| Title |
Publisher |
Price |
Upgraded version of the construction cranes for tabletop miniature sceneries. Suited for tabletop gaming, dioramas and low poly gaming, design, animation. Includes 6 models (19 individual parts), high attitude field cranes, one short overhang cranes and a modular extenders. Ideal for construction modern, interwar and scifi settings over plastic, paper and cardboard sceneries.
SPECS:... [click here for more] |
MuM |
$18.00
|
"Undoubtedly the most iconic and easily recognized building in Stalingrad is a Grain Elevator. Built-in 1940, it was massive: 90 meters long, 50 meters wide and 35 meters high, and made of steel-reinforced concrete. "
From http://www.stalingradtours.com/en/sights/articul/stalingrad_grain_elevator
This is a huge 1/300 scale Kit !
If you print at the original... [click here for more] |
Voxelhouse |
$2.99
|
6mm sci-fi infantry models
-6mm figure stls.
-6 different pose.
-Supported/unsupported files.
... [click here for more] |
IliadaGameStudio |
$2.50
|
A set of 3D model STL files representing the Confederate casemate ironclad Mississippi, which was built at New Orleans but not completed prior to the fall of the city and was burnt to prevent capture. Three variants are supplied, showing an early planned configuration with 2 funnels, her final planned appearance, and her appearance when she was destroyed The models are scaled at 1/600, and print well... [click here for more] |
Long Face Games |
$4.04 $3.03
|
8 detailed and different buildings in this set. Building A and F has removable water towers.
... [click here for more] |
IliadaGameStudio |
$8.00
|
A set of six 3D models representing the Confederate squadron that operated on and around Lake Ponchartrain. The models are scaled to 1/600. The following ships are included:
CSS Carondelet
CSS Bienville
CSS Arrow
CSS Grey Cloud
CSS Oregon
CSS Pamlico
... [click here for more] |
Long Face Games |
$24.26
|
STL file for SLA printers.
6mm sci-fi vehicle stls.
... [click here for more] |
IliadaGameStudio |
$7.00
|
A 3D model file representing the Union timberclad gunboat USS Avenger which served on the Mississippi with Ellet’s “Ram Fleet”. The model is scaled at 1/600, scale to 50% in your slicer for 1/1200. ... [click here for more] |
Long Face Games |
$5.39
|
A 3D model file representing the Union stern wheel gunboat Cricket, which served on the Mississippi and was Admiral Porter’s flagship for a while. The STL file is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$5.39
|
In 'Kings in Conflict' attacking and capturing your opponents King is the aim of the game. It's chess! This is a set of downloadable stl files that allows you to 3D print and play with your own unique chess set.
The files include a set of chess pieces (including an alternate pawn and an alternate rook), a board (assembly required), 8 different checker/draught pieces, alternate tiles for the chess... [click here for more] |
FoxCraft |
$15.00
|
We are releasing our first two sets of infantry Miniatures for Funny Wars. Are STL Files for your SLA printer in sacle of 15mm.
French Units
German Units
Get the basic rules here: https://www.wargamevault.com/product/470908/Funny-Wars-Basic-Rules
Geth the Infantry Rules here: https://www.wargamevault.com/product/471880/Funny-Wars-Infantry-Rules... [click here for more] |
Voxelhouse |
$3.19 $2.29
|
This set of STL files was designed for FDM and SLA printers, with your gaming tables, dioramas, and Hot Wheels track models in mind. . Scale 1:64. Human figure are not included, they are only for scale representation. ... [click here for more] |
Voxelhouse |
$3.49
|
www.Grim-Saeculum.com
A complete 3D-printable RPGame with skirmish fights.
You can choose:
Play a great adventure in the world of Grim-Saeculum. There you have to complete various tasks / quests and you can explore cities or dungeons, you will find new equipment and experience and can level up your heroes.
Or you play small skirmishes one after the... [click here for more] |
ESLO |
$39.95 $24.95
|
Generic generator model .
... [click here for more] |
IliadaGameStudio |
$1.50
|
STL file for SLA printers.
7 Hover vehicles
... [click here for more] |
IliadaGameStudio |
$5.00
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
Perfect for made cityblock in WW2 or mordern:
More buildings, streets and accessoirs can you download on Wargamevault.
This parts are included (+ buildung on different ground bases with sidewalks):
Many details:
with removeable floor, roofs, windows,... [click here for more] |
ESLO |
$10.95 $6.95
|
STL file for SLA printers.
6mm sci-fi vehicle stls.
Pay what you want!
... [click here for more] |
IliadaGameStudio |
Pay What You Want
|
Giant combat robot tanks are one of the weapons created by the Germans at the end of WWII. The tube computers developed by the Germans were one of the greatest advances in this post-war period. German scientists managed to create an artificial intelligence for combat, very well armed and armored, in the form of these gigantic vehicles. It is one of the most terrifying weapons to date on the battlefield!... [click here for more] |
Voxelhouse |
$1.99 $1.29
|
STL file for SLA printers.
Wheeled vehicles to fight in dry/sandy enviroments.
