| Title |
Publisher |
Price |
Midgard Heroic Battles 3D STLs – Personal Use (to print a few sets for yourself or a club)
This is a bundle of 5 STL files needed to 3D print the following for Midgard Heroic Battles published by Reisswitz Press.
Half Spear Throw Ruler (60 x 15 x 12mm)
One Spear Throw Ruler (120 x 15 x 12mm)
Two Spear Throw Ruler (240 x 15 x 12mm)
Charging or Winning Marker (20 x 25mm)
Shot Marker (20... [click here for more] |
Mogsymakes |
$7.76
|
3D Print Ancient galleys for naval wargames. 1/600 scale. This set contains:
- 2 biremes types
- 3 triremes types
- 1 quinquireme
- 1 merchant boat (Roman) ... [click here for more] |
Voxelhouse |
$5.99
|
A range of 1:300 Ancient Galleys , there is a single zip file containing all the models shown ... [click here for more] |
Twylite Games |
$23.47 $22.95
|
Create flexible 2mm town and village landscapes with your 3D printer using these .stl terrain tiles
includes:
Mediterranean village and town dwelling tiles
North European village and town dwelling tiles
Civic tiles - Coliseum, Forum, Citadel, Temple, Church
City walls and gatehouse (square and round towers)
all tiles are 40mm x 40mm
Free updates and additions will be supplied as the range... [click here for more] |
CC Publishing |
$2.59 $1.94
|
CUBES!
Printable 3D cube heads (in a weathered and crumbling stone finish) for use with 28mm wargames figures. Cubes include a little nubbin for easy attachement to a range of figures.
Included are unsupported & supported files for a set of 12 CUBE HEADS to suit 28mm scale infantry and 3 BIG CUBE HEADS that are slightly larger and would work well with Ogre sized units at that scale.
THE... [click here for more] |
Apocrypha_Now |
$3.00
|
This model set comes with a complete and a ruined building.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75... [click here for more] |
ESLO |
$9.95 $8.95
|
Alexandria´s Lighthouse not included
FDM Printing
Streets of Rome are an Ancient Buildings set for your terrian/naval wargame table. 1/600 Scale. It´s a new specil project from Vocelhouse For FDM and SLA Printers. This set contains the following STL files :
- 3 roman houses
- 1 insulae
- 1 noble house
- 1 governmental building
- 1 warehouse
- 1 Obelisk
- Colisseum
- Port System
-... [click here for more] |
Voxelhouse |
$7.99 $5.99
|
This model set comes with a complete and a ruined farm.
printed and painted version:
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Minimum printbed needed is 20 x 20 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm... [click here for more] |
ESLO |
$8.95
|
This model set comes with a complete and a ruined building.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Minimum printbed needed is 20 x 20 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = ... [click here for more] |
ESLO |
$9.95 $8.95
|
"Perhaps the most famous of the Hellenistic-era warships, because of its extensive use by the Carthaginians and Romans, the quinquereme (Latin: quinqueremis; Greek: πεντήρης, pentērēs) was invented by the tyrant of Syracuse, Dionysius I (r. 405–367 BC) in 399 BC, as part of a major naval armament program directed against the Carthaginians.[During most of the 4th century,... [click here for more] |
Voxelhouse |
$1.49
|
Delivered in downloadable .stl file format for your 3D Home printer.
This set include: a complete modular fort with walls, tower, tents, buildings, and some accessories.
Many items included:
many details:
Example Scale factor: 10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75 - 80% 28mm = 100 % (0 Railroad)
Minimum printbed needed is 15 x 15 cm and 15 cm high.
If you need a printed... [click here for more] |
ESLO |
$34.95 $29.95
|
Lead your heroes to victory in the Hidden War against the Cults of Cthulhu. Including Centurion Marius, Vexilarious Lucius, Druid Suibhne, Sarmation Archer Vita, High Priestess Maeren, and Chieftain Aldegar.
Designed for use with both the Cohors Cthulhu Roleplaying Game and Cohors Cthulhu: Tactics.
