| Title |
Publisher |
Price |
A 3D model file representing the Union ironclad “Keokuk. Similar to a monitor, but with fixed gun towers. “Keokuk”was heavily damaged at the first battle of Charleston and sank shortly after The model is scaled to 1/600 and prints well at 1/1200. ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model STL file of the Confederate sidewheel casemate ironclad Baltic. The ship operated on Mobile Bay and on the Tombigbee River until she was dismantled in 1864. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the US Navy's Landing Craft Infantry (Large), or LCI(L), in this case the “round con, side ramp” variant. The model is scaled at 1/600, but can be easily rescaled to 1/300 or 1/700 in your slicer software. ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model STL file representing thebroadside ironclad Galena, one of the first trio of Union ironclads with Monitor and New Ironsides. Galena was an unsuccessful design and was heavily damaged at the battle of Drewry’s Bluff The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$5.39
|
STL file for SLA printers.
7 civilian cars for 6mm tabletop sci-fi games
All vehicles painted by Benjamin D Wendt
... [click here for more] |
IliadaGameStudio |
$5.00
|
A Military Magnetic Levitate train proudly build by Cosmo Motors shipyards! For your sci-fi wargame table on a 1/300 scale (6mm). For SLA, the Printers size about 6 inches long. This kit contain the following stl files
- A complete train: Locomotive, troops car, missile car, gun car
- 3 new curves section
Buy the Civil Maglev here: https://www.wargamevault.com/product/359920/Maglev--Magnetic-levitation-train... [click here for more] |
Voxelhouse |
$2.99
|
We are presenting our Iron Cross players with our Stalingrad Project. The idea is to launch a series of miniatures modules on the scale of 1/300 to release a campaign focused on Stalingrad. Let's start with the initial module of Fábrica Red October, where we have three more sections of it. The idea is that our game can serve all of our wargamers and provide many hours of fun. We are waiting for... [click here for more] |
Voxelhouse |
$4.99
|
A set of 3D model files representing the Union monitors of the Canonicus Class. Files are provided for 1/1200 (one piece) and 1/600 (separate hull and turret) models. There are two turret variants in each scale, one as designed, the other with a “bullet shield” added to the top of the turret. ... [click here for more] |
Long Face Games |
$5.39
|
An STL file representing the Confederate gunboat CSS Livingston. She was a ferryboat converted at Columbus, Kentucky in 1862. She had a short career, working on the Mississippi and Yazoo rivers. She was burnt later in 1862 to avoid capture. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
An STL model file representing the Confederate casemate ironclad “Atlanta” which operated on the Wilmington river and was captured at the battle of Wassaw Sound on 17th June 1863. After capture she served in the US Navy for the rest of the civil war. She was later sold to Haiti, but sank on her delivery voyage. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model STL file representing the ironclad “Nashville”, which was built and operated near Mobile, Alabama. The ship took part in several actions around Mobile Bay and survived the war. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the revenue cutter Harriet Lane. She served initially with the Union Navy but was captured by the CS Bayou City during the Union attack on Galveston, serving with the Confederate fleet thereafter. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
For your dioramas or gaming table. Designed for SLA printers. You can scale them down by 80% to 85% for 1/64 scale!
... [click here for more] |
Voxelhouse |
$2.99
|
This model is modular and can added more and more for a emplacement.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Printed and painted:
Minimum printbed needed is 20 x 20 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40... [click here for more] |
ESLO |
$7.95 $6.50
|
A set of 3D files representing a Union mortar raft, and a Mississippi flatboat, often used to transport cargo downriver (3 variants provided) STL files is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the Union sailing warship Morning Light which operated with the Gulf blockading Squadron near New Orleans. She was captured by Confederate gunboats in January 1863 and burnt. The STL file is scaled for printing in 1/600. and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
Recon Corner is supplementary rules for our Iron Cross wargame, always bringing something new to you. In this "report," we bring rules for the British Army in WW2. This report brings you:
- Rules
- Exclusive Miniatures for British infantry in 6mm
- Exclusive Scenery "Sea of Sand"
- 1 Crusader Tank Card
Have Fun!
PLEASE SUPPORT OUR WORK!
Take Iron Cross Core Book here!... [click here for more] |
Voxelhouse |
Pay What You Want
|
New STL files for your 3d printer! "We are releasing our infantry units in version 2.0 and are working on various sets of figures and weaponry. In this set, we bring infantry from the USA, Soviet, and German, along with the first anti-tank cannons! Check it out!
