Red Line = Cut Black Line = EngravingThis file contains AI and SVG formats for laser cutting.For 2.5mm mdfIf you want them in physical form, follow us and write to us:Follow us!
... [click here for more]
I created files in Lightburn to cut a Battle Tech Alpha Strike Battlefield Support tracker with your laser cutter in 3mm MDF wood. Cut the two pieces and then just glue together with wood glue. For added effect cover the front with a polyurethane from home depot and "bam" you have he fanciest way to track your tactical strikes! Sized for 1/2 inch mini dice to fit in the holes. The whole card is... [click here for more]
Red Line = Cut Black Line = EngravingThis file contains AI and SVG formats for laser cutting.For 2.5mm mdfIf you want them in physical form, follow us and write to us:Follow us!
... [click here for more]
Thanks for the interest. This is a free SVG file containing some laser cut designs I created.
You can send these to a local laser cutting service to make (or use your own laser cutting machine, if you have one).
You may need to make some tweaks before sending them. I recommend using Inkscape because it is free.
The SVG file uses RGB Blue 255 for the cutting lines and RGB Green 255 for the Line... [click here for more]
Thanks for the interest. This is a free SVG file containing some laser cut designs I created.
You can send these to a local laser cutting service to make (or use your own laser cutting machine, if you have one).
You may need to make some tweaks before sending them to a laser cutting services (check the requirements of the service you are using). I recommend using Inkscape because it is free.
The... [click here for more]
Red Line = Cut Black Line = EngravingThis file contains AI and SVG formats for laser cutting.For 2.5mm mdfIf you want them in physical form, follow us and write to us:Follow us!
... [click here for more]
Here are some MDF files to cut out some 1 inch diameter objective tokens, for One Page Rules or any wargame! Just cut them out, glue them together and paint with some acrylic paint.
The objective starts out as white, then when someone takes the point you put a coin with the correct color. if the objective is stolen flip the coin. if it is lost remove the coin!
The files were created with lightburn,... [click here for more]
Red Line = Cut Black Line = EngravingThis file contains SVG formats for laser cutting.This content contains: 10mm, 15mm and 20mm tires.For 2.5mm mdfFollow us!
... [click here for more]