This 3D print product lets you print six 28mm... [click here for more] |
Modiphius |
$15.00
|
Delivered in downloadable .stl file format for your 3D Home printer.
This set include: a complete modular fort with walls, tower, buildings, and some accessories.
Content:
modular:
many details:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75 - 80% 28mm = 100 % (0 Railroad)
Minimum printbed needed is 15 x 15 cm and 15 cm high.
If you need a printed... [click here for more] |
ESLO |
$34.95 $32.95
|
Roman Ancient Buildings for your naval wargame table. 1/600 Scale. This set contains:
- 3 roman houses
- 1 insulae
- 1 noble house
- 1 governmental building
- 1 warehouse ... [click here for more] |
Voxelhouse |
$4.99
|
This model set comes with a complete arabic waterwork.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Printed and painted:
Minimum printbed needed is 20 x 20 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40... [click here for more] |
ESLO |
$5.95 $4.95
|
Ancient temple for your wargame table. 3d printing model 1/600 scale ... [click here for more] |
Voxelhouse |
$1.99
|
STL files to print deck boxes to hold the Disaster and Set Back decks for Mark Backhouse’s “Strength & Honour, rules for epic battles in the ancient world”.
Designs are based on a scan of an Athenian grave stele.
The boxes pictured were printed from PLA on my Ender3 pro without supports. Finished with acrylic craft paints.
Pay-what-you-want, yours for free.
Checkout my range of laser... [click here for more] |
Lasercast |
Pay What You Want
|
"The Lighthouse of Alexandria, sometimes called the Pharos of Alexandria (/ˈfɛərɒs/; Ancient Greek: ὁ Φάρος τῆς Ἀλεξανδρείας, contemporary Koine Greek pronunciation: [ho pʰá.ros teːs a.lek.sandréːaːs]), was a lighthouse built by the Ptolemaic Kingdom, during the reign of Ptolemy II Philadelphus (280–247 BC), which has been estimated to be 100 metres (330 ft) in... [click here for more] |
Voxelhouse |
$2.99
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like... [click here for more] |
Fat Dragon Games |
$9.99 $1.99
|
Join the Hidden War and defend the town of Laurium against the Cults of Cthulhu. Including the heroes Publius, Amalthea, Penrod, Valda, and Ekkehard.
Designed for use with both the Cohors Cthulhu Roleplaying Game and Cohors Cthulhu: Tactics.
This 3D print product lets you print five 28mm scale high quality single-part Cohors Cthulhu miniatures... [click here for more] |
Modiphius |
$15.00
|
Join the Hidden War and defend the town of Laurium against the Cults of Cthulhu. Including the heroes Atreba, Buccio, Ubovvi, Kaeso, Geta, and Tadhg.
Designed for use with both the Cohors Cthulhu Roleplaying Game and Cohors Cthulhu: Tactics.
This 3D print product lets you print six 28mm scale high quality single-part Cohors... [click here for more] |
Modiphius |
$15.00
|
Rally the troops and lead the charge against the Cults of Cthulhu with this set of heroic Roman Legionaries.
Designed for use with both the Cohors Cthulhu Roleplaying Game and Cohors Cthulhu: Tactics.
This 3D print product lets you print five 28mm scale high quality single-part Cohors Cthulhu miniatures and bases.
Files have been... [click here for more] |
Modiphius |
$12.00
|
Dare you face these malevolent monsters and minions of the Cult of Mormo? Featuring one Overlord, one Priest, and two Servitor Legionaries.
Designed for use with both the Cohors Cthulhu Roleplaying Game and Cohors Cthulhu: Tactics.
This 3D print product lets you print four 28mm scale high quality single-part Cohors Cthulhu miniatures and... [click here for more] |
Modiphius |
$10.00
|
Modular ancient Harbour set. 3d printing miniature 1/600 scale. For your ancient naval wargame table. Thi set contains:
- Harbour parts
- Warehouse
- 1 lighthouse ... [click here for more] |
Voxelhouse |
$4.99
|
This bundle contains unsupported .STL files. Designed for the Margrave: The Marcher Lords range, this Ancient Greek Colossus is the perfect inclusion for any wargame or RPG campaign.
