|
 |
|
|
|
|
 |
Newest Titles in This Section
|
 |
Products found in this section... |
Sort by:
|
Title |
Publisher |
Price |
 Embark on an immersive journey through the illustrious Napoleonic Era with our unparalleled collection of Top Down miniatures, meticulously designed to elevate your wargaming campaigns with unmatched speed and affordability.
Perfectly suited for large-scale battles, each miniature represents a scalable unit, meticulously scaled at approximately 1:300, with bases measuring 15mm x 25mm.
Contains... [click here for more] |
Witwise Wargames |
$12.99 $7.99
|
The Third Portable Wargame Compendium has been compiled and edited by Bob Cordery, and contains contributions from Archduke Piccolo, Bob Cordery, Mark Cordone, Arthur Harman, Nick Huband, Paul Leeson, Mike Lewis and Professor Gary Sheffield.
This is the third Portable Wargame Compendium, and it contains the following:
Modifications to the Ancients rules in Developing the Portable Wargame for fighting... [click here for more] |
Eglinton Books |
$12.16
|
The Portable Wargame concept has been evolving since the first book was published in 2017, and a lively community of players has developed. These players share ideas and their own variants of the rules, and this led to the publication of a selection of them in 2022 in the Portable Wargame Compendium. This proved so successful that a second Compendium has now been compiled.
This is the second Portable... [click here for more] |
Eglinton Books |
$7.22
|
The Napoleonic Wars consisted of a range of conflicts, from 1804 to 1815, fought between the First French Empire under Napoleon and a changing mix of European coalitions. This game focuses on a part of the Napoleonic Wars called the Peninsular War, which took place in the Iberian Peninsula, mostly between the Spanish, Portuguese and British armies on the one hand and the First French Empire army on... [click here for more] |
Mike Lambo |
$22.99 $14.99
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Village Chapel is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into... [click here for more] |
Dave Graffam Models |
$5.95
|
 "Vive L'Empereur!" is a solitaire hex and counter wargame depicting the decisive Battle of Waterloo on June 18, 1815. Can you overcome the Anglo-Allied Army under Wellington and Prussian Army under Blucher to renew French domination of Europe?
The game can be played with 1-2 players. Game time is 90-180 minutes long. It is compatible with the Solitaire game system.
Vive L'Empereur uses a chit pull... [click here for more] |
Blue Panther LLC |
$17.99
|
AUTO STRATEGY SYSTEM
for MINIATURE BATTLE GAMES
Adjutant Introuvable (AI) will act as a stand-in for the absent opponent during a battle game. AI will formulate a Battle Plan by analysing the battlefield terrain and choosing the best strategy options, one of which will then be selected. AI will allocate units to four forces: Left, Centre, Right and Reserve. Once the Strategy Plan... [click here for more] |
nicbirt@gmail.com |
$10.00
|
Can't find a tabletop wargame opponent? This easily-readable guide provides the tools needed to undertake tabletop wargame campaigns without the need for other players. The guidelines presented within are designed to supplement your favorite wargaming rules set (not included). They can be bent or twisted, even broken and reformed, to suit a wargamer's needs. Novices and veterans alike can employ... [click here for more] |
Precis Intermedia |
$6.95
|
 Hex based terrain boards with village and farm terrain for creating a (1/285, 6mm) 3d battlefield.
Each tile is a large hexagon made up of smaller 1.93 inch (49 mm) hexagons. This is the largest Hexagon tile that can fit on a 220 mm print bed. If you have a larger print bed you can scale them by 103.6% to achieve 2 inches.
There 7 different tiles using 6 different building models. Roofs are printed... [click here for more] |
Two Inches of Felt |
$5.00
|
Eylau-1807 Solitaire is a 1-player print & play wargame where you can take command of the French Grand Armée of Napoleon or the army of the 4th Coalition of Count Bennigsen on the famous battlefield of Eylau. There are 9 games with 3 difficulty levels for each side resulting in a total of 18 (highly replayable) games. All you need is a pencil, an eraser and two 6-sided dice to play.
The game... [click here for more] |
Max Eisert |
$12.54
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$2.95
|

Fire & Movement: The Forum of Conflict Simulation was founded in 1976 by Rodger MacGowan and published by Diverse Talents, Inc. The rights and publishing of F&M currently reside with Decision Games and Past Into Print is the official creator and publisher of the electronic versions of this original print magazine.
F&M was published until 2005 and consists of 150 issues. It focused... [click here for more] |
Past Into Print |
$6.95
|
Glory is Fleeting is a set of Napoleonic Rules to recreate in miniature the wars of the French Revolution and Napoleonic period. These rules are an evolution of the Field of Glory (Napoleonic) ruleset, developed by the same authors who wrote FOG(N) version 2.
Glory is a corps level game suitable for pick-up causal games and to recreate historical battles. It is also a robust set of... [click here for more] |
Glory is Fleeting |
Pay What You Want
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Assembly time is about an hour for the whole set.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm,... [click here for more] |
Dave Graffam Models |
$2.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$1.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$4.95
|
 Although the author is a late convert to the joys of Napoleonic wargaming, he soon began to see why so many wargamers love the period. As a result, he set out to write several sets of rules that would use similar game mechanisms to those in his other PORTABLE WARGAME rules, and that would enable him to fight a range of small, medium, and large battles on a relatively small tabletop. This book is the... [click here for more] |
Eglinton Books |
$7.80 $7.71
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. It may look complicated, but every part of the Country Brewery is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the... [click here for more] |
Dave Graffam Models |
$6.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to... [click here for more] |
Dave Graffam Models |
$2.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about two hours.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$4.95
|
 Wars of Eagles and Empires is a rule set of division-level Napoleonic engagements. The rules are based on the popular Wars of Ozz system. The Double Random Activation(TM) system and the Reaction Test mechanic give the rules a bit of an old-school feel with new, streamlined mechanics.