USA
- Bazooka and AT 37mm
German
- Panzerschreck and AT 37mm (Panzerfaust version)
Soviet
- AT Rifle
- AT 45mm
PLEASE SUPPORT... [click here for more] |
Voxelhouse |
Pay What You Want
|
An STL file representing the Union river gunboat Queen City. She was taken into service in 1863 and patrolled the Mississippi and Tennessee rivers In June 1864 the ship was surprised by a force of Confederate cavalry and artillery, leading to her capture. The Confederates burned and blew up the ship when the USS Tyler mounted a rescue attempt. The model is scaled to 1/600 and print well at 1/1200... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file representing the Union paddle gunboat USS Miami. The ship fought at Ship Island and New Orleans, then serving in other actions on the Mississippi, then to North Carolina and the battle of Albemarle Sound. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$4.04
|
A set of STL files representing the Union double ended gunboat “Cimmaron” which served with the Southern Blockading Squadron around Charleston. She accompanied the USS Weehawken at the battle of Wassaw Sound on 17th June 1863 where the CSS Atlanta was captured. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
For your wargame table! Exclusive New 6mm infantry for 1/285 or 1/300 battles. This set includes
Japanese (Based and Unbased)
- 3 infantry stands
- Machine Gun Stand
- Mortar Stand
British (Based and unbased)
- 3 infantry stands
- Machine Gun Stand
- Mortar Stand
Pay what you want for this set. It was designed for our Iron Cross wargame, but it can be used in any game! More on the... [click here for more] |
Voxelhouse |
Pay What You Want
|
A set of 3D model files covering the Miantonomoh class double turreted monitors. Three models are included, Monadnock depicting the first three of the class in normal service, Miantonomoh with added hurricane deck and bulwark for duties in the open sea, and Tonawanda, the last ship of the class built to a modified design. The models are scaled at 1/600, and print well at 1/1200 ... [click here for more] |
Long Face Games |
$5.39
|
A 3D model file representing the Confederate gunboat “General Thompson”, part of the River Defense Fleet” on the Mississippi. STL file is scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
We are releasing our new set of spacecraft miniatures, focused on NASA-style design. There are 5 types available in exclusive STL files for SLA printers. The approximate scale is 1/600, and they can be scaled up or down. Our goal is to cater to the audience who enjoys this style of gaming and some board games with this theme. The models are:
... [click here for more] |
Voxelhouse |
$4.99 $3.99
|
This set of STL files was designed for SLA printers, with your gaming tables, dioramas, and Hot Wheels track models in mind. Scale 1:64. Thi set contains garage tools and 5 cool motors for your conversions. ... [click here for more] |
Voxelhouse |
$2.99
|
A pair of STL files representing Confederate cottonclad gunboats, based on the CSS Uncle Ben and Josiah Bell, which served near New Orleans. and, in January 1863, captured and burnt the Union sloop USS Morning Light. In an action off Sabine Pass. The STL files are scaled for printing in 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A set of 3D model files representing the Confederate casemate ironclad CSS Texas. She was built for service with the James River Squadron, defending the Confederate capital of Richmond. She was incomplete when Richmond fell in 1865 The model is scaled to 1/600, and prints well at 1/1200. ... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the Danish turret ship, Rolf Krake. She was built in Scotland in 1863 and was equipped with two turrets designed by Captain Cowper Coles. She fought in the Second Schleswig War of 1864. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
this item contains a collection of STL's representing the fleet of the Regia Marina at a 1/6000 scale. printing is recommended using a resin printer.
... [click here for more] |
Badger with a quill |
Pay What You Want
|
A set of 1/2400 scale STL files for LFG's "Those Who Seek Death" fleet action rules. The set comprises ten types of bases, five for the Korean navies, five for the Japanese, of the following types:
JAPANESE
O Ataka Bune
Ataka Bune (two varieties)
Seki Bune
Mekura Bune
KOREAN
Geobukseon
Geomseon
Panokseon Command
Panokseon (two varieties)
... [click here for more] |
Long Face Games |
$6.74
|
santiago de cuba ships , there is a single zip file containing all the models in the collection
There are now 2 seperate zip files , one with ship names on slightly wider bases and without names on the origional bases
Spanish
AC01 Infanta maria teresa 46.22mm length for 1/2400
AC02 Vizcaya 46.22mm length for 1/2400
AC03 Almirante Oquendo 46.22mm length for 1/2400
AC08 Cristobal Colon 61.25mm... [click here for more] |
Twylite Games |
$10.78
|
More SLA Files for your 3d printer: Banks! We try to bring more buildings for youe wargame tabel and for our Iron Cross System! This set contains: - German Bank
- Engilsh/American Bank
- Bank without letters
- 2 street buildings
Have Fun!
PLEASE SUPPORT OUR WORK!
Take Iron Cross 1st edition Core Book here!