The .ZIP file includes .STL files for the pictured miniature, and includes pre-cut and fully assembled versions for those with a larger print bed.
Please note: this is an STL ONLY for... [click here for more] |
Three Sails Studios |
$6.47
|
This bundle contains unsupported .STL files. Designed for the Margrave: The Marcher Lords range, this Ancient Greek Hoplite Hero is the perfect inclusion for any wargame or RPG campaign.
The .ZIP file includes .STL files for the pictured miniature, and includes files for miniatures with a 25mm round base, miniatures without a base, and a file for a separate 25mm base.... [click here for more] |
Three Sails Studios |
$1.29
|
This bundle contains unsupported .STL files. Designed for the Margrave: The Marcher Lords range, this Ancient Greek Myrmidon Hero is the perfect inclusion for any wargame or RPG campaign.
The .ZIP file includes .STL files for the pictured miniature, and includes files for miniatures with a 25mm round base, miniatures without a base, and a file for a separate 25mm base.... [click here for more] |
Three Sails Studios |
$1.29
|
This set contains :
1 generic biblical/ancient city for the mesopotamian area
1 city with a temple/palace on a hills designed to be used as Troy but can also be used for any other nation of that time
1 city entrance to be used as a camp for a DBA or ADLG army
All these sceneries have been designed to be used straight from the printer on a 15mm DBA table or ADLG gaming table. They respect the mesurement... [click here for more] |
Thenainblanc Studio |
$9.74
|
4 bases for cavalery miniatures -STL files- 3D print model
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Perfect for your miniatures!
Minimum printbed needed is 150 x 260 mm and 100 mm high.
If you need a printed Version, please write us a email.
All files are not for commercial... [click here for more] |
ESLO |
$5.95 $4.95
|
The Astral Gateway is a set of stl files for 3D printing your own gateway to the stars or perhaps a portal to another dimension, ideal for war-gaming terrain or sci-fi/fantasy RPG's. The set consists of a dimensional ring, obelisks, a contol circle, turntracker and a bunch of battle damaged or ruined pieces.
Files have been scaled for 28mm miniatures but, as with all 3D printable files, you have... [click here for more] |
FoxCraft |
$12.00
|
This bundle contains four unsupported .STL files. Designed for the Margrave: The Marcher Lords range, these Ancient Greek Temple Acolytes are the perfect inclusion for any wargame or RPG campaign.
The .ZIP file includes .STL files for all four pictured miniatures, and includes files for miniatures with a 25mm round base, miniatures without a base, and a file for a separate... [click here for more] |
Three Sails Studios |
$5.18
|
This bundle contains four unsupported .STL files. Designed for the Margrave: The Marcher Lords range, these Ancient Greek Hoplites are the perfect inclusion for any wargame or RPG campaign.
The .ZIP file includes .STL files for all four miniatures, and includes files for miniatures with a 25mm round base, miniatures without a base, and a file for a separate 25mm base.... [click here for more] |
Three Sails Studios |
$5.18
|
This bundle contains four unsupported .STL files. Designed for the Margrave: The Marcher Lords range, these Ancient Greek Myrmidons are the perfect inclusion for any wargame or RPG campaign.
The .ZIP file includes .STL files for all four pictured miniatures, and includes files for miniatures with a 25mm round base, miniatures without a base, and a file for a separate 25mm... [click here for more] |
Three Sails Studios |
$5.18
|
This bundle contains unsupported .STL files. Designed for the Margrave: The Marcher Lords range, this Ancient Greek Warrior Poet is the perfect inclusion for any wargame or RPG campaign.
