |
$51.33 $13.28
|
5th Edition Standard Rules for Les Bataille dans l'age l'Empereur Napoleon 1er tactical Napoleonic period games. This rule book comes with La Bataille de Ligny Second Edition game. ... [click here for more] |
Clash of Arms Games |
$6.00
|
February 2025 issue of scratch builder demonstrates how I build my 6mm canvas mesh armies, using a starter approach. This issue also dicusses a very low budget upgrade to a collection of tree monsters from 2022 editions. I go over the procedure for adding a bark like texture and painting. In addition, we discuss making little myconid warriors out of the simplest of materials. RPG corner and game news... [click here for more] |
MJ hobby corner |
$3.00
|
Scratch builder monthly is mj hobby corner's magazine describing very low budget terrain and model building for wargames or RPG. Projects are presented with a variety of photos and project descriptions, tools used and game examples.
This month we explore star ship construction and lay the ground work for some future bio-army ideas. All designs are very subjective, however, focus is given to the technique... [click here for more] |
MJ hobby corner |
$3.00
|
Welcome to the final issue of the yearly magazine scratch builder monthly. Join the author in a variety of creative projects for war gaming, or RPG. Whether you are a seasoned crafter or just starting out, scratch builder has somethign for everyone.
This issue we explore the creation of a spider walker with nothing but a small box, some canva mesh and lots of imagination. Most crafting is done with... [click here for more] |
MJ hobby corner |
$3.00
|
This large printable map is a beautiful surface for building the seedy side of a medieval town, Victorian neighborhood or steampunk metropolis. It's easy to print in one piece at your local shop, or in sections on your desktop printer. An optional 1-inch grid is included, and this map is tileable in the sense that you can choose any edge of the map and it will "wrap" around to the opposite side.... [click here for more] |
Dave Graffam Models |
$4.95
|
First issue of 2025!
scratch builder is a monthly publication that includes tutorials on scratch built models/ terrain and other gaming accessories. All projects use a host of recycled materials and vary in complexity. Also includes gaming news from MJ hobby corner's studio. ... [click here for more] |
MJ hobby corner |
$3.00
|
Easy to build: This paper model kit is easy to assemble, requiring just 4 to 5 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm... [click here for more] |
Dave Graffam Models |
$2.95
|
Wargame army units based on the standard frontage of 40mm (DBX). showing generic mannaquin figures for over 50 different unit types to cover the period 3000 BC to 1450 AD.
In addition the set includes counters for camps and villages, and terrain sheets which can be mounted and cut to the sizes required by the player's rules for woods, rough, fields, hills Etc.
Counters will never replace the... [click here for more] |
Geoff Curran |
$17.13 $12.64
|
This large printable map features cobbled roads in an irregular pattern inspired by real cities. The details are sharp, and it's designed to be the perfect complement to my collection of paper models, giving you a beautiful surface for building your own bustling town or ruined village. It's easy to print in one piece at your local shop, or in sections on your desktop printer. An optional 1-inch grid... [click here for more] |
Dave Graffam Models |
$4.95
|
The Fear God & Dread Nought, 2nd edition Player’s Handbook is a collection of the charts and tables that appear in the FG&DN 2nd edition rules. Designed for quick reference, it provides all the charts and tables needed for fast game play. Only rules-related charts and tables are included here. The Data Annexes are provided in the scenario booklets and data annexes.
This... [click here for more] |
Admiralty Trilogy Group |
$2.50
|
This package has 4 sheets of unit counters, 6 geomorphic maps and 4 scenarios for print and play with Panzer Leader/AIW game system. All units are color-coded by battalions/regiment for easy reference.
... [click here for more] |
Homeland Workshop |
$20.00 $15.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Optionally, you may also use foamcore.
15mm to 30mm scale: This paper terrain is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm,... [click here for more] |
Dave Graffam Models |
Pay What You Want
|
This product supports the Dawn of the Battleship (DoB) supplement In Mahan’s Wake, which provides 31 scenarios set in the pre-dreadnought period (1890 – 1904). A Form 10 lists all the statistics for the ship, along with weapon ranges and hit chances, maneuvering data, and a damage tracking form - all the information needed to use that ship in a DoB game.