Take Iron Cross 2nd edition Core Book here!... [click here for more] |
Voxelhouse |
$2.19 $1.59
|
A set of five 3D model file representing generic Confederate riverboat rams and gunboats, based on the types operated around \Memphis in 1862. The STL files are scaled for printing in 1/600. Set scale to 50% in your slicer to print at 1/1200 ... [click here for more] |
Long Face Games |
$8.09
|
An STL files representing a generic Union hospital ship. A number of such vessels operated with the Union riverine fleets, providing essential care for sailors and soldier wounded in combat. The model is scaled to 1/600 and prints well at 1/1200
. ... [click here for more] |
Long Face Games |
$4.04
|
CUBES!
Printable 3D cube heads (in a weathered and crumbling stone finish) for use with 28mm wargames figures. Cubes include a little nubbin for easy attachement to a range of figures.
Included are unsupported & supported files for a set of 12 CUBE HEADS to suit 28mm scale infantry and 3 BIG CUBE HEADS that are slightly larger and would work well with Ogre sized units at that scale.
THE... [click here for more] |
Apocrypha_Now |
$3.00
|
An STL file representing the Union gunboat and converted ferryboat USS Westfield. She led the Union force at Galveston where she was run aground and burnt to avoid capture. Two variants are included, one with the ship’s name embossed , the other without. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file representing the Confederate gunboat CSS Teaser which served for a time as the support craft for the CSS Virginia She was captured by the Union and then served as USS Teaser. The model is scaled at 1/600, scale to 50% in your slicer for 1/1200. ... [click here for more] |
Long Face Games |
$2.70
|
This American Lunar robots can be used in your game table. Three exclusive models:
Taylor MKI
Russel Type II (based and unbased)
Wilson model 77
Have fun and make your gaming table look even better! STL files for SLA 3dprinters.
Buy Moon Cresta rules and miniatures here!
Note:
Several players have asked me if these miniatures could be re-scaled to 10mm scale. Just increase... [click here for more] |
Voxelhouse |
$1.29
|
An STL file representing the Confederate gunboat Warrior ,a converted towboat that served with the Confederate River Defense Fleet. She was lost at the battle of New Orleans. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
Joseph Brown's river ironclad gunboats, Tuscumbia, Indianola and Chillicothe, modelled as a set of three .stl files for 3-D printing. The models are scaled for 1/600 printing, but can be rescaled and printed at 1/1200 ... [click here for more] |
Long Face Games |
$10.11
|
A 3D model file representing the Union screw steamer USS Pocahontas, which fought with the blockading squadrons on the East Coast and the Gulf of Mexico. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer ... [click here for more] |
Long Face Games |
$4.04
|
Thinking about our players, Voxelhouse is introducing a line of products with more competitive prices: the combosets. These are small thematic sets focused on our gaming systems such as Iron Cross and Hotwar. These combo are themed around factories They include:
Generic - https://www.wargamevault.com/product/420439/Generic-Factories
Modular Factory - https://www.wargamevault.com/product/415825/Modular-Factory ... [click here for more] |
Voxelhouse |
$4.99 $4.29
|
Ogre Miniature not included, only for size comparision
Civilian Buildings set for your sci-fi distopic wargame table. Scale 1/300. Fit for games like Ogre, Battletech and others. 3d files for SLA Printers. This set contains:
- Bunker
- Power Plant
- Tower
Take a look at our products! ... [click here for more] |
Voxelhouse |
$1.99
|
Ogre Miniature not included, only for size comparision
Power Plant set for your sci-fi distopic wargame table. Scale 1/300. Fit for games like Ogre, Battletech and others. For SLA, the Printers. This set contains:
- 2 Administrative Buildings
- Nuclear Plant
- Coal Plant
- 3 Warehouses
- 2 type of Oil tanks
- Cooling Unit
Take a look at our products! ... [click here for more] |
Voxelhouse |
$3.49
|
An STL file representing the Confederate sidewheel gunboat CSS Webb. She served as a ram with the Confederate army until commissioned into the Confederate States Navy in 1865. She was destroyed by her crew to avoid capture later that year The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
A 3D model file representing the Union “Merrimack” class turret ship USS Roanoke. She was the half-sister to the Confederate CSS Virginia. Converted in 1863 she was the first Union warship with three rotating turrets. The model is scaled to 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
V2 Launching site 3d files for your SLA and FDM printer! For your wargame table. This set contains:
- A central bunker
-v2 bunkers
- workshops
- launchpads
- radar
Stay tunned! We´ll release the new Hotwar edition for 2022 Christmas!
Look at Iron Cross products here!
... [click here for more] |
Voxelhouse |
$2.29 $1.99
|
A set of STL files representing the John Ericsson class of ironclad monitors. Four ships were built for Sweden and one for the Kingdom of Norway. Three variants are included, featuring two arrangements of hurricane deck and boat stowage, the third fully cleared for action.. The models are scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
An STL file representing the Union gunboat Sachem. She was present at the battle of New Orleans, in the attack on Galveston, and later with Porter’s fleet at the siege of Vicksburg. The model is scaled to 1/600 and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.04
|
Log In 
