| Title |
Publisher |
Price |
Fantastic Battles is a fast-play, mass-battle, wargaming system for any fantasy setting. The rules emphasise the tactical concerns of command friction and the fog of war through randomised initiative, tabletop mishap rolls and the impetuous decisions of unsupervised unit commanders.
An all-in-one volume, this book contains the rules for stand-alone pitched battles as well as campaigns.
Twenty-four... [click here for more] |
NLWright |
$11.56
|
The second edition of Basic Impetus is a flexible, innovative and fast play system to play the ancients and medieval periods.
It is provided with 340 (totally revised) army lists ranging from Sumerian to Renaissance.
This set is not just a refreshement of the old version but can be considered an updated and light version of Impetus.
All measurements are related to base width: this... [click here for more] |
Dadi&Piombo |
$4.99
|
Welcome to CLASH!
Keep your wits and courage at hand, for in CLASH you will need both to lead your band of warriors to victory.
CLASH of Spears allows you to play raids and skirmishes in ancient times using small forces of 30 or more figures per side. This fast-paced game demands constant attention from all players as they alternate using their commanders... [click here for more] |
Fighting Hedgehog |
$24.00 $19.00
|
To the Strongest! is a set of simple rules for Ancient and Medieval tabletop wargaming. It enables a battle to be fought with model soldiers on a dining room table and won or lost in less than two hours. But the rules also support huge battles, with several thousand figures and up to five players a side.
Games can be played with miniatures in any scale and based for any of the common wargaming rules... [click here for more] |
To the Strongest! |
$13.99
|
Welcome to the edge of civilization, where brigands rule and where the shadows are long.
In tiny villages, people huddle in fear as terrors prowl the night.
Out here, your word is as good as your sword and nobody will miss you.
Five Leagues From the Borderlands is a set of solo miniatures rules for fantasy campaign games.
Taking inspiration from gritty "medieval-fantasy" like The Black... [click here for more] |
Nordic Weasel Games |
$15.99
|
A solo game where you command a group of Vikings cut off and trying to make it to safety while being pursued by lots of angry Anglo Saxons.
A simple game to learn and play but should be lots of fun with plenty of variable factors to make each game different.
Requires individually based figures ideally 28mm but any scale will do. ... [click here for more] |
Terry Catton |
$2.04
|
Blood, mud and shining steel. It's medieval warfare so personal, you might catch the plague!
* * * * *
Knyghte Pyke and Sworde is a set of miniatures gaming rules for "mass skirmish" games ranging from 4-5 figures on each side up to battles with 30-40 figures each.
As the name suggests, the rules are intended for dark age through medieval battles though I have included provisions for early... [click here for more] |
Nordic Weasel Games |
$9.99
|
The long awaited Core Rule Book from Wiley Games, makers of Fistful of Lead, is finally here. The long-time favorite Fistful of Lead started as a Wild West game with card-driven mechanics that created Hollywood action. Now Wiley Games presents the Core Rule Book. The Core Rule Book can be used with multiple periods and genres, while still giving you the unique card driven mechanics... [click here for more] |
Jaye Wiley |
$6.99
|
Lion Rampant: The Crusader States is an expansion for Lion Rampant: Medieval Wargaming Rules. It is an historical gamebook that explores the Middle East during the heyday of the Crusades, between 1097 and 1291. The Crusader States of the Holy Land were a unique meeting point for people and military forces from all over Europe and the Middle East, but also from... [click here for more] |
History and Games Lab Edinburgh |
$20.41
|
Fistful of Lead: Bigger Battles is designed as a quick set of tabletop wargaming rules for skirmishes in your favorite wargaming period or genre. Like all of our Fistful of Lead games, the rules are simple to learn, but Bigger Battles is not necessarily a simple game. What separates Bigger Battles from most tabletop miniature games on the market, is the unique card... [click here for more] |
Jaye Wiley |
$6.99
|
Blood on the Blade - 2nd Edition is the newest release of Blood on the Blade, a micro but complete set of rules for solitaire or co-op skirmish game set on a fantasy background. “Micro” refers to the small set of rules, the small time required to complete one game session and the small number of miniatures required (4-10 figures being a common range). Many micro-details... [click here for more] |
STUDIUM CMLXV |
$8.00
|
This PDF contains 106 TtS! medieval army lists, including background information on the armies and images of painted wargames figures. The medieval lists cover the 600-1500 CE period.
