| Title |
Publisher |
Price |
A range of aige of sail ships , there is a single zip file containing all the models in the collection ... [click here for more] |
Twylite Games |
$22.45 $16.93
|
CUBES!
Printable 3D cube heads (in a weathered and crumbling stone finish) for use with 28mm wargames figures. Cubes include a little nubbin for easy attachement to a range of figures.
Included are unsupported & supported files for a set of 12 CUBE HEADS to suit 28mm scale infantry and 3 BIG CUBE HEADS that are slightly larger and would work well with Ogre sized units at that scale.
THE... [click here for more] |
Apocrypha_Now |
$3.00
|
STL files of each a 9pd and a 32pd naval cannon. The files came in both, as complete assembly and split in carrier and barrel . The geometry is adapted to FDL and scale, so some small detailles are a bit more massive than in reality.
it contents STL-Files, made for 3D printing, to be used for table-top-gaming in scal 1:72 (25mm), but can be used, if scaled by printer, between 1:32 to 1:700. ... [click here for more] |
Xerbath |
$3.90
|
Russian Village Church
Voxel House is launching its line of buildings and ruins from the Second World War for its Wargame Iron Cross system. Our buildings are made for 1/100 (15 / 18mm) scale and can also be used on the 1/200 or 1/285 scale. All of our buildings come in parts, enabling assembly as a one-piece 3D kit or print.
Russian Village Church for your game scenario, Common... [click here for more] |
Voxelhouse |
$5.99 $2.99
|
A typical small house of the type built by the early settlers of New England. This could be used for any small dwelling up to the early 1900s. The time and effort needed to make planks out of trees by hand resulted in making homes just large enough for the family to get out of the weather. They genreally had little furniture, and were of modest, simple construction. Up to a dozen people might dwell... [click here for more] |
Alex MacDonald |
$5.00
|
Includes all necessary files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
cannon_fix.stl
cannon_halfs_fix.stl
ballista_fix.stl
haroun_fix.stl
mortar_fix.stl
mortar_halfs_fix.stl
smallcannon_fix.stl
Minimum printbed needed... [click here for more] |
ESLO |
$8.95 $2.95
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print 4 different houses, just load them in the software provided with your 3D printer and print them as many times as you like !
The STL files are printable on any 3D printer, we recommend using... [click here for more] |
Via Ludibunda |
Pay What You Want
|
An add-on for the Vauban fortress basic set, with 5 types of bastions, an adapter matching to the rectangular fortress set, and courtine extensions allowing to increase the width of the parapet walk (you need theCourtine extension set).
With this extension, you'll get a really mighty fortress in every size you want.
Al STL-Files in 25mm and 28mm scale. ... [click here for more] |
Xerbath |
$13.50
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
sheft_fix..stl
chair_fix.jpg.stl
table_fix.stl
wandrobe_fix.stl
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale... [click here for more] |
ESLO |
$6.95 $4.95
|
This set contains a scale model of a coastal battery, modular build with end and depot segments, together with a French Gribeauval 16 lb gun on its carriage. It is matching to the other fortress sets
its contents STL-Files, made for 3D printing, to be used for table-top-gaming a scale 28mm and 25 mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$9.99
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print 4 different houses, just load them in the software provided with your 3D printer and print them as many times as you like !
You can mix and match some parts with the designs from the Village... [click here for more] |
Via Ludibunda |
Pay What You Want
|
Some extensions to increase the with of the parapet walk, straight and edged ones.
Both matching to the Vauban fortress courtines and bastions, to get more room for artillery or manning of the walls.
STL-Files, both in 28mm (1:64) and 25mm (1:72) for 3D printing, ... [click here for more] |
Xerbath |
$2.00
|
![Endless: Fantasy Tactics - Dragoon [F] (STL)](https://d1vzi28wh99zvq.cloudfront.net/images/2597/310001-thumb140.jpg)
On The Lamb returns!
The Dragoon has always been our most popular miniature, and now she is back in 3D printable format.
We reccomend using a resin printer for the best results. ... [click here for more] |
On The Lamb |
$6.00
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print some Drow or Dark Elves buildings just load them in the software provided with your 3D printer and print them as many times as you like !
The STL files are printable on any 3D printer, we... [click here for more] |
Via Ludibunda |
Pay What You Want
|
On The Lamb returns!
The Badger-At-Claw for Brushfire was our first miniature released 10 years ago, for its anniversary we have recreated it as a digital sculpt allowing you to print it off at home. We hope this will be the first of many digital rereleases for both Brushfire and Endless.
We reccomend using a resin printer for the best results. A supported version... [click here for more] |
On The Lamb |
$6.00
|
A model of a Coehoor mortar, used from 1750 till ACW in various roles as ship's armament, fortification or siege weapon.
It is a very little object, and the printing result in scale 25mm was not confidently.
But maybe your printer allows printing or your scale is bigger, so try it - it's free! ... [click here for more] |
Xerbath |
FREE
|
![Endless: Fantasy Tactics - Chibi Dragoon [F] (STL)](https://d1vzi28wh99zvq.cloudfront.net/images/2597/310002-thumb140.jpg)
On The Lamb returns!
A chibi edition of our female Dragoon was created in response to fan demand, and now she is back in a 3D Printable format.
We reccomend using a resin printer for the best results. ... [click here for more] |
On The Lamb |
$6.00
|
This set contains a French 16lb Gribauval garrison cannon on a garrison carriage
its contents STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and mm (1:64 and 1:72)
dimension 1/72 about 3cm x 7cm, 28mm 3,4cm x 8cm ... [click here for more] |
Xerbath |
$3.99
|
This set contains STL files to create a 4-pointed Vauban-type fortress, modular build matching to the other fortress sets.
its contents STL-Files, made for 3D printing, to be used for table-top-gaming in scal 1:72 (25mm), but can be used, if scaled by printer, between 1:32 to 1:700. ... [click here for more] |
Xerbath |
$28.00
|
An accessories-set for the Vauban fortress (or other use), coming with two different troughs, two tables and chairs, a palas-window, stairs clock- and counter-clockwise and a scaling ladder.
Al STL-Files in 25mm and 28mm scale. ... [click here for more] |
Xerbath |
$3.50
|
This set describes a diamond-shaped Bastion with an Echaugette , matching the 4-pointed Vauban Fortress, with 90°angle and widened battlements. (or, with the extension to 5-pointed fortress)
its contents STL-Files, made for 3D printing, to be used for table-top-gaming in scal 1:72 (25mm), but can be used, if scaled by printer, between 1:32 to 1:700. ... [click here for more] |
Xerbath |
$3.90
|
Log In 
