| Title |
Publisher |
Price |
3D PRINTER MINIATURES ARE HERE! This set features .stl files for five different 28mm scale lizardfolk miniatures, all designed to print as-is without additional printing supports and minimal cleanup (each miniature in the photo had less than 1 minute of trimwork done, mainly stringing.) The best part about 3D .stl minis is once you buy the set, you can print massive armies and never... [click here for more] |
Fat Dragon Games |
$4.99
|
3D PRINTER MINIATURES ARE HERE! This set features .stl files for five different 28mm scale orc miniatures, all designed to print as-is without additional printing supports and minimal cleanup (each miniature in the photo had less than 1 minute of trimwork done, mainly stringing.) The best part about 3D .stl minis is once you buy the set, you can print massive armies and never run out... [click here for more] |
Fat Dragon Games |
$4.99
|
1930’s Rural Gas Station
1/64th scale
While surfing the web I found a photo of an old abandoned service station on Shorpy.com. I was so taken with it – it looked like some place Bonny and Clyde might have robbed before they met their end –I had to do a model of it. I just loved those old see through pumps and the forlorn look of the place.
Reviresco’s... [click here for more] |
Reviresco tin-soldier.com |
$7.50 $4.00
|
You will get all files to print this Building. This Building is modular and has more as one ground-floor, floor and roof (see below). You can build more as 4 different buildings with this parts. Perfect for build a small german village (example for WWII).
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are... [click here for more] |
ESLO |
$19.95 $15.95
|
Data Targets are a set of science fiction miniatures objective markers for 3D printing. They have been designed for Corvus Belli's Infinity and its Infinity Tournament System (ITS) mission pack, but work well for Games Workshop's Warhammer 40,000 and a wide range of other games.
UPDATES
2017/06/12: There are a few changes... [click here for more] |
Rocketship Games |
$4.00
|
HAUNTED GARAGE
THE LAST PLACE YOU WILL EVER STOP FOR GAS
Great for Zombie and other RPG games, dioramas, and model railroads. Paper kit from Reviresco 10.5 L x 8 W x 6 H inches (1/64 scale) Includes: building, service island, vintage signs, 2 gas pumps, oil rack and cans, six drums, and Coke machine.(vehicle sold separately) ... [click here for more] |
Reviresco tin-soldier.com |
$10.00 $5.00
|
In the late 19th Century, few of those who read Jules Verne’s exciting tale of the search for the Submarine Nautilus understood that it was more than just an entertaining fiction. Much of the true story was suppressed by the authorities. Professor Aronnax was in fact an agent of the French Government. By means of the secrets he carried away when the Professor and his party escaped from the Nautilus... [click here for more] |
Reviresco tin-soldier.com |
$7.00 $4.00
|
The FATE VSF3
A Victorian Science Fiction Submarine Kit
15” long x 4” wide x 4” high
Once the depredations of the mysterious Captain Nemo and his pirate submarine became public, the seafaring nations of the world went submarine crazy. The Fate Armaments Company of West Grudger New York began to prepare a submarine vessel of their own.
The first of the... [click here for more] |
Reviresco tin-soldier.com |
$5.00 $3.00
|
Space Ship X-24 1/64th scale
A fun 1950’s décor piece or use with 28mm figures to play Buck Rodgers or Flash Gorden type space games. This colorful and easy to build space ship will carry your characters through the void with the speed of imagination; its streamlined hull slipping easily through the atmospheres of alien worlds as they pursue their never ending quest... [click here for more] |
Reviresco tin-soldier.com |
$8.00 $4.50
|
Fate Aerial Torpedo 1/64th Scale
Utilizing the now famous Fate bumblebee vibrating wing effect, the Fate Torpedo flies in defiance of contemporary science's understanding of aerodynamics. Powered by superheated steam from the patented Fate flash boiler, the Fate Aerial Torpedo is capable of flight speeds in excess of 60 miles per hour. With a range of over 50 nautical miles,... [click here for more] |
Reviresco tin-soldier.com |
$7.00 $2.50
|
The Legend of the Ghost Car
Dimly glowing headlights cutting through the foggy night on a twisting mountain road, an antique limousine rushing toward you at break neck speed, you pull your truck as far off the side of the narrow roadway as you can. Soundlessly a silvery grey car flies past, seemingly missing you only by inches. You grip the wheel with white knuckles for the driver... [click here for more] |
Reviresco tin-soldier.com |
$5.50 $3.00
|
This pack contains eight printable STL files to create stylized weapons and accessories for 15mm Science Fiction infantry figures. They are scaled for and compatible with many of the miniatures released by various manufacturers, arranged on sprues of 5 identical pieces, and work best with ‘large’ 15mm/18mm figures.
