| Title |
Publisher |
Price |
A set of 3D model STL files representing the New York ferry “Hunchback” as she was in service with the Union Navy. The model is also representative of other ferry gunboats. Three models are included, representing her armament as initially converted, in 1863 and 1865, A fourth model has no armament fitted for those who prefer to add their own guns. The models are scaled at 1/600, and print well... [click here for more] |
Long Face Games |
$4.90
|
Dawn of Iron: The American Civil War at Sea, is a game of naval combat, set during American Civil War (1861-1865). While many think of the war’s naval campaigns as a static blockade, the truth is that it was actually just as desperate and bloody as other aspects of the conflict. From the coastal regions of Virginia and the muddy rivers of the Mississippi Valley to the... [click here for more] |
Scary Biscuits Studios |
$19.00 $9.00
|
This book builds on the earlier Portable Wargame rules for fighting battles during the so-called ‘ironclad’ era of naval warfare that were included in ‘The Gridded Naval Wargame’. In this book, the author has created a set of rules that are mainly aimed at the American Civil War, a war that saw both sides embrace the new concept of armouring warships to make them less vulnerable to the more... [click here for more] |
Eglinton Books |
$6.11
|
A 3D model STL file of the Union casemate river ironclad Lafayette. The ship was one of the largest Union riverine warships to serve on the Mississippi and\ saw constant action from early 1863 until the end of the war. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.67
|
Dawn of Iron: Battle of Wassaw Sound Battle Pack
The attached battle pack expansion covers the short career of the CSS Atlanta in Georgian waters in 1863. The history and ships include the Battle of Wassaw Sound, where the rebel ram faced off against the powerful monitors, USS Weehawken and Nahant. Inside you will find:
History & Maps of the Battle (5pgs)
1x Historical Scenario
1x... [click here for more] |
Scary Biscuits Studios |
$7.50 $6.00
|
A 3D model STL file of the Union sidewheel gunboat Water Witch. The ship was commissioned into the US Navy in 1853 and was captured by Confederate forces in 1864. The model is based upon the replica ship that was constructed at the National Civil War Naval Museum in Columbus Georgia. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.67
|
Dawn of Iron: War of the Pacific (1879-1884)
This Dawn of Iron battle pack expansion takes you just beyond the American Civil War into a historically adjacent conflict in South America involving ironclads and wooden ships. The War of the Pacific primarily involved Peru and Chile as they battled for naval supremacy over valuable guano/nitrate reserves along... [click here for more] |
Scary Biscuits Studios |
$20.00 $15.00
|
Dawn of Iron - First Anthology
This 104-page anthology is a collection of all of this battlepacks and rules pubished for Dawn of Iron to date. If your either an old salt or fresh off a receiving boat, this anthology has a lot to offer.
This Anthology includes remastered content that was previously released:
Dawn of War: Rulebook
The Battle of... [click here for more] |
Scary Biscuits Studios |
$40.00 $30.00
|
It's early on July 1st, 1863, and Union Brigadier General John Buford’s 1st Reserve Cavalry Division is deployed to the west of the town of Gettysburg battling unidentified Confederate infantry advancing on the town. All morning long, the men in gray have pressured the Union cavalry. Help finally arrives in the form of I Corps commander Major Gen. John Reynolds. He rides up to the Lutheran Seminary,... [click here for more] |
Flying Pig Games |
$25.00 $22.00
|
This pack includes cards for all of the mini cards that you need for your Dawn of Iron game and more!
Inside, you will find:
30x Cumulative Damage Cards
30x Critical Damage Cards
11x Orders Cards
51x Upgrade Cards
All cards are US Mini-card size, measuring roughly 1.625"x2.5" (41.6x63.5mm) ... [click here for more] |
Scary Biscuits Studios |
$20.00
|
This is the second, additional, album dedicated to the American Civil War 1861-1865. The characters in this album will allow you to form special units or decorate your main units with new banners. ... [click here for more] |
Vyacheslav Batalov |
$10.00
|
This pack includes cards for all of the ships listed in the Dawn of Iron: First Anthology.