I will be publishing updated versions of this book with new material at approximately three monthly intervals until the end of 2022. I'll post the new ... [click here for more] |
To the Strongest! |
$13.99
|
Second edition of Impetus, the popular set of wargame rules that aims to simulate battles with miniature figures in the Ancient, Medieval and Renaissance periods. The extremely flexible system allows you to recreate over 3,000 years of history, from Ancient Sumeria to the Great Italian Wars and even further. Until the release of the updated lists you can still use the old Extra Impetus supplements... [click here for more] |
Dadi&Piombo |
$14.99
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Village Chapel is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the complete structure... [click here for more] |
Dave Graffam Models |
$5.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about half an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Sellswords and Spellslingers is a solo and cooperative fantasy miniatures game for 1 to 6 players.
Each player creates a party of fantasy adventurers with a point system. Then players choose a scenario and try to complete a mission. Foes and events are moved automatically by a deck of cards. Characters grow with experience, and a list of campaign activities is provided.... [click here for more] |
Ganesha Games |
$8.00
|
Bote Action - 1550 - 1815
War by Sail is a simple yet comprehensive age of sail wargame, aimed at small fleet actions of 3 to 30 ships per side, with a focus on historical accuracy and flavor.
Researched and playtested for 10 months, War by Sail includes detailed ship rosters for 20 different conflicts, spanning from 1563 to 1812. Generic units are also provided... [click here for more] |
Ostfront Publishing |
$12.00
|
ADVANCED SONG OF BLADES AND HEROES PDF
Advanced Song of Blades and Heroes is the updated incarnation of the award-winning Song of Blades miniatures system.
Play fantasy skirmishes in any scale, with any models you already own.
With an expanded magic system, an exciting turn sequence, a reaction system, an optional setting, weapon rules, an open-source point system,... [click here for more] |
Ganesha Games |
$20.00 $10.00
|
TRIUMPH! is a fast play set of rules for miniature wargaming. Covering the ancient and medieval periods, TRIUMPH! allows you to recreate the armies of Ramesses and Muwatalli, Caesar and Pompey, Saladin and Richard the Lionheart.
Meshwesh is the online database of army lists for TRIUMPH! You can access Meshwesh through the Washington Grand Company web site.
This is the v1.1 PDF edition of Triumph!... [click here for more] |
Washington Grand Company |
$15.00
|
A solo game you have to get a small party of Anglo Danes to safety in the aftermath of the Battle of Hatings while being pursued by the victorious Norman forces.
Simple to learn and play requires individually based figures ideally 28mm but any side will do. ... [click here for more] |
Terry Catton |
$2.04
|
This PDF contains 140 TtS! ancient army lists, including background information on the armies and images of painted wargames figures. The ancient lists range from the Third Millennium to around 600 CE in the Dark Ages.
I will be publishing updated versions of this book with new material at approximately three monthly intervals until the end of 2022, and will post them here as they become available.... [click here for more] |
To the Strongest! |
$13.99
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
The MAYHEM Battle Chest edition contains both the core rules and the STRONGHOLD expansion.
MAYHEM is a 'fantasy mass battle' combat game played on the grand scale. Here generals lead armies of their own creation on the field of battle in search of victory and glory. Not just for wargamers, MAYHEM is perfect for roleplayers... [click here for more] |
Brent Spivey Creations |
$9.99
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. It may look complicated, but every part of the Country Brewery is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the complete structure you... [click here for more] |
Dave Graffam Models |
$6.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour for the whole set.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Can't find a tabletop wargame opponent? This easily-readable guide provides the tools needed to undertake tabletop wargame campaigns without the need for other players. The guidelines presented within are designed to supplement your favorite wargaming rules set (not included). They can be bent or twisted, even broken and reformed, to suit a wargamer's needs. Novices and veterans alike can employ... [click here for more] |
Precis Intermedia |
$6.95
|
"And when Balyn saw the spear, he gat it in his hand, and turned him to King Pellam, and smote him passingly sore with that spear, that King Pellam fell down in a swoon; and therewith the castle rove and the walls brake, and fell to the earth, and Balyn fell down, so that he might not stir hand nor foot"
-Thomas Mallory
The Dolorous Stroke - named after the fateful blow that sets in... [click here for more] |
Dying Stylishly Games |
$5.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on... [click here for more] |
Dave Graffam Models |
$1.95 $1.00
|
Wargame army units based on the standard frontage of 40mm (DBX). showing generic mannaquin figures for over 50 different unit types to cover the period 3000 BC to 1450 AD.