... [click here for more] |
IliadaGameStudio |
$5.00
|
s selection of stl files of vietmam monitors in 10mm scale and to print on a FDM printer without supports ... [click here for more] |
Twylite Games |
$11.55
|
3D STL files for two different pose for Tripods.
You can easily increase the size for larger scales.
Standing pose: 34mm height
Crouching pose: 20mm height
... [click here for more] |
IliadaGameStudio |
$3.00
|
The newest and exclusive miniature series by Voxelhouse: the Mars Agenda. These are 15mm scale miniatures for your gaming table, dioramas, and much more. This series will be part of the upcoming game Mars Agenda.
In this set, we are introducing mars rovers, which includes:
- Rover
- Crane Rover
- Mine Cart
- Container
- cart
Wheels and separeted wheels version included
NOTE: ASTRONAUTS... [click here for more] |
Voxelhouse |
$2.99
|
Total 6 buildings and 3 ruins are included
You will get all files to print many different Buildings and ruins. Delivered in downloadable .stl file format for your 3D Home printer.
This set include:
Minimum printbed needed is 15 x 15 cm and 15 cm high.
Example Scale factor:
10mm = 66 %
15mm = 100 %
20mm = 133 %
28mm = 166 %
If you need a printed Version, please write us a email.
Printed... [click here for more] |
ESLO |
$34.95 $19.95
|
STL file for SLA printers.
You can design your Mecha with 3 different heavy tools
You can swap weapon platforms between TYPE ONE and TYPE TWO
... [click here for more] |
IliadaGameStudio |
$3.00
|
We are releasing our new set of spacecraft miniatures, focused on NASA-style design. This set contains our Ring station and our Sky horse rocket exclusive STL files for SLA printers. The approximate scale is 1/600, and they can be scaled up or down. Our goal is to cater to the audience who enjoys this style of gaming and some board games with this theme. The models are:
Buy the set 1... [click here for more] |
Voxelhouse |
$4.99 $3.99
|
A simple house with a ruins evrsion for your Funny Wars table. The original scale is 15mm but can be scaled up to 28mm (approximately 180%). Designed for STL and FDM printers.
28 mm scale - 180%
Funny Wars is a simple Alternative WW1 wargame for your Saturday afternoons, where the objective is to have fun with your friends and have a good laugh at the end of each match. The game... [click here for more] |
Voxelhouse |
$2.39 $1.99
|
This is the six set of minis from our Funny Wars line, designed for more cartoonish wargames and versatile use. The original scale is 15mm but can be scaled up to 28mm (approximately 180%). Designed for STL printers.
28 mm scale - 180%
Funny Wars is a simple Alternative WW1 wargame for your Saturday afternoons, where the objective is to have fun with your friends and have a good... [click here for more] |
Voxelhouse |
$3.19 $2.29
|
A 3D model file representing the Union ram “Switzerland”, which served in Ellet’s United States Ram Fleet. The model file is scaled for 1/600 – set the scale to 50% in your slicing software for 1/1200 ... [click here for more] |
Long Face Games |
$5.39
|
STL file for SLA printers.
... [click here for more] |
IliadaGameStudio |
$3.00
|
This is the five set of weapons from our Funny Wars line, designed for more cartoonish wargames and versatile use. The original scale is 15mm but can be scaled up to 28mm (approximately 180%). Designed for STL printers. This set contais 2 trench mortars: french and german
28 mm scale - 180%
Funny Wars is a simple Alternative WW1 wargame for your Saturday afternoons, where the objective... [click here for more] |
Voxelhouse |
$3.19 $2.29
|
STL file for SLA printers.
6mm sci-fi vehicle stls.
... [click here for more] |
IliadaGameStudio |
$5.00
|
This 3D print product lets you print 1 highly detailed, 32mm scalemultipart miniature of one Cardassian Soldier for use with the Star Trek Adventures tabletop roleplaying game. Other Star Trek Adventures miniatures are available to print at home. Check them all out.
Files have been pre-hollowed where possible, and all files include supported versions for easier printing.... [click here for more] |
Modiphius |
$3.00
|
A Space Contaiers for our Space Mule Cargo Ship. Proudly build by Cosmo Motors shipyards! For your sci-fi wargame table and space combat games. For SLA, the Printers size about 1.5 inches long.
- Cargo Container
- Gun Container
- Liquid Container
- Fighter launcher container with strip
- Missile Container
Download Space Mule here! ... [click here for more] |
Voxelhouse |
Pay What You Want
|
An STL file representing the Danish casemate ironclad HDMS Odin. She was laid down in 1871 and completed in 1874, serving until 1912. The model is scaled to 1/600 and prints well at 1/1200
. ... [click here for more] |
Long Face Games |
$4.04
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
Perfect for made cityblock in WW2 or mordern:
More buildings, streets and accessoirs can you download on Wargamevault.
