| Title |
Publisher |
Price |
Save 40% with this incredible bundle offer HERE.
Today is a good day to die... for the enemy crew!
BATTLEFRONT VALKYRIE™ is a groundbreaking 3D printable wargame that delivers the thrill of epic fleet battles right to your tabletop, all at a cost that's just a fraction of traditional games!
This expansion set includes: Kurgun C-5A Heavy Cruiser... [click here for more] |
Fat Dragon Games |
$4.99
|
Save 40% with this incredible bundle offer HERE.
Today is a good day to die... for the enemy crew!
BATTLEFRONT VALKYRIE™ is a groundbreaking 3D printable wargame that delivers the thrill of epic fleet battles right to your tabletop, all at a cost that's just a fraction of traditional games!
This expansion set includes: Six transport ships,... [click here for more] |
Fat Dragon Games |
$4.99
|
Save 40% with this incredible bundle offer HERE.
Today is a good day to die... for the enemy crew!
BATTLEFRONT VALKYRIE™ is a groundbreaking 3D printable wargame that delivers the thrill of epic fleet battles right to your tabletop, all at a cost that's just a fraction of traditional games!
All models are optimized for printing on FDM... [click here for more] |
Fat Dragon Games |
$24.99
|
Save 40% with this incredible bundle offer HERE.
Today is a good day to die... for the enemy crew!
BATTLEFRONT VALKYRIE™ is a groundbreaking 3D printable wargame that delivers the thrill of epic fleet battles right to your tabletop, all at a cost that's just a fraction of traditional games!
This expansion set includes: Terran C-7A Light Cruiser... [click here for more] |
Fat Dragon Games |
$4.99
|
Save 40% with this incredible bundle offer HERE.
Today is a good day to die... for the enemy crew!
BATTLEFRONT VALKYRIE™ is a groundbreaking 3D printable wargame that delivers the thrill of epic fleet battles right to your tabletop, all at a cost that's just a fraction of traditional games!
This expansion set includes:
LARGE SPACE STATION... [click here for more] |
Fat Dragon Games |
$4.99
|
A 3D model file representing the Confederate gunboat CSS Little Rebel. She served as the flagship of the Confederate River Defence Fleet. After participating in key battles like Plum Point Bend and Memphis, she was captured by Union forces, repaired, and served as USS Little Rebel until the end of the Civil War.. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.78
|
A 3D model file representing the Confederate ironclad CSS Muscogee. Construction began in late 1862 at the Columbus Navy Yard in Columbus, Georgia. Originally designed as a sternwheel-powered ironclad, the ship proved too heavy to launch on its first attempt in January 1864. This model represents the ship as originally designed (LFG’s CSS Jackson, LFG3D112 represents the redesigned ship). Two versions... [click here for more] |
Long Face Games |
$3.78
|
A 3D model file representing the Confederate casemate ironclad CSS Montgomery. She was one of three large ironclads built at Montgomery, Alabama. Construction was started in late 1862. She was launched the following year but was never completed. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.78
|
STL file for SLA printers.
Dronikas a robot invasion force.
-INFANTRY
-SPEEDER
-GOAT (LASER and ROCKET turrets)
Space ship doesn't have a scale. it's about 60mm. You can easily resize it.
... [click here for more] |
IliadaGameStudio |
$7.00
|
This set of STL files was designed for SLA printers, with your gaming tables, dioramas, and Hot Wheels track models in mind. Scale 1:64. Thi set contains garage tools and 5 cool motors for your conversions. ... [click here for more] |
Voxelhouse |
$2.99
|
You've ever dream of playing big scale battles with rich sceneries and city ! With these 14 buildings, you will be able to build a huge city with enough variation on the board !
Those could be used for north america from the french indian war to the american civil war
... [click here for more] |
Thenainblanc Studio |
$15.00
|
A 3D model file representing the Confederate casemate ironclad CSS Virginia. Built upon the hull of the USS Merrimack, she was the first Confederate ironclad warship and fought against the USS Monitor at Hampton Roads in the first naval battle between ironclad warships. Two variants are included, one as shown and one with the boa area planked in. The model is scaled to 1/600, and prints well at 1/1200... [click here for more] |
Long Face Games |
$3.78
|
Midgard Heroic Battles 3D STLs – Personal Use (to print a few sets for yourself or a club)
This is a bundle of 5 STL files needed to 3D print the following for Midgard Heroic Battles published by Reisswitz Press.