Consisting... [click here for more] |
Admiralty Trilogy Group |
$18.00
|
Welcome to Malifaux! If you're just getting into this Wild West/Gothic horror/Victorian/Steampunk skirmish-scale miniature warfare game, you may be a little overwhelmed at how to start. One of the challenges is knowing which Markers and Tokens to have ready for your models. This handy packet contains every Marker and Token in the Core Rules, Gaining Grounds competitive play format, and the newest... [click here for more] |
MU Jokers |
$3.00
|
1/64 scale (20mm - 25mm): This is a 48x48 inch playmat designed for 1/64 scale die-cast cars and 20mm-25mm wargames when printed at full size. It's compatible with Gaslands as a multi-use combat racing track, including worn-down paint lines across the track that can be used to indicate starting positions, gates, and finish lines. A sneaky shortcut in... [click here for more] |
Dave Graffam Models |
$5.95
|
Easy to build: This paper model kit is easy to assemble, requiring just 6 or 7 cardstock paper sheets to print on (110 lb. or 199gsm matte stock recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. For better results, a foamcore base can be used.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be... [click here for more] |
Dave Graffam Models |
$3.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$2.95
|
Bloody Red FlagThe Anglo-Dutch Naval Wars A guide for modellers and wargamers.
A guide to the great Anglo-Dutch Naval wars of the Seventeenth Century, when two great naval powers cut their teeth on new tactics, new methods, and fought for trade and colonial domination of the whole world.Learn about the ships, the men, the heraldry and the tactics.
... [click here for more] |
Vandering Publications |
$12.99 $8.99
|
This is July issue of the magazine. In this issue the author shows how they made paper model warships for campaign play. Several articles on different games including deth wizards (snarling badger studios), GW LOTR (older edition) and more. articles show terrain ideas, low budget tables, junk builds etc.
All projects include a diverse array of low budget materials and can include clay, tinfoil,cardboard... [click here for more] |
MJ hobby corner |
$3.00
|
Easy to build: Here's everything you need to create thousands of unique cargo pods for your space adventures! This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm... [click here for more] |
Dave Graffam Models |
$2.95
|
This is a pack of 7 sheets of unit counters for print and play with PanzerBlitz 80. PB80 let players play with AIW rules on what if battles between NATO & Warsaw Pact in 1980s. All units are color-coded by battalions for easy reference. There are units from various nations including West Germany, Soviet Union, USA, Britian, France, Poland, Czech...etc. There is a bonus of 4 all new PB style scenario... [click here for more] |
Homeland Workshop |
$15.00
|
This month we see the creation of a Rat man Vehicle with nothing but a plastic bottle, some barbecue sticks and old plastic sprues. All projects vary in complexity with some being easier than others.
The author also shows how he paints scratch made armor and ships, all made by hand. Tool discussions and lots of photos describing every project make this a good source of ideas to any crafter. All scratch... [click here for more] |
MJ hobby corner |
$3.00
|
A Formidable Enemy is a fast-paced skirmish game set in the French & Indian War. There are two PDF downloads included with your purchase: a 36 page rulebook, and a 45 page book of army lists and rosters. You can use one of the six premade armies, or create your own force with a comprehensive point system. The game has a historical “feel” through the use of Assets specific to different types... [click here for more] |
Jade Tower Studio |
$0.69
|
This set provides an add on to ' Wargaming on a Grid : Northern Europe.
It includes: a 'Plain flat desert' grid and overlays to provide coastal edges, urban areas, Dunes, soft sand, salt flats, impassible rough/ high ground and linear edge strips for Wadi's Rivers, and ridges (which can be defined as impassible or contours according to scenario.