... [click here for more] |
Legionnaire Games |
$4.95
|
This pack contains 13 printable STL files to create bases and movement trays for 15mm miniatures. Included base sizes are 15x2mm and 20x2mm; movement trays can accommodate 2, 3, 4, and 5 figures mounted on their respective 15mm or 20mm bases. All bases and trays contain recesses for optionally installing rare earth magnets to keep figures securely mounted to movement trays during gaming sessions.
... [click here for more] |
Legionnaire Games |
$4.95
|
This set contains 46 .STL files you can use to print 8 unadorned and 38 uniquely detailed miniatures bases, suitable for some 15mm and most 28mm figures in modern, pulp/horror and sci-fi genres.
Included in this set are files to create:
blank round bases in 25mm, 32mm, 40mm, 50mm and 60mm diameters
one 60x35mm blank oval base
one 70x25mm blank cavalry/bike base
one 120x94mm blank large creature/flyer... [click here for more] |
Legionnaire Games |
$9.95
|
World War Tesla™ is a 15mm scale alternate-history wargame by James M. Ward (author of TSR's Gamma World, Deities & Demigods, and Metamorphis Alpha) and Thomas A. Tullis, where Nikola Tesla’s more radical ideas such as death rays and force fields have come to fruition, changing the face of a world at war. Giant walking tanks, soldiers with rocket-packs, and flying machines... [click here for more] |
Fat Dragon Games |
FREE
|
You will get all files to print this ship.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
frontsail_2half_fix.stl
mainsail_2half_fix.stl
roman_tower_fix.stl
ruder_backside_fix.stl
ruder_fix.stl
thieme_back_fix.stl
thieme_backud_fix.stl
thieme_front_fix.stl
thieme_frontud_fix.stl
thieme_middle1_fix.stl
thieme_middle2_fix.stl
thieme_middleud_fix.stl
trimere_house_fix.stl
Minimum... [click here for more] |
ESLO |
$18.45 $15.95
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
sheft_fix..stl
chair_fix.jpg.stl
table_fix.stl
wandrobe_fix.stl
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale... [click here for more] |
ESLO |
$7.45 $6.95
|
You will get all files to print this ship (2 Versions a open ship and a closed)
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
details_fix.stl
jpnlcvp_fix_2.stl
jpnlcvp_fix_2.stl
jpnlcvp_fix_3.stl
jpnlcvp_fix_open_1.stl
jpnlcvp_fix_open_2.stl
jpnlcvp_fix_open_3.stl
Minimum... [click here for more] |
ESLO |
$17.45 $14.95
|
You will get all files to print this ship (2 Versions a open ship and a closed)
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
2xmg_fix.stl
uslandingcraft_closed_back_fix.stl
uslandingcraft_closed_fix.stl
uslandingcraft_closed_front_fix.stl
uslandingcraft_open_back_fix.stl
uslandingcraft_open_fix.stl
uslandingcraft_open_front_fix.stl
Minimum... [click here for more] |
ESLO |
$17.45 $14.95
|
You will get all files to print this ship.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
cabin_fix.stl
tugboat_back_fix.stl
tugboat_front_fix.stl
tugboat_middle_fix.stl
tugboat_roof_fix.stl
tugboat_top_fix.stl
Minimum... [click here for more] |
ESLO |
$17.45 $14.95
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
You will get all files to print many different Bases in Rock/StoneDesign. Delivered in downloadable .stl file format for your 3D Home printer.
This set include: Minimum of 5-10 different designs in small sizes bases (20, 25,30 & 32mm Bases) Minimum of 2-3 different designs... [click here for more] |
ESLO |
$15.95 $14.95
|
4 bases for flying minitures -STL files- 3D print model
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
flying_column_32mm.stl
flying_column_40x40mm.stl
flying_tree_50x50mm.stl
flying_tree_60mm.stl
Perfect for your miniatures!
Minimum printbed needed is 10 x 10 cm and 10 cm high.... [click here for more] |
ESLO |
$5.95 $4.95
|
Model can printed with cabin. It Comes with fishing net or without.
You will get all files to print this ship.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
cabin_fix.stl
fishingboat_back_fix.stl
fisherboat_front_fix.stl
fisherboat_middle1_fix.stl
fisherboat_middle2_fix.stl
fisherboat_toppart_2half_fix.stl
fisherboat_toppart_fix.stl
fisherboat_toppart_woutfishnet_fix_left.stl
... [click here for more] |
ESLO |
$17.45 $14.95
|
This model can you also print as miniature scenery or for your fish tank (Please use PETG).