This booklet is a supplement for the Mexican-American War. It includes a brief history of... [click here for more] |
BuckSurduPublications |
Pay What You Want
|

Star of Bravery is a narrative campaign supplement for Sharp Practice by TooFatLardies.
Star of Bravery offers a unique narrative experience. It allows one to three players to take on the role of French officers during the 1809 campaign against Austria. Perform heroic deeds on the battlefield, make difficult command decisions in between games and compete for... [click here for more] |
The Raft Games |
$6.50
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model set is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$1.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$2.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.
15mm to 30mm scale: This model set is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting... [click here for more] |
Dave Graffam Models |
$4.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the West Gate is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the complete... [click here for more] |
Dave Graffam Models |
$5.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$2.95
|
EASY TO BUILD: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15MM-30MM SCALE: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$1.95
|
 Great 72 is not a classic historical wargame. You won’t find scenarios for recreating specific battles or strictly defined army lists here. Instead, this is a set of flexible rules that allows you to use historical 1/72 miniatures to create exciting tactical battles and enjoy a simple, dynamic game. Whether you prefer historical settings or want to immerse your miniatures in a fantasy world,... [click here for more] |
Warbanda |
$9.99
|
 Print and Play British and French forces from the 18th Century period in the Indian sub-continent. All arranged in one page, you can print as many pages you want to add more units. Includes, British and French European Infantry, Cavalry and pieces to make your own Artillery piece. Also included one sheet of DIY force which can be coloured as neededto represent less common... [click here for more] |
Witwise Wargames |
$8.00 $4.00
|
 You've ever dream of playing big scale battles with rich sceneries and city ! With these 29 buildings, you will be able to build a huge city with enough variation on the board !
These are suitable for 18th century to WW2 era wargaming table. You will find many different houses and churches in this bundle
... [click here for more] |
Thenainblanc Studio |
$20.00
|
 This volume is a comprehensive set of over 160 Army lists for the Glory is Fleeting Napoleonic Rules.
Please note this volume contains lists only, the rules themselves are available in a separate volume (also available here in 'pay what you want' pdf form).
There is also an army list builder and QRS are available free from the facebook page. ... [click here for more] |
Glory is Fleeting |
Pay What You Want
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Village Pub is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the... [click here for more] |
Dave Graffam Models |
$3.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Optionally, you can use a piece of foamcore for the base.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk... [click here for more] |
Dave Graffam Models |
$2.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is just a few minutes per wall section.
15mm to 30mm scale: This model set is designed at the popular 28mm-30mm gaming scale, and can be shrunk... [click here for more] |
Dave Graffam Models |
$1.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$2.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about two hours.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or... [click here for more] |
Dave Graffam Models |
$4.95
|
Easy to build: This paper model is easy to assemble, requiring just cardstock sheets to print on (110# or 199gsm cardstock recommended), scissors, hobby knife and ordinary glue. Included are tips and advice for printing at various popular gaming and model railroad scales.
15mm to 30mm scale: One of the great things about papercraft models is that they can be... [click here for more] |
Dave Graffam Models |
$4.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$2.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is under an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$2.95
|
Easy to build: This paper model kit is easy to assemble, requiring just 8 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$4.95
|
Bote Action - 1550 - 1815
War by Sail is a simple yet comprehensive age of sail wargame, aimed at small fleet actions of 3 to 30 ships per side, with a focus on historical accuracy and flavor.
Researched and playtested for 10 months, War by Sail includes detailed ship rosters for 20 different conflicts, spanning from 1563 to 1812. Generic units are also provided... [click here for more] |
Ostfront Publishing |
$12.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$2.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$2.95
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm... [click here for more] |
Dave Graffam Models |
$1.95
|
A quick playing set of rules covering fleet actions in the age of sail where linear tactics were to the fore. The aim of these rules, which draw upon techniques and concepts from LFG’s “Cannon, Cross and Crescent” combined with a development span covering some 20 years has been to develop a quick play set that focusses on the command and control aspects of the battle, allowing large battles... [click here for more] |
Long Face Games |
$9.41
|
5th Edition Standard Rules for Les Bataille dans l'age l'Empereur Napoleon 1er tactical Napoleonic period games. This rule book comes with La Bataille de Ligny Second Edition game. ... [click here for more] |
Clash of Arms Games |
$6.00
|
Easy to build: This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about half an hour.
15mm to 30mm scale: This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or... [click here for more] |
Dave Graffam Models |
$2.95
|
A crane house like this is useful in any harbor, and might be the property of a merchant at their private pier or warehouse. It might be owned by a town or individual offering its services to the public, charging a small fee for every hoist. Such a structure would also be vital in an exchange market where bulk goods are being traded, where large freight needs to be moved from one wagon to another... [click here for more] |
Dave Graffam Models |
$1.95
|
Five Kilometers From Leipzig is a set of solo miniatures rules for black powder skirmish actions.
Take a band of 8 trusted companions and slug it out with enemy military forces, guerrillas or native warbands. Suitable for the era from roughly 1700 to 1870, the rules allow you to play a campaign easily and quickly.
Your characters will learn new skills, provided they survive the battle. ... [click here for more] |
Nordic Weasel Games |
$2.99
|
|
|