In additon there is a single sheet of Nato style... [click here for more] |
Geoff Curran |
$3.00
|
Easy to print: This paper terrain kit includes ground tiles, security kiosks and cargo pods. The models are easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be... [click here for more] |
Dave Graffam Models |
$1.95
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 3 sheets includes 98 counters. ... [click here for more] |
David Brandon |
$3.45
|
Easy to build: This cardstock print-and-build terrain kit is easy to assemble, requiring just cardstock paper sheets to print on (index weight, 110#, or 199gsm recommended), hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale (1 inch equals 5 feet or 2 meters), and... [click here for more] |
Dave Graffam Models |
$2.95
|
Scratch Builder foam crafts is a single project issue showing how i built a pair of airships for my games. The two models are heavily inspired by the old rules of sky Galleons of Mars. This 25 page document presents all the steps for cutting, shaping and adding detail to the foam. The project uses recycled foam and other materials, making it a low budget build.
For more in depth articles on sculpting... [click here for more] |
MJ hobby corner |
$1.59 $1.19
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 3 sheets includes 83 counters. ... [click here for more] |
David Brandon |
$3.45
|
Welcome to the first expansion of Alien Zoology! Now you can also go hunting for alien creatures with several players.
Multiplayer Hunts adds:
-Multiplayer game mechanic (2+ Expedition Teams)
-Encounter more than one Alien Creature during a hunt (2+ creatures)
-Build an Alien Zoology Travel Box using only one miniature box (1:72) and the attached paper templates... [click here for more] |
Titus Painting |
Pay What You Want
|
You will need a set of Strength and Honour Wargame rules to make use of this set.
Strength and Honour is written by Mark Backhouse and is available from the Too Fat Lardies Website - both printend and PDF versions are available.
Strength and Honour is a large scale wargame usually played on a wargame table with miniatures and terrain. However this... [click here for more] |
Geoff Curran |
$6.47
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 3 sheets includes 143 counters. ... [click here for more] |
David Brandon |
$3.45
|
Easy to build: This paper model kit is easy to assemble, requiring just 6 or 7 cardstock paper sheets to print on (110 lb. or 199gsm matte stock recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. For better results, a foamcore base can be used.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be... [click here for more] |
Dave Graffam Models |
$4.95
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 3 sheets includes 113 counters. ... [click here for more] |
David Brandon |
$3.45
|
This is a single project issue of scratch builder. This issue introduces building 6mm plastic mesh armies and a fort terrain piece. Future issues in this series will focus on other genres and new units. A fantasy black powder age is the underlying theme for all units shown in the document. ... [click here for more] |
MJ hobby corner |
$3.00
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 5 sheets includes 173 counters. ... [click here for more] |
David Brandon |
$5.65
|
This month's scratch builder concentrates on a city scape built entirely with recycled materials.
Scrath builder monthly specializes in very low budget crafts, terrain and other wargaming related projects. Hand made models are also shown with a variety of photos of the construction process. ... [click here for more] |
MJ hobby corner |
$3.00
|
Create your own custom unit cards with these form fillable cards!
Here we have unit cards for use in OnePageRules Grim Dark Future games. These are PDF files which have all fields available to fill in, and print at Tarot card size, for sleeves which are readily available (73x122mm). You can also quickly and easily add a photo of your own unit into the card to make it very personal to your army. ... [click here for more] |
Scoutsifer |
$3.99
|
A Full set of 4x4cm counters of medieval ships, damage counters and templates suitable for use with David Manley's Lord of the Sea(with permission from David)- these rules are also available on the Wargame Vault.
This set includes small, medium and large cogs (three variants of the latter two with catapults, cannon or trebuchet), carracks, nefs, hulks, balinger, large and boats,... [click here for more] |
Geoff Curran |
$6.76 $5.34
|
Miniature ships look great on the table but are expensive to collect and are limited by what is available. Now you can field every vessel that is included in Sail and Steam Navies. These counters can be printed on full sheet labels in 8 1/2 in. by 11 in. or A4 size in full color 300 DPI. This set of 4 sheets includes 175 counters. ... [click here for more] |
David Brandon |
$3.45
|
Log In 
