| Title |
Publisher |
Price |
More affluent members of early New England settlements could afford to build larger homes. Two stories with several rooms on each floor was common. This model represents such a home. Similar houses were built well into the 19th century and could be found further west as well.
The roof can be either permanently attached, or left loose to allow placing figures insided. There is also a removable second... [click here for more] |
Alex MacDonald |
$7.50
|
Delivered in downloadable .stl file format for your 3D Home printer.
This set include: a complete modular castle/fortress with walls (normly and destroyed), towers, buildings (keep & barraks) and more.
This are many parts with very highly details (also innerside of buildings) and approx 60 different parts. Attention the download is very big (over 1 GB).
It comes with 2 different kind of walls.... [click here for more] |
ESLO |
$49.95 $39.95
|
The most common type of home in Early New England villages were one or two room cottges. These were later often expanded into larger residences by adding a second floor, or additional rooms. This model represents a typical small cottage in its initial form. Similar homes were build later as the frontier opened to European settlement.
The roof can be either permanently attached, or left loose to allow... [click here for more] |
Alex MacDonald |
$5.00
|
This model is modular and can added more and more for a emplacement.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Printed and painted:
Minimum printbed needed is 20 x 20 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40... [click here for more] |
ESLO |
$7.95 $6.50
|
A set of 1/2400 scale STL files for LFG's "Those Who Seek Death" fleet action rules. The set comprises ten types of bases, five for the Korean navies, five for the Japanese, of the following types:
JAPANESE
O Ataka Bune
Ataka Bune (two varieties)
Seki Bune
Mekura Bune
KOREAN
Geobukseon
Geomseon
Panokseon Command
Panokseon (two varieties)
... [click here for more] |
Long Face Games |
$6.71
|
A set of 1/2400 scale STL files for LFG's "Those Who Seek Death" fleet action rules. The set comprises nine types of bases of the following types:
Chinese 4 deck flagship (2 different types)
Chinese 3 deck warship
Chinese single deck warship
Song Era large paddle warship
Song Era small paddle warship
Song Era small warship
Mortar rafts
Fire rafts
... [click here for more] |
Long Face Games |
$6.71
|
A set of Renaissance Galleys created in 1:600 scale but can be printed at half scale or 1:1200 with no supports ... [click here for more] |
Twylite Games |
$8.05
|
You will get all files to print this ship.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = ... [click here for more] |
ESLO |
$12.95 $9.95
|
This model set comes with a complete arabic waterwork.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Printed and painted:
Minimum printbed needed is 20 x 20 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40... [click here for more] |
ESLO |
$5.95 $4.95
|
Ghastly Graves is a set of stl files allowing you to 3d print your own gothic themed graveyard.
Files have been scaled for 28mm miniatures but, as with all 3d printable files, you have the ability to scale them up or down to suit your gaming needs. The headstones and monuments look great at a variety of sizes.
What you Get
you will recieve stl files for:
Headstones and broken... [click here for more] |
FoxCraft |
$35.00
|
Delivered in downloadable .stl file format for your 3D Home printer.
This set include: a complete modular castle/fortress with walls, tower (normly and destroyed), buildings, and some accessories.
This are many parts with very highly details (also innerside of buildings) and approx 60 different parts. Attention the download is very big (over 1 GB).
It comes with 2 different kind of walls.
Many... [click here for more] |
ESLO |
$59.95
|
Delivered in downloadable .stl file format for your 3D Home printer.
This set include: a complete modular asia / Shogun Castle with walls, tower (normly and destroyed), buildings, and some accessories.
This are many parts with very highly details (also innerside of buildings) and approx 60 different parts. Attention the download is very big (over 1 GB).
Model list:
Also include:
Example... [click here for more] |
ESLO |
$49.95
|
This building will make a fine addition to any Mediterranean city or town for your miniatures. The roof can be either permanently attached, or left loose to allow placing figures insided. It is printed in several pieces, and designed for a print bed of 200x140 mm or larger. ... [click here for more] |
Alex MacDonald |
$5.00
|
Early New England villages always centered on the Meeting House. This building served as church, town hall, and general purpose meeting place for all public gatherings. They genreally had little or no furniture, no heat, and were of modest, simple construction.
The roof can be either permanently attached, or left loose to allow placing figures insided. This building is printed in several pieces, and... [click here for more] |
Alex MacDonald |
$5.00
|
A typical small house of the type built by the early settlers of New England. This could be used for any small dwelling up to the early 1900s. The time and effort needed to make planks out of trees by hand resulted in making homes just large enough for the family to get out of the weather. They genreally had little furniture, and were of modest, simple construction. Up to a dozen people might dwell... [click here for more] |
Alex MacDonald |
$5.00
|
These buildings will make a fine addition to any Mediterranean city or town for your miniatures. The roofs can be either permanently attached, or left loose to allow placing figures insided. They printed in several pieces, and designed for a print bed of 200x140 mm or larger. ... [click here for more] |
Alex MacDonald |
$5.00
|
The "Crusades" 2nd Edition Starter Pack
The Starter Pack includes 6 Unit Cards and 2 Order of Play Cards.