Half Spear Throw Ruler (60 x 15 x 12mm)
One Spear Throw Ruler (120 x 15 x 12mm)
Two Spear Throw Ruler (240 x 15 x 12mm)
Charging or Winning Marker (20 x 25mm)
Shot Marker (20... [click here for more] |
Mogsymakes |
$7.56
|
Hex based terrain boards with village and farm terrain for creating a (1/285, 6mm) 3d battlefield.
Each tile is a large hexagon made up of smaller 1.93 inch (49 mm) hexagons. This is the largest Hexagon tile that can fit on a 220 mm print bed. If you have a larger print bed you can scale them by 103.6% to achieve 2 inches.
There 7 different tiles using 6 different building models. Roofs are printed... [click here for more] |
Two Inches of Felt |
$5.00
|
santiago de cuba ships , there is a single zip file containing all the models in the collection
There are now 2 seperate zip files , one with ship names on slightly wider bases and without names on the origional bases
Spanish
AC01 Infanta maria teresa 46.22mm length for 1/2400
AC02 Vizcaya 46.22mm length for 1/2400
AC03 Almirante Oquendo 46.22mm length for 1/2400
AC08 Cristobal Colon 61.25mm... [click here for more] |
Twylite Games |
$10.08
|
A 3D model file representing the Confederate casemate ironclad CSS Arkansas. One of the most famous ships of the war, Arkansas fought the Union warships Carondelet, Queen of the West and Tyler, ran past the Union fleet at Vicksburg and fought at Baton Rouge before being scuttled by her crew in August 1862. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.78
|
This set of STL files was designed for FDM and SLA printers, with your gaming tables, dioramas, and Hot Wheels track models in mind. We are introducing laser-cut files for the workshop walls as an additional option. Scale 1:64. The car and human figure are not included, they are only for scale representation. ... [click here for more] |
Voxelhouse |
$3.99
|
A 3D model file representing the Union sloop of war, USS Pawnee. She was commissioned in 1860 and served with the Atlantic Blockading Squadron in 1862. Her most conspicuous action was participation in the abortive assault on Port Royal in October of that year. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.78
|
NEW 2nd EDITION!
THE ERA OF 3D PRINTABLE WARGAMES IS HERE!
World War Tesla™ is an alternate-history wargame by James M. Ward (author of TSR's Gamma World, Deities & Demigods, and Metamorphis Alpha) and Thomas A. Tullis, where Nikola Tesla’s more radical ideas such as death rays and force fields have come to fruition, changing... [click here for more] |
Fat Dragon Games |
$19.99 $10.00
|
For your dioramas or gaming table. Designed for SLA printers. You can scale them down by 80% to 85% for 1/64 scale!
... [click here for more] |
Voxelhouse |
$3.99
|
Includes 8 different variations of 1-4 Fir Trees
Easily printed on an FDM printer with no supports and 10% infill.
I usually print at 0.24 layer height and 1-2 line width for walls.
The scale is suitable for 6mm and 12mm as is, could be scaled to 2mm and 15mm.
Painted trees with 12mm M4 Sherman for scale:
All 8 unique sculpts unpainted:
How looks from above:
... [click here for more] |
Two Inches of Felt |
$5.00
|
For your dioramas or gaming table. Designed for SLA printers. You can scale them down by 80% to 85% for 1/64 scale!
... [click here for more] |
Voxelhouse |
$2.99
|
Hex based terrain boards with hill and road features for creating a 3d battlefield.
Each tile is a large hexagon made up of smaller 1.93 inch (49 mm) hexagons. This is the largest Hexagon tile that can fit on a 220 mm print bed. If you have a larger print bed you can scale them by 103.6% to achieve 2 inches.
Hills slope up in 5 and 10 mm increments. Tile risers can be used to raise any tile by 10... [click here for more] |
Two Inches of Felt |
$10.00
|
You've ever dream of playing big scale battles with rich sceneries and city ! With these 29 buildings, you will be able to build a huge city with enough variation on the board !
These are suitable for 18th century to WW2 era wargaming table. You will find many different houses and churches in this bundle
... [click here for more] |
Thenainblanc Studio |
$20.00
|
Hex based terrain boards with hedgerow features for creating a 3d battlefield.
Each tile is a large hexagon made up of smaller 1.93 inch (49 mm) hexagons. This is the largest Hexagon tile that can fit on a 220 mm print bed. If you have a larger print bed you can scale them by 103.6% to achieve 2 inches.
I also sell tree models that are designed for these terrain boards.
Other HexTile Packs:
Hills... [click here for more] |
Two Inches of Felt |
$5.00
|
A 3D model file representing the Confederate casemate ironclad CSS Milledgeville. She was built at Savannah, Georgia. Construction was started in 1863. By December 1864 she was near completion but was threatened by Union troops so she was burnt on the 21st to avoid capture. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.78
|
For your dioramas or gaming table. Designed for SLA printers. You can scale them down by 80% to 85% for 1/64 scale!
