Title |
Publisher |
Price |
 A single M3E Print On Demand card. ELEMENTAL, FOUNDRY ... [click here for more] |
Wyrd Miniatures |
$0.50
|
A single M3E Print On Demand card.
Ten Thunders, Summon, Darkened, Jakob Lynch ... [click here for more] |
Wyrd Miniatures |
$0.50
|
A single M3E Print On Demand card.
This model counts as a Stitched Together.
NIGHTMARE, PUPPET
Errata: March 2020. ... [click here for more] |
Wyrd Miniatures |
$0.50
|
 A single M3E Print On Demand card.
PERFORMER, PUPPET ... [click here for more] |
Wyrd Miniatures |
$0.50
|
One shipment of the Orfeld company has been waylaid in transit across the Sea of Storms. Kardalokan corsairs have captured the cargo ship and stolen the valuables, including a prized golden statue of Tezany, the Shark God. Lord Orfeld needs four brave adventurers to bring back the statue. But is this be a run-of-the-mill recovery mission, or is some mysterious power at work?
Dark Waters is... [click here for more] |
Ganesha Games |
$2.50
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on... [click here for more] |
Dave Graffam Models |
$3.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on... [click here for more] |
Dave Graffam Models |
$3.95 $1.00
|
 A single M3E Print On Demand card. ELEMENTAL, FOUNDRY ... [click here for more] |
Wyrd Miniatures |
$0.50
|
 A single M3E Print On Demand card.
Dead Man's Hand, Resurrectionists, Summon, Necromancy, Nicodem ... [click here for more] |
Wyrd Miniatures |
$0.50
|
 A single M3E Print On Demand card. CROSSROADS, Versatile ... [click here for more] |
Wyrd Miniatures |
$0.50
|
This bundle includes a selection of 35 of my fantasy/medieval themed single-layered models in 28mm/30mm scale.
Up until now, there was no other way to get a hold of these models without going in for a whole multi-layered kit. With this bundle, you get 35 single-layered models for less than $1 each. They're ready to print right away, without involving any extra skins or textures. A great choice for... [click here for more] |
Dave Graffam Models |
$29.95
|
 A single M3E Print On Demand card.
This model counts as a Stitched Together.
NIGHTMARE, PUPPET
Errata: March 2020. ... [click here for more] |
Wyrd Miniatures |
$0.50
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on... [click here for more] |
Dave Graffam Models |
$3.95 $1.00
|
 This addition to Knyghte Pyke and Sworde is a beta test of the upcoming fantasy supplement.
Included are rules for 10 fantasy peoples, from beast folk to orcs, complete with points values.
You also receive the preliminary wizard rules and 8 spells to test out.
This expansion is a beta test, allowing you to help test upcoming features before their release. It requires a copy of Knyghte... [click here for more] |
Nordic Weasel Games |
Pay What You Want
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. It may look complicated, but every part of the Library is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the complete structure you see here.... [click here for more] |
Dave Graffam Models |
$6.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on... [click here for more] |
Dave Graffam Models |
$1.95 $1.00
|
 A single M3E Print On Demand card. ELEMENTAL, FOUNDRY ... [click here for more] |
Wyrd Miniatures |
$0.50
|
Note that the video below is for the printed version of Yaah #9, be we inserted it to give you an idea of the high-quality of the magazine and components.
What's the best thing about the arrival of spring? With the possible exception of warmer weather, it is - of course - the newest issue of Yaah! Magazine!
Yaah! #11 makes a big splash with the issue game, Strike for Berlin, designed by Brian Train.... [click here for more] |
Flying Pig Games |
$19.00 $15.00
|
These cargo bales are suitable for almost any genre. They will work for fantasy or medieval settings, military wargames from Napoleon to post-apocalypse, and almost anything from steampunk to space trucks. Cargo bales like these could be found in any zombie-infested warehouse, medieval trading village, war camp, wagon, market square or industrial park.