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
wrack_big_fix.stl
wrack_part1_fix.stl
wrack_part2_fix.stl
Minimum printbed needed is 15 x 15 cm and... [click here for more] |
ESLO |
$10.95 $6.95
|
THE ERA OF 3D PRINTABLE WARGAMES IS HERE!
World War Tesla™ is a 15mm scale alternate-history wargame by James M. Ward (author of TSR's Gamma World, Deities & Demigods, and Metamorphis Alpha) and Thomas A. Tullis, where Nikola Tesla’s more radical ideas such as death rays and force fields have come to fruition, changing the face of a world at war.... [click here for more] |
Fat Dragon Games |
$19.99
|
With an Empire and trade commitments that spanned the entire globe, the Royal Navy had a clear need for small, light cruisers that could be produced in large numbers. Though displacing more than their intended 6,500 tons, the Leander-class fulfilled this requirement admirably. Perhaps the most famous examples of this class were the Ajax and Achilles which, together with a cruiser... [click here for more] |
Mongoose |
$9.99
|
More correctly called the Afridi-class, this destroyer began the tradition of gunnery over torpedoes. However, the class had a frightening lack of anti-aircraft defences, especially against dive-bombers. The Tribal destroyers were the Royal Navy’s most advanced escorts of the time, and saw action in nearly every theatre. ... [click here for more] |
Mongoose |
$9.99
|
A product of the Washington Treaty that restricted the number of vessels a navy could have above 10,000 tons, the York-class fulfilled cruiser duties required by a navy whose responsibilities stretched across the globe. The York took part in the Norwegian campaign but was later sunk by Italian motor boats in the Mediterranean. The Exeter, famously, took part in the Battle of the... [click here for more] |
Mongoose |
$9.99
|
The launch of the Deutschland class of warships marked a turning point for the Kriegsmarine and Germany as a whole. While the rest of the world followed the dictates of the Washington Treaty, these vessels broke all rules imposed on Germany. Though still relatively small in size, they were well armoured and carried the type of armament traditionally seen only on battleships. It quickly became apparent... [click here for more] |
Mongoose |
$9.99
|
The Fairmile A was designed from the outset to use prefabricated components that could be produced by small businesses such as furniture manufacturers, which would then be assembled at shipyards. Capable of 25 knots, it mounted a 3 pounder gun and a pair of .303 machine guns, as well as depth charges. ... [click here for more] |
Mongoose |
$9.99
|
Designed with the form of a destroyer’s hull, the Fairmile B (like its predecessor, the Fairmile A) was intended primarily as a submarine-chaser, and so was fitted with ASDIC and depth charges. Manufactured in large numbers, the Fairmile B was also famously used on the raid on St. Nazaire. ... [click here for more] |
Mongoose |
$9.99
|
Capable of 26 knots, the Fairmile C was a motor gun boat, mounting two two pounders and eight machine guns of various calibres. It was mainly used for close escort duties and some clandestine missions. ... [click here for more] |
Mongoose |
$9.99
|
Nicknamed ‘Dog Boat,’ the Fairmile D was highly adaptable and could be fitted with a range of armament that meant it could act as both motor gun and torpedo boat. Some were used by the Royal Air Force for long-range rescue of downed airmen. ... [click here for more] |
Mongoose |
$9.99
|
With an Empire and trade commitments that spanned the entire globe, the Royal Navy had a clear need for small, light cruisers that could be produced in large numbers. Though displacing more than their intended 6,500 tons, the Leander-class fulfilled this requirement admirably. Perhaps the most famous examples of this class were the Ajax and Achilles which, together with a cruiser... [click here for more] |
Mongoose |
$9.99
|
More correctly called the Afridi-class, this destroyer began the tradition of gunnery over torpedoes. However, the class had a frightening lack of anti-aircraft defences, especially against dive-bombers. The Tribal destroyers were the Royal Navy’s most advanced escorts of the time, and saw action in nearly every theatre. ... [click here for more] |
Mongoose |
$7.99
|
With an Empire and trade commitments that spanned the entire globe, the Royal Navy had a clear need for small, light cruisers that could be produced in large numbers. Though displacing more than their intended 6,500 tons, the Leander-class fulfilled this requirement admirably. HMS Neptune was the first British ship to spot the Italian fleet in the battle of Calabria, during which she damaged the heavy... [click here for more] |
Mongoose |
$9.99
|
With an Empire and trade commitments that spanned the entire globe, the Royal Navy had a clear need for small, light cruisers that could be produced in large numbers. Though displacing more than their intended 6,500 tons, the Leander-class fulfilled this requirement admirably. ... [click here for more] |
Mongoose |
$9.99
|
A product of the Washington Treaty that restricted the number of vessels a navy could have above 10,000 tons, the York-class fulfilled cruiser duties required by a navy whose responsibilities stretched across the globe. The York took part in the Norwegian campaign but was later sunk by Italian motor boats in the Mediterranean. ... [click here for more] |
Mongoose |
$9.99
|
The Olgun MAUL (Military and Utility Labour) is a favoured mech of the confederation forces. It's squat silhouette and sensor arms give it good stealth and cover abilities while the forearm weapon mounts, underarm grenade launchers and shoulder mounted rocket pods make it a versatile unit on the field. With the addition of the right shoulder mount the Olgun is capable of taking on a number of different... [click here for more] |
Broken Tower |
$15.00
|
Here is a free sample of our upcoming 3D printable scenery range for Wargames and RPG.