... [click here for more] |
Voxelhouse |
$2.99
|
This STL pack contains the files for 6 Valtoris ships plus fighters as a starter fleet for use in your games of Ironclads of Ferrosia, they can of course be used in other similar game systems.
Files included...
Valtoris Battleship Valtoris Carrier Valtoris Cruiser Valtoris Destroyer Valtoris Frigate Valtoris Submersible Valtoris Submersible (submersed) Valtoris Fighter Stand ... [click here for more] |
Mac |
$4.00
|
This STL pack contains the files for 6 Zephyros ships plus fighters as a starter fleet for use in your games of Ironclads of Ferrosia, they can of course be used in other similar game systems.
Files included...
Zephyros Battleship Zephyros Carrier Zephyros Cruiser Zephyros Destroyer Zephyros Frigate Zephyros Submersible Zephyros Submersible (submersed) Zephyros Fighter Stand ... [click here for more] |
Mac |
$4.00
|
A 3D model file representing the Soviet WW2 gunboat Amethyst. She was originally the WW1 German destroyer A32. Sunk during Operation Albion in 1917 she was salvaged and became the Estonian Sulev, and hem seized by the Russians in 1940 when she became the Amethyst. The model is scaled to 1/600 and prints well at 1/300. ... [click here for more] |
Long Face Games |
$3.78
|
A 3D model file representing the Union casemate ironclad USS Eastport. She was captured in an incomplete state from the Confederates in mid 1862 and entered US service in October of that year. She operated on the Mississippi until April 1864 when she struck a mine. Attempts to salvage her failed and she was blown up to avoid capture. The model is scaled to 1/600, and prints well at 1/1200 on a resin... [click here for more] |
Long Face Games |
$3.78
|
Extending our line of wargame buildings, we are bringing to your table a complete ww2 Russian Village focusing on the WWII. Designed in 1/100 scale, they can also be used on the 1/300 scale. There are 5 buildings and some accessories to print in 3D and put on your game table!
Get to know our products!
This set contains the spare parts:
- 1 church with two roofs type
- Barn
- 3 different... [click here for more] |
Voxelhouse |
$6.99 $4.99
|
3D Print Ancient galleys for naval wargames. 1/600 scale. This set contains:
- 2 biremes types
- 3 triremes types
- 1 quinquireme
- 1 merchant boat (Roman) ... [click here for more] |
Voxelhouse |
$5.99
|
Includes 10 different lengths of hedgerow to create a modular bocage battlefield. These are best suited for 6mm but can be used as bushes for 10mm, pictures of both included.
Easily printed on an FDM printer with no supports. I recommend only 2 walls and 15 % infill to print. Use your fastest speed settings as you will not be able to notice imperfections in the leaves.
6mm:
... [click here for more] |
Two Inches of Felt |
$5.00
|
An exclusive set of STL files featuring various drums and fuel cans for your dioramas or gaming table. Designed for SLA printers. You can scale them down by 80% to 85% for 1/64 scale! ... [click here for more] |
Voxelhouse |
$2.99
|
Upgraded version of the construction cranes for tabletop miniature sceneries. Suited for tabletop gaming, dioramas and low poly gaming, design, animation. Includes 6 models (19 individual parts), high attitude field cranes, one short overhang cranes and a modular extenders. Ideal for construction modern, interwar and scifi settings over plastic, paper and cardboard sceneries.
SPECS:... [click here for more] |
MuM |
$18.00
|
You've ever dream of playing big scale battles with rich sceneries and city ! With these 28 buildings, you will be able to build a huge city with enough variation on the board !