This paper model kit is easy to assemble,... [click here for more] |
Dave Graffam Models |
$0.95
|
This paper tile set is easy to create, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, aluminum ruler and cutting mat. For sturdier tiles, use foamcore and spray glue.
These tiles are designed with a 1" grid to be used at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
 A single M3E Print On Demand card.
This model counts as a Shikome
EMISSARY OF FATE ... [click here for more] |
Wyrd Miniatures |
$0.50
|
 A single M3E Print On Demand card.
PERFORMER ... [click here for more] |
Wyrd Miniatures |
$0.50
|
 A single M3E Print On Demand card. ELEMENTAL, FOUNDRY ... [click here for more] |
Wyrd Miniatures |
$0.50
|
One of the strengths of Nordic Weasel products is that they are written to be tinkered with.
The Variant Rules pack provides a collection of new options for your games of both Starport Scum and Dungeon Scum, ranging from the exceptionally simple to the more involved.
Inside, you will find 17 variant rules, covering everything from making the game more or less deadly, more options... [click here for more] |
Nordic Weasel Games |
$1.99
|
This paper tile set is easy to create, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, metal ruler and cutting mat. For sturdier tiles, use foamcore and spray glue.
These tiles are designed to be used at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
At long last, a PDF edition of Tusk, the widely acclaimed set of Mammoth hunting rules written by Matthew (Aeronef, Scudbusters) Hartley.
Tusk includes rules for cavemen hunting mammoths using stone age weapons, fire, dogs and also heroes called Og! The mammoths are controlled by a reaction table so Tusk makes for an excellent solo game as well as... [click here for more] |
Wessex Games |
$4.20
|
 A single M3E Print On Demand card. CROSSROADS, Versatile ... [click here for more] |
Wyrd Miniatures |
$0.50
|
 A single M3E Print On Demand card.
Neverborn, Summon, Waking Dream, The Dreamer ... [click here for more] |
Wyrd Miniatures |
$0.50
|
 A very simple set of skirmish rules for the pre gunpowder era could also be used for fantasy games.
Any individually based figures will do fine for historical clashes or alternatevly mix and match with whatever you hane available.
Designed to be quick and fun ideal for people new to wargaming. ... [click here for more] |
Terry Catton |
$1.40
|
The Devouring Dead Await!
Bash undead hordes, outwit the deadliest traps and count your resources carefully in the harshest, most murderous dungeons ever made for Four Against Darkness: the necromantic dungeons!
• Generate random necromantic dungeons for characters of any level!
• Rules for complex traps, drawbridges, balconies, levers, deathtraps, neurosis and even ruling an... [click here for more] |
Ganesha Games |
$10.00
|
What happens when five of wargaming’s most talented indie designers are teamed up with an incredible graphic artist? The answer is a unique anthology project. New rules for your favourite indie titles. New games ripped right from the minds of wargaming’s most prolific collective of published writers and insights into the process of writing and creating games. Join us for BLASTER!
BLASTER:... [click here for more] |
BLASTER |
$19.99
|

FUTURESHOCK has arrived, and with it, come brutality, mayhem and carnage, all on a single page that can be printed out, cut and turned into a tiny six-page booklet. FS is a set of incredibly simple skirmish rules for miniatures in your collection, focused on the post-apocalypse, but don't let that stop you from using it to fit whatever setting you prefer.
In FS, players create warbands of thrashers... [click here for more] |
Crushpop Productions |
$0.99
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about half an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
 A single M3E Print On Demand card. WILDFIRE, WOE ... [click here for more] |
Wyrd Miniatures |
$0.50
|
The Hunt for the Golem is a mini-campaign for Frostgrave: Fantasy Wargames in the Frozen City.
Over the course of three scenarios, the wizards and their warbands will learn about the Granite Golem, a unique monster rampaging through the ruins. They will then go on the hunt for the Golem, first to study it, then in an effort to capture or destroy it.