Inside, you will find:
91x Ship Cards (25x Confederate and 66x Union)
6x Fortification Cards
2x Damage Table/Quick Reference Cards
2x Orders Reference Cards
All cards are Tarot size, measuring roughly 4.75"x2.75" (121x70mm) ... [click here for more] |
Scary Biscuits Studios |
$30.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Village Chapel is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into... [click here for more] |
Dave Graffam Models |
$4.95
|
A set of 3D model files covering the Miantonomoh class double turreted monitors. Three models are included, Monadnock depicting the first three of the class in normal service, Miantonomoh with added hurricane deck and bulwark for duties in the open sea, and Tonawanda, the last ship of the class built to a modified design. The models are scaled at 1/600, and print well at 1/1200 ... [click here for more] |
Long Face Games |
$4.90
|
Altar of Freedom is a "big battle" game, where you step into the boots of an American Civil War corps or army general, commanding your army at the grand tactical level. The rules are designed to play the largest battles of the war, like Antietam or Chickamauga, in a single evening with multiple players. The smallest tactical unit is a brigade, and your task will be coordinating... [click here for more] |
Greg Wagman |
$15.00
|
Can't find a tabletop wargame opponent? This easily-readable guide provides the tools needed to undertake tabletop wargame campaigns without the need for other players. The guidelines presented within are designed to supplement your favorite wargaming rules set (not included). They can be bent or twisted, even broken and reformed, to suit a wargamer's needs. Novices and veterans alike can employ... [click here for more] |
Precis Intermedia |
$6.95
|
Battles of Plum Point Bend and Memphis Battle Pack
The attached battle pack expansion covers the intense Battles of Plum Point Bend and Memphis in 1862. Inside you will find:
History & Maps of the Battles (8pgs)
2x Historical Scenarios (one each for Plum Point Bend and Memphis)
1x General Play Mission (inspired by the battles)
21x Ship Cards (covering all of the major ships in... [click here for more] |
Scary Biscuits Studios |
$10.00
|
A 3D model STL file of the Confederate sidewheel casemate ironclad Baltic. The ship operated on Mobile Bay and on the Tombigbee River until she was dismantled in 1864. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.67
|
A 3D model file of the Confederate casemate ironclad Louisiana, built at New Orleans to defend the Mississippi river. Three variants are included; her initial configuration, the ship as armed at the battle of April 24th 1862, and a third with her full armament. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$4.90
|
Heavily influenced by his popular A Most Fearful Sacrifice, Herm Luttmann’s Shattered Union series is a new line of American Civil War wargames designed to be accessible to gamers of any experience level. The series aims to provide not only a playable wargame experience in about three hours, but also to produce a realistic simulation of a 19th Century battlefield. The Hill of... [click here for more] |
Tiny Battle Publishing |
$15.00 $12.00
|
Dawn of Iron: That Devil, the Arkansas Battle Pack
The attached battle pack expansion covers the successful career of the CSS Arkansas on the waters of the Mississippi River in 1862. The history and ships includes both the first duel with the USS Carondelet and Tyler on the Old River, and the Arkansas' daring run past the Union fleet outside Vicksburg. Inside you will find:
History... [click here for more] |
Scary Biscuits Studios |
$14.00 $7.50
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Assembly time is about an hour for the whole set.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm,... [click here for more] |
Dave Graffam Models |
$1.95
|
Dawn of Iron: Damn the Torpedoes! Battle of Mobile Bay Battle Pack
This Dawn of Iron battle pack expansion covers Admiral Farragut's brilliantly successful assault on Mobile Bay, Alabama in August 1864. The history and ships include the battle, where Farragut's wooden ships and monitors clashed with the most powerful Confederate ironclad ram ever built, the CSS Tennessee.
Inside... [click here for more] |
Scary Biscuits Studios |
$15.00 $12.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. It may look complicated, but every part of the Country Brewery is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the... [click here for more] |
Dave Graffam Models |
$3.95
|
A 3D model STL file of the Confederate gunboat Chattahoochee, whose remains are on display at the National Civil War Naval Museum in Columbus, Georgia. The ship operated on the river whose name she bore until she was destroyed in a boiler explosion in 1863. The model is scaled at 1/600, and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.67
|
Dawn of Iron: Battle of Albemarle Sound Battle Pack
The attached battle pack expansion covers the successful career of the CSS Albemarle in North Carolinian waters in 1864. The history and ships include both the battles of Plymouth and the Albemarle Sound, where the rebel ram acquitted herself well against the valiant, but vulnerable, Union blockade vessels. Inside you will find:... [click here for more] |
Scary Biscuits Studios |
$9.00 $7.50
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Inventor's House is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into... [click here for more] |
Dave Graffam Models |
$3.95
|
Three 3D model files representing generic blockade runners of the American Civil War. |Two is in original Confederate configuration, the third is armed to represent a vessel captured by the Union and pressed into service as a gunboat. The STL files are scaled for 1/600. Set your slicer at 50% for 1/1200 ... [click here for more] |
Long Face Games |
$4.90 $3.67
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to... [click here for more] |
Dave Graffam Models |
$2.95
|
This book follows on from ‘The Portable Wargame’ and ‘Developing The Portable Wargame’ to cover naval wargames that can be fought on a gridded tabletop. The book contains six sets of rules (three of which are from the ‘Portable Naval Wargame’ stable), four explanatory battle reports, and a chapter that explains ‘How to …’ build simple model American Civil War ironclads. Aimed mainly... [click here for more] |
Eglinton Books |
$4.90
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model set is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$1.95
|
Easy to build at 15mm to 30mm scale: This paper model is easy to assemble, requiring just cardstock sheets to print on (110# or 199gsm cardstock recommended), scissors, hobby knife and ordinary glue. Included are tips and advice for printing at various popular gaming and model railroad scales. One of the great things about papercraft models is that they can be printed at any popular... [click here for more] |
Dave Graffam Models |
$1.95
|
Dawn of Iron: Battle of Cherbourg Battle Pack
The attached battle pack expansion covers the famous duel between the USS Kearsarge and CSS Alabama at the Battle of Cherbourg in 1864. Inside you will find:
History & Maps of the Battle (3pgs)
1x Historical Scenario
1x General Play Mission (inspired by the battle)
4x Ship Cards (Including the CSS Alambama and her predacesor CSS... [click here for more] |
Scary Biscuits Studios |
$7.00
|
Horse & Musket rules are designed to fight skirmishes during the black powder era.