You'll find enclosed stl files to print the model on any 3D printer.
This is a multi part model in 28mm scale that needs assembly as follow :
The recommended settings are for PLA printing on any entry level 3D printer, adapt as needed to your printer .
100 or 150 microns layer height
5% to 15% percent... [click here for more] |
Via Ludibunda |
Pay What You Want
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print 4 different houses, just load them in the software provided with your 3D printer and print them as many times as you like !
The STL files are printable on any 3D printer, we recommend using... [click here for more] |
Via Ludibunda |
$27.99
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print 4 different houses, just load them in the software provided with your 3D printer and print them as many times as you like !
You can mix and match some parts with the designs from the Village... [click here for more] |
Via Ludibunda |
$27.99
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print some Drow or Dark Elves buildings just load them in the software provided with your 3D printer and print them as many times as you like !
The STL files are printable on any 3D printer, we... [click here for more] |
Via Ludibunda |
$29.99
|
The Alien Pod... a menacing addition to your scenery, filling your PCs with foreboding, or providing your enemies squads with reasons not to shoot in your direction. The Pod comes with a tendril base, modelled to have little podlets growing from its ropey growth and can be re-sized to represent alien flora, biomechincal drop ships, spores and of course eggs containing alien life froms.
This product... [click here for more] |
Arid Hills Gaming |
$5.00
|
The Steampunk Modular Scenery Set contains models which snap together using the OpenLOCK system allowing you to rapidly build large, flexible layouts for your skirmish, wargaming or role playing endeavours. These 3D models can be re-printed over and over to give you as extensive a collection as you want - and you don't have to worry about printing models that you don't actually want. Print what you... [click here for more] |
Arid Hills Gaming |
$15.00
|
Expand your Starship deck plans with these Airlock pieces, including two door types, frames, and a self-contained airlock template suitable for use with 28-32mm miniatures.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these products, available from Printable Scenery. These tiles are commercially... [click here for more] |
2nd Dynasty |
$7.99
|
Create your own battlemover, suitable for your Sci-Fi rpg or tabletop wargame! The battlemover could be a giant robot tank, or scaled down to build security droids.
The model is fully articulated for easier printing and posing. The parts snap together for glueless assembly. Suitable for use with 28-32mm miniatures. These tiles are commercially available versions of 2nd Dynasty's 2017 Starship Kickstarter.... [click here for more] |
2nd Dynasty |
$14.99
|
This is the STL file for 3D printing a a Constar Arrow light space fighter and its flight stand.
These files were developed during the Star Eagles kickstarter. ... [click here for more] |
Ganesha Games |
$3.50
|
You will get all files to print this ship. Delivered in downloadable .stl file format for your 3D Home printer.
This parts are included:
3xmast_fix.stl
3x_pole_moust_fix.stl
big_sail_fix.stl
pole_mount_fix.stl
pinacce_front_1_fix.stl
pinacce_front_1_fix_2parts.stl
pinacce_front_2_fix.stl
pinacce_middle_fix.stl
rigging2_2parts_fix.stl
rigging2_fix.stl
rigging_fix.stl
ropeholder_fix.stl
shipwheel_fix.stl
shipwheel_holder_fix.stl
small_sail_fix.stl
Minimum... [click here for more] |
ESLO |
$18.45 $15.95
|
This is a 3D printable evil tree monster based on a model I made to portray Wintersplinter from the D&D 5e module Curse of Strahd, but it can be used to portray any ambulatory tree of malign disposition, and you can even splice the print at the top of the legs if you want a non-ambulatory version.
Printing Recommendations
I recommend you print this using 4-6 top, outside and... [click here for more] |
2nd Dynasty |
$4.99
|
Log In 