In addition the set includes counters for camps and villages, and terrain sheets which can be mounted and cut to the sizes required by the player's rules for woods, rough, fields, hills Etc.
Counters will never replace the... [click here for more] |
Geoff Curran |
$13.31 $13.25
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Inventor's House is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the complete structure... [click here for more] |
Dave Graffam Models |
$5.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on... [click here for more] |
Dave Graffam Models |
$3.95 $1.00
|
Of Armies and Hordes is an army levelwargame using area movement and abstract maneuvering to simplify play while retaining all the tactical choices and variables required by the genre.
NOTE that area movement is NOT OPTIONAL: you cannot play these rules with inch measuring or measuring sticks. You NEED 30-48 areas (of any shape, the author suggest irregular) marked on... [click here for more] |
Ganesha Games |
$21.00 $10.00
|
Caterina de Padua, Venice’s famed thief the Midnight Rose watched the Campo de San Marti from her perch atop a small church, Santa Maria de whatever–the name wasn’t important. What was important was the larger basilica style church visible beyond the campo. La chiese de Santa Marina di Laguna. She was waiting for her mentor and handler, Father Vittorio to light their special signal lamp. ... [click here for more] |
Finger and Toe Models |
$7.00
|
Game design: Tom Russell Hex number: 18 Duration: 20 minutes Players: 2 Solitaire Suitability: High Theme: All of human history
Table Battles cards have been upated to 2nd Edition with two new scenarios. (8-24-2020)
Here is something new and exciting, something... [click here for more] |
Hollandspiele |
$12.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about two hours.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage... [click here for more] |
Dave Graffam Models |
$3.95 $1.00
|
This paper model is easy to assemble, requiring just cardstock sheets to print on (110# or 199gsm cardstock recommended), scissors, hobby knife and ordinary glue. Included are tips and advice for printing at various popular gaming and model railroad scales. One of the great things about papercraft models is that they can be printed at any popular gaming scale quite easily, so this model can be... [click here for more] |
Dave Graffam Models |
$3.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat.
This model set is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat.
This model set is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on your printer. Tips and advice... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the West Gate is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the complete structure you... [click here for more] |
Dave Graffam Models |
$5.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Optionally, you can use a piece of foamcore for the base.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. It may look complicated, but every part of the Village Pub is simple to assemble on its own, and putting it together is just a matter of building up the simple shapes into the complete structure you... [click here for more] |
Dave Graffam Models |
$3.95 $1.00
|
This paper model is easy to assemble, requiring just cardstock sheets to print on (110# or 199gsm cardstock recommended), scissors, hobby knife and ordinary glue. Included are tips and advice for printing at various popular gaming and model railroad scales. One of the great things about papercraft models is that they can be printed at any popular gaming scale quite easily, so this model can be... [click here for more] |
Dave Graffam Models |
$4.95 $1.00
|
This paper model kit is easy to assemble, requiring just 18 cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, metal ruler and cutting mat. Optionally, you can use a piece of foamcore for the base.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the... [click here for more] |
Dave Graffam Models |
$5.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on... [click here for more] |
Dave Graffam Models |
$1.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on... [click here for more] |
Dave Graffam Models |
$3.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
This paper model kit is easy to assemble, requiring just cardstock paper sheets to print on (110 lb. or 199gsm recommended), scissors, hobby knife, paper glue, aluminum ruler and cutting mat. Assembly time is about an hour.
This model is designed at the popular 28mm-30mm gaming scale, and can be shrunk down to 15mm, 20mm or 25mm scales by simply adjusting the print size percentage on... [click here for more] |
Dave Graffam Models |
$2.95 $1.00
|
Wargame Fleets : 3000 BC to 1200 AD
The Perfect Compliment to 'He Hemetera Thalassa, Mare Nostrum'
Provides counters showing 27 Different boats from this era, including:
Early Galleys,
all of the Classical Tiremes and Polyremes,
Byantine and Arab ships,
Merchants in three sizes.
Coastal/ island terrain and damage / status counters.
Counters are 40mm x 40mm... [click here for more] |
Geoff Curran |
$6.00
|
Log In 