This rulebook is extremely versatile because it easily covers many conflicts of the 18th and early 19th century; from Napoleonics to the War of Spanish Succession, and covers the wars in America: French Indian War, American War of Independence, War of 1812 and the American Civil War.
This 2nd edition brings... [click here for more] |
Wiley Games |
$9.99
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Optionally, you can use a piece of foamcore for the base.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk... [click here for more] |
Dave Graffam Models |
$1.95
|
Special Ops is Multi-Man Publishing's magazine that provides coverage of MMP's line of products. Each issue has multiple articles covering several of MMP's product lines as well as ASL/ASLSK scenarios.
These are just the magazines, no game is included in the PDF version (only the physical print edition includes the game).
Articles for this issue:
INTERNATIONAL... [click here for more] |
Multi-Man Publishing |
$6.00
|
Easy to build: This paper model kit is easy to assemble, requiring just 8 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$2.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is under an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$1.95
|
All Quiet on the Potomac is the Eastern Theater scenario supplement for Altar of Freedom. This massive PDF covers every major battle fought in the east from 1861-1865. Each scenario has been carefully researched to include color maps and proper orders of battle for the armies.
Historical scenarios include: First Manassas, Seven Pines, Gaines Mill, Glendale, Malvern... [click here for more] |
Greg Wagman |
$15.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$1.95
|
A 3D model file representing the Royal Navy's steam gunboat HMS Amethyst. One of a class of six ships, HMS Amethyst fought with HMS Shah against the Peruvian ironclad Huascar when she had been commandeered by anti government rebels. The model is scaled at 1/600. Two variant hulls are included, representing the two batches of ships. ... [click here for more] |
Long Face Games |
$3.67
|
Special Ops is Multi-Man Publishing's magazine that provides coverage of MMP's line of products. Each issue has multiple articles covering several of MMP's product lines as well as ASL/ASLSK scenarios.
These are just the magazines, no game is included in the PDF version (only the physical print edition includes the game).
Articles for this issue:
PERHAPS... [click here for more] |
Multi-Man Publishing |
$6.00
|
Fire & Movement: The Forum of Conflict Simulation was founded in 1976 by Rodger MacGowan and published by Diverse Talents, Inc. The rights and publishing of F&M currently reside with Decision Games and Past Into Print is the official creator and publisher of the electronic versions of this original print magazine.
F&M was published until 2005 and consists of 150 issues. It focused... [click here for more] |
Past Into Print |
$5.99
|
Easy to build: This paper model kit is easy to assemble, requiring just 5 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$2.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you can use a piece of foamcore for the base. A fine-line ink marker is recommended for darkening the paper edges, and foamcore is recommended for the ground piece, and... [click here for more] |
Dave Graffam Models |
$2.95
|
A crane house like this is useful in any harbor, and might be the property of a merchant at their private pier or warehouse. It might be owned by a town or individual offering its services to the public, charging a small fee for every hoist. Such a structure would also be vital in an exchange market where bulk goods are being traded, where large freight needs to be moved from one wagon to another... [click here for more] |
Dave Graffam Models |
$1.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$1.95
|
This album contains basic characters for the skirmish army of the North or the South. While working on the album, I relied on Mercy's "Rebels and Patriots" rules. Both armies in the album are arranged symmetrically so that both players - North and South - have equal opportunities to complete their units. Of course, figures can be used in the game according to other rules. ... [click here for more] |
Vyacheslav Batalov |
$20.00
|
Easy to build: This paper model kit is easy to assemble, requiring just 7 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$2.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.
15mm to 30mm scale: This model set is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting... [click here for more] |
Dave Graffam Models |
$1.95
|
Log In 