The complete version Includes many new Units to include Priests, Mullahs, Camel Heavy Cavalry, the Pavise, Fierce Naffatan and Siege Towers or Covered Rams and the "House Rules" to play them!
Print, Cut out the Front & Back of each... [click here for more] |
Texas Games |
FREE
|
You will get all files to print this ship.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
cog_backsail.stl
cog_details.stl
cog_fix_upper_decks_back.stl
cog_fix_upper_decks_front.stl
cog_main_sail_fix.stl
cog_ship_back_fix.stl
cog_ship_front_fix.stl
shipwheel_holder_fix.stl
rigging2_2parts_fix.stl
cog_ship_middle_fix.stl
rigging_fix.stl
ropeholder_fix.stl
shipwheel_fix.stl
Minimum... [click here for more] |
ESLO |
$15.95
|
Medieval House Model 1
Voxel House is launching its line of buildings and ruins from the Medieval/fantasy times for any wargame system. Our buildings are made for 1/64 (28mm) scale and can also be used on the 15mm or 10mm scale. All of our buildings come in parts, enabling assembly as a one-piece 3D kit or print.
A typical peasant/city house is very common in fantasy/medieval sets.... [click here for more] |
Voxelhouse |
$2.99 $1.99
|
This set contains a Fortress in Vauban's pentagonal star shape style,
to play it's role in a Tabletop-game.
It is kept in a dimension matching for the limited space in table-top games, but can easily be extended by adding more 3D-prints or implementing some expansion models.
Ther are two types of bastions included, so you can choose matching to your wished size, you can enlarge the fortress... [click here for more] |
Xerbath |
$22.00
|
This set contains enough walls to build a chinese fortress designed for 15mm and 28mm wargaming. These are openable to put miniatures in them. Perfect for colonial era or world war 2 in central asia or for the pekin walls of the boxer rebellion. You will get :
Straight wall
Corner wall
Wall with stairs
Tower wall
Big Tower Wall
Door wall
Tower door wall
Big tower door wall
... [click here for more] |
Thenainblanc Studio |
$4.99
|
This set contains :
Straight Walls
Corner Wall
Round door opening walls
THese could be easily used for colonial wargaming for the first and second opium wars or for world war two in central asia. ... [click here for more] |
Thenainblanc Studio |
$3.99
|
This set contains two simple houses designed for 15mm and 2mm wargaming. These are openable to put miniatures in them. ... [click here for more] |
Thenainblanc Studio |
$4.49
|
This set contains two simple houses designed for 15mm and 2mm wargaming. These are openable to put miniatures in them. Perfect for colonial era or world war 2 in centrl asia ! ... [click here for more] |
Thenainblanc Studio |
$4.49
|
This set contains one big chinese house designed for 15mm and 28mm wargaming. These are openable to put miniatures in them. Perfect for colonial era or world war 2 in central asia ! ... [click here for more] |
Thenainblanc Studio |
$4.99
|
This set contains one chinese house designed for 15mm and 28mm wargaming. These are openable to put miniatures in them. Perfect for colonial era or world war 2 in central asia ! ... [click here for more] |
Thenainblanc Studio |
$4.49
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
backsail_fix.stl
3x_pole_moust_fix.stl
firstsail_fix.stl
junk_back_fix.stl
junk_deck_fix.stl
junk_front2_fix.stl
junk_front_fix.stl
junk_front_fix.stl
junk_shiphouse_fix.stl
junk_shipwheel_fix.stl
mainsail_fix.stl... [click here for more] |
ESLO |
$17.95 $14.95
|
Delivered in downloadable .stl file format for your 3D Home printer.
This set include: a complete modular desert fort with walls, tower (normly and destroyed), buildings, and some accessories.
This are many parts with very highly details
Model list:
Example Scale factor: 10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75 - 80% 28mm = 100 % (0 Railroad)
Minimum printbed needed is 15 x... [click here for more] |
ESLO |
$36.95
|
You will get all files to print this ship.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
Updatet Version:
This parts are included:
frontsail_2half_fix.stl
mainsail_2half_fix.stl
roman_tower_fix.stl
ruder_backside_fix.stl
ruder_fix.stl
thieme_back_fix.stl
thieme_backud_fix.stl
thieme_front_fix.stl
thieme_frontud_fix.stl
thieme_middle1_fix.stl
thieme_middle2_fix.stl
thieme_middleud_fix.stl
trimere_house_fix.stl
Minimum... [click here for more] |
ESLO |
$15.95
|
Here is a free sample of our upcoming 3D printable scenery range for Wargames and RPG.
You'll find enclosed stl files to print the model on any 3D printer.
This is a multi part model in 28mm scale that needs assembly as follow :
The recommended settings are for PLA printing on any entry level 3D printer, adapt as needed to your printer .