This parts are included:
20 Bases (different designs)
with OpenLock bases
Example:
thin connectors
11 concrete streets
11 cobblestone... [click here for more] |
ESLO |
$12.95 $7.95
|
Thinking about our players, Voxelhouse is introducing a line of products with more competitive prices: the combosets. These are small thematic sets focused on our gaming systems such as Iron Cross and Hotwar. These combo are themed Mars . They include:
Mars Memorandum Game - https://www.wargamevault.com/product/235100/Mars-Memorandum--Solitaire-Strategic-Game-About-Mars-Colonization
Vesarius... [click here for more] |
Voxelhouse |
$6.29 $4.99
|
An STL file representing the ironclad monitor Puigcerda. She was built in France in 1878. Despite being a small ship she carried two turrets, each with a 120mm breech loading rifle. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
STL file for SLA printers.
Quadmech for construction
... [click here for more] |
IliadaGameStudio |
$3.00
|
9 different buildings in this set. I based dryland buildings along with depo buildings
... [click here for more] |
IliadaGameStudio |
$7.00
|
Thinking about our players, Voxelhouse is introducing a line of products with more competitive prices: the combosets. These are small thematic sets focused on our gaming systems such as Iron Cross and Hotwar. These combo are themed Scifi Vehicles and Buildings for Mooncresta. They include:
Soviet Minis for Moon Cresta - https://www.wargamevault.com/product/424919/Soviet-Minis-for-Moon-Cresta... [click here for more] |
Voxelhouse |
$4.99 $3.49
|
A set of two 3D model files representing the “tower ships” designed by John Roy that were building at New Orleans. Up t six ships were planned but none were completed. Two models are included, one with an exposed stern wheel, the other with the stern wheel enclosed. The models are sized at 1/600. Scale by 50% in your slicer for 1/1200. ... [click here for more] |
Long Face Games |
$5.39
|
Step into the nostalgia of 1950s B-movie Sci-Fi with 'Space Station Zeta' 3D printable miniature line. Recreate iconic interstellar battles with meticulously detailed models that capture the charm of retro space adventures."
Immerse yourself in thrilling wargames set amidst the stars, where you command brave spacefarers and encounter alien beings. With 'Space... [click here for more] |
Voxelhouse |
$1.99 $1.49
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
Perfect for made cityblock in WW2 or mordern:
Content:
small brickhouse
garden
hydrant
power poles
2 trashcan
2 wooden outside
rain gutter
2... [click here for more] |
ESLO |
$10.95 $8.95
|
Outpost Utility Truck is a collection of 3D printable files that can be built into a variety of six-wheeled science fiction trucks. They have been designed to print easily and to work with a variety of 28-32mm scale figures. They can be used for scatter terrain on a sci-fi tabletop for a variety of systems like Games Workshop Warhammer 40K and Warhammer 40k Kill Team,... [click here for more] |
Tabletop Terrain |
$4.50
|
Stalingrad Univermag
Stalingrad Univermag (image from http://battle.volgadmin.ru/sitede/Frontphotos01.aspx)
Extending our line of wargame buildings, we are bringing to your table the Stalingrad Univermag. designed in 1/300 scale. One of Stalingrad's most famous buildings, he served as HQ of Von Paulus until the surrender on January 31, 1943. It can be used on your wargame table in the 1/300... [click here for more] |
Voxelhouse |
$3.99
|
New STL files for your 3d printer! We are releasing our infantry units in version 2.0 and are working on various sets of figures and weaponry. In this set, we bring supplies crates, ammo boxes, oildurms, the and Jeep in a box for dioramas and game scenarios for DDAY or our games Iron Cross and Hotwar2. 6mm scale!
Check it out!
Suplies
- Jeep in a Box
- Oil Drums
- Ammo Crates
- Wooden Boxes... [click here for more] |
Voxelhouse |
Pay What You Want
|
A 3D model file of the Peruvian casemate ironclad “Loa”. Based on contemporary Confederate designs, the ship was based in Callao and fought against the Spanish during the Chincha Island War of 1866. During the War of the Pacific she remained at Callao as a training and stores ship, but she makes a useful “what if?” for WotP campaigns. The model is scaled at 1/600, and prints well at 1/1200... [click here for more] |
Long Face Games |
$4.04
|
Universal Truck is a collection of 3D printable files that build a detailed vehicle. They have been designed to print easily and to work with 28-32mm scale figures. The vehicle can be used for systems like Games Workshop Warhammer 40K and Warhammer 40k Kill Team, Corvus Bellis Infinity, and many other sci-fi and post-apocalyptic games.
Victoria Miniatures... [click here for more] |
Tabletop Terrain |
$5.80
|
STL files designed and tested for SLA printers.
Hull and Turret separate.
-HVT81 (vehicle) 6mm no support
-HVT81(vehicle) 6mm SUPPORTED
-HVT81 (vehicle) 15mm no support
-HVT81(vehicle) 15mm SUPPORTED
... [click here for more] |
IliadaGameStudio |
$1.50
|
This 3D print product lets you print 1 highly detailed, 32mm scale multipart miniature of one Jem’Hadar Soldier for use with the Star Trek Adventures tabletop roleplaying game. Other Star Trek Adventures miniatures are available to print at home. Check them all out.
Files have been pre-hollowed where possible, and all files include supported versions for easier printing.... [click here for more] |
Modiphius |
$3.00
|
Log In 