The .ZIP file includes .STL files for the pictured miniature, and includes files for miniatures with a 25mm round base, miniatures without a base, and a file for a separate 25mm base.... [click here for more] |
Three Sails Studios |
$1.29
|
A Maccabean Campaign Game - Judea 166 BCE to 160 BCE - by Nic Birt
This campaign game is set up for the player to control the Maccabean forces while the Seleucid forces are controlled by a solo 'Ancient Intuition' (AI) system. The campaign was designed to set up campaign battles which could be resolved with miniature battle games using the De Bellis Antiquitatis rules with the... [click here for more] |
nicbirt@gmail.com |
$7.50
|
Delivered in downloadable .stl file format for your 3D Home printer.
This set include: a complete modular castle/fortress with walls, tower (normly and destroyed), buildings, and some accessories.
This are many parts with very highly details (also innerside of buildings) and approx 60 different parts. Attention the download is very big (over 1 GB).
It comes with 2 different kind of walls.
Many... [click here for more] |
ESLO |
$49.95 $29.95
|
This set contains modular elements to build a modular roman arena for gladiator games. Works really well with 28mm games like jugula :
... [click here for more] |
Thenainblanc Studio |
$6.99
|
This set contains modular elements to build a roman fortification for ancient wargaming. THese have been designed for 15/10/6mm wargaming.
... [click here for more] |
Thenainblanc Studio |
$6.99
|
This is an stl collection of rocks and boulders from previous FoxCraft sets, now compiled into one larger set of rocks and boulders. Perfect for adding more variety to your gaming tabletop.
Battle damaged boulders
Single boulders plus a half buried skeleton
Even more boulders, some rock pillars, a rock pool, a second archway, and another pile of bones.
... [click here for more] |
FoxCraft |
$14.95
|
This bundle contains unsupported .STL files. Designed for the Margrave: The Marcher Lords range, these Ancient Greek Truce Riders are the perfect inclusion for any wargame or RPG campaign.
The .ZIP file includes .STL files for both pictured miniatures, and includes files for miniatures with a 50mm round base, miniatures without a base, and a file for a separate 50mm base.... [click here for more] |
Three Sails Studios |
$5.18
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you... [click here for more] |
Fat Dragon Games |
$9.99 $7.49
|
You will get all files to print this ship.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
dragonheads_fix.stl
ruder_fix.stl
sail.stl
pole_mount_fix.stl
sailholder_fix.stl
shield1.stl
shield2.stl
vikinglongboat_back_fix.stl
vikinglongboat_front_fix.stl
vikinglongboat_middle_fix.stl
Minimum... [click here for more] |
ESLO |
$12.95
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like... [click here for more] |
Fat Dragon Games |
$9.99 $7.49
|
Terrain obstacle pieces made for tabletop gaming. Total 16 pieces of realistic land formations from various biomes. Various impassable pieces of rock formations, asymmetrical hills, mountains, islands, valleys and much more. Good for painting, weathering, vegetation dressing and kitbashing. Suitable for decorating dioramas, combining and tabletop gaming. Suitable for both fantasy, sci-fi and modern... [click here for more] |
MuM |
$9.00
|
You will get all files to print this ship.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75 - 80% ... [click here for more] |
ESLO |
$18.45 $15.95
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like... [click here for more] |
Fat Dragon Games |
$9.99 $7.49
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you... [click here for more] |
Fat Dragon Games |
$9.99 $7.49
|
Welcome to Future Worlds Landscapes
Landscapes is the first truly modular, scaleable and system agnostic 3D printable terrain system. It gives you the ability to quickly build terrain featurs such as hills, cliffs, rivers and arroyos for your wargames and RPGs. These features can be pulled apart and then rebuilt into completely different configurations to suit... [click here for more] |
Arid Hills Gaming |
$15.00
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like... [click here for more] |
Fat Dragon Games |
$9.99 $7.49
|
You will get all files to print this items.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Miniature with and without base and pre-supported Version
Scale is for 28 -32 mm Miniatures (approx 1/48) you can rescale... [click here for more] |
ESLO |
$5.95 $4.95
|
Log In 