100 or 150 microns layer height
5% to 15% percent infill... [click here for more] |
Via Ludibunda |
Pay What You Want
|
This set contains enough part to make many house for the south american wars or for the colonial era. These are perfectly scaled for 15mm gaming and could be rescaled easely for 10mm or 28mm gaming. You will get :
2 different 1st floors
3 different second and 3rd floors
2 different roofs files
... [click here for more] |
Thenainblanc Studio |
$8.99
|
This model is modular and can added more and more for a big port / Harbor.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
haborstage_fix.stl
modhabor_empl_fix.stl
modharbor_fix.stl
stair_fix.stl
Minimum printbed needed is 20 x 20 cm and 15... [click here for more] |
ESLO |
$10.95 $8.50
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like and... [click here for more] |
Fat Dragon Games |
$24.99
|
Includes all necessary files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
cannon_fix.stl
cannon_halfs_fix.stl
ballista_fix.stl
haroun_fix.stl
mortar_fix.stl
mortar_halfs_fix.stl
smallcannon_fix.stl
Minimum printbed needed... [click here for more] |
ESLO |
$8.95
|
Guard Tower
Voxel House is launching its line of buildings and ruins from the Medieval/fantasy times for any wargame system. Our buildings are made for 1/64 (28mm) scale and can also be used on the 15mm or 10mm scale. All of our buildings come in parts, enabling assembly as a one-piece 3D kit or print.
A Guard Tower for your fantasy/medieval scenario and your wargame table!
Get... [click here for more] |
Voxelhouse |
$1.99
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like and... [click here for more] |
Fat Dragon Games |
$9.99
|
An add-on for the Vauban fortress basic set, with 5 types of bastions, an adapter matching to the rectangular fortress set, and courtine extensions allowing to increase the width of the parapet walk (you need theCourtine extension set).
With this extension, you'll get a really mighty fortress in every size you want.
Al STL-Files in 25mm and 28mm scale. ... [click here for more] |
Xerbath |
$13.50
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like and... [click here for more] |
Fat Dragon Games |
$9.99
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
sheft_fix..stl
chair_fix.jpg.stl
table_fix.stl
wandrobe_fix.stl
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale... [click here for more] |
ESLO |
$6.95
|
You will get all files to print this ship.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75 - 80% ... [click here for more] |
ESLO |
$18.45 $15.95
|
You will get all files to print this ship. Delivered in downloadable .stl file format for your 3D Home printer.
This parts are included:
3xmast_fix.stl
3x_pole_moust_fix.stl
big_sail_fix.stl
pole_mount_fix.stl
pinacce_front_1_fix.stl
pinacce_front_1_fix_2parts.stl
pinacce_front_2_fix.stl
pinacce_middle_fix.stl
rigging2_2parts_fix.stl
rigging2_fix.stl
rigging_fix.stl
ropeholder_fix.stl
shipwheel_fix.stl
shipwheel_holder_fix.stl
small_sail_fix.stl
Minimum... [click here for more] |
ESLO |
$18.45 $15.95
|
This set contains a long courtine with an artillery embrasure matching to the Fortress in Vauban's star shape style, comes in two versions with different inner wall.
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$3.00
|
This set contains a so called "Ravelin" matching to the Fortress in Vauban's star shape style,
Ravelins are used to protect the wall, "Courtines" of a fortress. Of course it can perfectly used as bastion in ACW or other scenarios
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$6.00
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like and... [click here for more] |
Fat Dragon Games |
$9.99
|
This set contains enough part to make many house for the south american wars or for the colonial era. These are perfectly scaled for 15mm gaming and could be rescaled easely for 10mm or 28mm gaming. You will get :
2 different 1st floors
3 different second and 3rd floors
2 different roofs files
... [click here for more] |
Thenainblanc Studio |
$8.99
|
This set contains enough part to make many house for the south american wars or for the colonial era. These are perfectly scaled for 15mm gaming and could be rescaled easely for 10mm or 28mm gaming. You will get :
2 different 1st floors
3 different second and 3rd floors
2 different roofs files
... [click here for more] |
Thenainblanc Studio |
$8.99
|
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75 - 80% 28mm = 100 % (0 Railroad)
If you need... [click here for more] |
ESLO |
$7.50 $4.00
|
Delivered in downloadable .stl file format for your 3D Home printer.
This set include:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75 - 80% 28mm = 100 % (0 Railroad)
Minimum printbed needed is 15 x 15 cm and 15 cm high.
If you need a printed Version, please write us a email.
All files are not for commercial use!... [click here for more] |
ESLO |
$6.95 $4.95
|
You will get all files to print this items.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75 -... [click here for more] |
ESLO |
$12.95 $8.95
|
Voxel House is launching its line of buildings and ruins from the Medieval/fantasy times for any wargame system. Our buildings are made for 1/64 (28mm) scale and can also be used on the 15mm or 10mm scale. All of our buildings come in parts, enabling assembly as a one-piece 3D kit or print. Outhouse kit is a made for your hero when nature calls!!! You can build a lot of different outhouses!
Ideal... [click here for more] |
Voxelhouse |
Pay What You Want
|
Log In 