They will also have a chance... [click here for more] |
Osprey Publishing |
$5.00
|
 A single M3E Print On Demand card.
This model counts as Santiago Ortega.
FAMILY ... [click here for more] |
Wyrd Miniatures |
$0.50
|
Four Against The Netherworld is a supplement for Four Against the Darkness, for character levels 6-9.
In its pages you will find: New classes: Demonologist, Cambion, Cleric of Zur, Cleric of Foryos, and a reworked Paladin; A complete economic system for the Netherworld; Rules for hex-based exploration, with plenty of terrain types, and a downloadable color map of the known... [click here for more] |
Ganesha Games |
$12.00 $8.00
|
Palaeo Diet: Eat or be Eaten is a stand-alone set of gaming rules for recreating prehistoric animal hunts on your table top. The game models a time when humans were not yet in control of the world around them, when the landscape could just as easily give succour to a struggling tribe, as it could cripple a thriving people.
Designed with solo and multiplayer... [click here for more] |
Ganesha Games |
$10.00
|
 A single M3E Print On Demand card.
Bayou ... [click here for more] |
Wyrd Miniatures |
$0.50
|

The monstrous children of Loki, the Mischief-Maker, strain against their bonds, and writhe and twist and plot to end the rule of the gods. Ragnarök, the destruction of the gods and all of the Nine Realms is coming. It is merely a question of when, and for how long it can be held off.
Based on the highly acclaimed Four Against Darkness series of RPG-lite dungeon delving adventures... [click here for more] |
Ganesha Games |
$12.99 $8.00
|
 A single M3E Print On Demand card.
GUARD ... [click here for more] |
Wyrd Miniatures |
$0.50
|
Welcome to the Scummer:
A collection of gaming content for both Starport Scum and Dungeon Scum.
The focus of this pack is to add new gaming content: Ideas and gadgets that can be put right on to your gaming table.
Included are:
*3 new magical treasures for Dungeon Scum.
*3 new technological gadgets for Starport Scum.
*A new Job for Starport Scum.
*Totally-not-Jedi powers for Starport... [click here for more] |
Nordic Weasel Games |
$1.99
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice for... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
 A single M3E Print On Demand card.
Bayou ... [click here for more] |
Wyrd Miniatures |
$0.50
|
KNIGHT OF DESTINY PDF
Knight of Destiny is an Arthurian adventure for a single character, a questing paladin, using the Four Against Darkness rules. Your character can also hire retainers along the way, enlisting men-at-arms, merchants, and other travellers to help him in his quest for the Grail.
The Kingdom is in decay. Lancelot has left and King Arthur has fallen ill. Traitor... [click here for more] |
Ganesha Games |
$2.00
|
Shieldwall is a fast play set of fantasy mass combat rules. Designed for print-and-play, Shieldwall is an easy to learn and teach system that you can utilize for any collection of miniatures. A 17 page pdf includes:
- Rules for creating an army.
- Six scenarios that can be played alone or as campaigns.
- Print-and-Play deck of Special Event Cards.
- A complete magic system.... [click here for more] |
Chris Walton |
$15.00
|
This paper model kit is easy to assemble, requiring just 6 or 7 cardstock paper sheets to print on (110 lb. or 199gsm matte stock recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. For better results, a foamcore base can be used.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
 Imperial Skies is a Miniature battle game for lighter than air ships. There is a range of miniatures availible from Brigade Models in the UK, which cover many nation airships. Statistics are provided in the book for all models they produce as of September 2016. Future releases by Brigade models will be supported with additional statistic cards. This game is supported and sold by Brigade Models out... [click here for more] |
Rottenlead Publishing |
$17.00
|
 A single M3E Print On Demand card.
TRI-CHI ... [click here for more] |
Wyrd Miniatures |
$0.50
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on... [click here for more] |
Dave Graffam Models |
$1.95 $1.00
|