... [click here for more] |
Thenainblanc Studio |
$20.00
|
This product is a ZIP archive containing seven (7) STL files suitable for home 3D printing. Included are:
Nagaraja-class Carrier
Anaconda-class Battleship
Mamba-class Battlecruiser
Diamondback-class Heavy Cruiser
Cottonmouth-class Light Cruiser
Viper-class Destroyer
Black Adder-class Frigate
Suitable for use with Starmada,... [click here for more] |
Majestic Twelve Games |
$10.00
|
Morningstar’s Seven Years’ War collection contains a wide variety of over two HUNDRED 1/600th scale STLs for aspiring generals across the continent! Inspired by Mike Nichols’ 6mm Seven Years’ War campaign articles in Miniatures Wargames in the early 00s, these are unit bases intended for Warmaster/DBA-style 40mm by 20mm bases. Many are also suitable for the American War of Independence... [click here for more] |
Morningstar Productions |
$10.00
|
This product is a ZIP archive containing seven (7) STL files suitable for home 3D printing. Included are:
Daitenshi-class Battle Carrier
Raijin-class Battleship
Tetsukabe-class Battlecruiser
Izanagi-class Missile Cruiser
Hayabusa-class Destroyer
Dokujin-class Escort
Chouwa-class Light Carrier
Suitable for use with Starmada,... [click here for more] |
Majestic Twelve Games |
$10.00
|
This product is a ZIP archive containing seven (7) STL files suitable for home 3D printing. Included are:
Indomitable-class Battleship
Majestic-class Battlecruiser
Concordant-class Carrier
Belligerent-class Heavy Cruiser
Vailant-class Light Cruiser
Furious-class Destroyer
Swiftsure-class Frigate
Suitable for use with Starmada,... [click here for more] |
Majestic Twelve Games |
$10.00
|
European Builidings Facilities for your WW2 6mm wargame tables. This set contains the following products
Generic Factories
Red October Plant
WW2 Aereodrome
"D" Day Set
Japanese Bunkers
WW2 Radars
River Bridges
Stalag Cuildings
European Train Station
Tunnels Entrance
Exclusive V2 Launching Site
1/300 SCALE (6MM) GREAT STL FILES FOR YOUR SLA PRINTER!
Discover... [click here for more] |
Voxelhouse |
$9.49 $4.29
|
A set of 3D model files representing the seven ships of the Union’s “City” class of casemate ironclads, of which the Cairo was the first. The ships of the class fought on the Mississippi, two of the ships, Cairo and Baron de Kalb, were sunk by mines on the Yazoo River. Six models are included covering the standard design (USS Cairo) and two variants, USS Mound City, and USS Cincinnati. Each ... [click here for more] |
Long Face Games |
$3.78
|
Moon Cresta is a game that simulates military combat on the Lunar surface. It uses the basic rules of our Iron Cross wargame system. Players represent the forces of the US and the Soviet Union, at the height of the Cold War and with the space race taking place.
In this alternative world game, there are bases on the Moon, American and Russian, and combat between these forces occurs almost daily. There,... [click here for more] |
Voxelhouse |
Pay What You Want
|
This product is a ZIP archive containing seven (7) STL files suitable for home 3D printing. Included are:
Oratorio-class Heavy Carrier
Requiem-class Battleship
Concerto-class Battlecruiser
Forte-class Heavy Cruiser
Aria-class Light Cruiser
Scherzo-class Destroyer
Sonata-class Frigate
Suitable for use with Starmada,... [click here for more] |
Majestic Twelve Games |
$10.00
|
This product is a ZIP archive containing seven (7) STL files suitable for home 3D printing. Included are:
Eagle-class Battleship
Condor-class Carrier
Raptor-class Battlecruiser
Talon-class Heavy Cruiser
Kestrel-class Light Cruiser
Kite-class Destroyer
Harrier-class Frigate
Suitable for use with Starmada, Full... [click here for more] |
Majestic Twelve Games |
$10.00
|
A 3D model file representing the Confederate casemate ironclad CSS Charleston. She served as the flagship of the Charleston squadron until she was destroyed to prevent capture in 1865. The model is scaled to 1/600, and prints well at 1/1200 on a resin printer. ... [click here for more] |
Long Face Games |
$3.78
|
Includes 8 different variations of a deciduous woodlands.
Easily printed on an FDM printer with no supports and 10% infill.
I usually print at 0.24 layer height and 1-2 line width for walls. Takes <1 hr per piece on my neptune 4.
The scale is suitable for 6mm and 12mm as is, could be scaled to 2mm and 15mm.
Painted woods with 6mm panzer IV for reference:
All 8 unique sculpts unpainted:
Closeup... [click here for more] |
Two Inches of Felt |
$5.00
|
An STL file representing the Confederate casemate ironclad CSS Tennessee. She was built to defend the port of Mobile and was the flagship of the squadron based there. She fought at the Battle of Mobile Bay in August 1864. She was captured and later served as the USS |Tennessee in the Mississippi. The model is scaled to 1/600 and prints well at 1/1200 ... [click here for more] |
Long Face Games |
$3.78
|
To give it the proper designation, the F-71T Saint-Germain-de-Monte, or "Monty" for short, is the second tank design by Apocrypha_Now. Going back to the early days of tank development, this chonky little tank is heavily influenced by the classic Renault FT17. Features a ridiculously large front wheel, rear skid and cast turret to capture the vibe of Great War & Interwar tanks. Lots of possibilities... [click here for more] |
Apocrypha_Now |
$1.89
|
Log In 
