Title |
Publisher |
Price |
 Soviet Bronekater BK 1124 is a collection of 3D printable files to make the BK 1124 armoured river boat in 28mm scale. Heavily armed with tank turrets and machine guns and motorized by strong engines they played a significant role in many major battles, securing bridgeheads and ferrying troops, e.g. at Stalingrad, the Dnepr, Kerch, Belorussia, the Visla, the Danube (Belgrad, Budapest,... [click here for more] |
Era Warfare |
$10.00
|
 Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
- dwarfen roads
- columns
- rock
- gate
- big dwarfen door
- dwarfen house
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm... [click here for more] |
ESLO |
$15.95
|
 Whether on a forward post or in a heavily defended battle line, the sandbag positions provide good cover for light projectiles and shrapnel.
The pack contains stl files for:
•1 half oval sandbag emplacements without base
•1 half oval sandbag emplacements with base
•1 angular sandbag emplacements without base
•1 angular sandbag emplacements with base
Models are designed... [click here for more] |
NEOPHIR |
$4.24 $3.64
|
Create your own starship deckplans with these corridor tiles! Allows the construction of starship or other sci-fi corridors. Includes high and low detail versions, two wall variants, a doorway, single and double tile variants, including intersections.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect... [click here for more] |
2nd Dynasty |
$11.24
|
Expand your Starship deck plans with these lift and platform tiles, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free... [click here for more] |
2nd Dynasty |
$1.49
|
This is a small Guard House or a Toll Booth. Made in two pieces, the building and the roof.
This goes great with The Wizard's Tower as a minions small hut or with the Bridge or Walls sets as a Toll Booth or Guard House.
This also includes some altered files to use it as the entrance to your Wizard's Tower.
If you like this check out more things for sale.
... [click here for more] |
Devious Games |
Pay What You Want
|
This Smithy fits inside Sir Cireneg's Border Fort against a wall.
It includes an exterior forge area and a shop area. Each can be used separate from each other adding to the modularity of this piece.
It also features an anvil, bellows and multiple tables with weapons or tools on them. ... [click here for more] |
Devious Games |
$5.00
|

This figures are a Box of 6 British line infantry in the 18th century. The equipment of the figures is especially suitable for the Seven Years War and the French Indian War. The size corresponds to the usual 28mm scale and can easily be reduced to 1/72 (this has already been tested).
In this collection you get 6 detailed Wargame STL Files. -Infantryman marching -Infantryman holding -Infantryman... [click here for more] |
Warprinter |
$24.00
|
 This STL files for 3D Printers will create a hex pattern for XPS foam. Each hex should be about 1/3 of an inch wide. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
7 Small Ruins, great to scatter around the tabletop as an abandoned, ruined, pillaged town. ... [click here for more] |
Devious Games |
$4.00
|
DRAGONLOCK™ Miniatures are hyper-detailed sculpts specifically designed to be the easiest printing miniatures you can buy for your 3D printer, and they print with NO SLICER SUPPORTS! Best of all, a standard 28mm mini costs UNDER TEN CENTS to print, and we support our 3D printer products with a complete Youtube video series that teaches you how to print at home... [click here for more] |
Fat Dragon Games |
$9.99
|
You will get all files to print this 2 ships (historic and fantasy).
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65... [click here for more] |
ESLO |
$19.95
|
From the team at Aether Studios comes the Electro Rail Trains sets! Included in this you will find 71 .stl files. Everything you need to get started on your first electro rail train is here. Expand your Electro Rail Empire with more sets from Aether Studios. This 3d printable terrain includes generous fighting spaces, a strong sci-fi influence throughout, and easy connect-ability.
RECOMMENDED... [click here for more] |
Aether Studios |
$3.99 $2.00
|
 this STL Files set included:
5 straight: without manhole, with crater, with poller, and teeth
2 curves: 45 and 90 degrees
2 crossroads: X and T
This parts are included:
90_kopfsteinpflaster_fix..stl
T_kopfsteinpflaster_strasse_fix.stl
kopfsteinpflaster_strasse2_fix.stl
kopfsteinpflaster_strasse45_fix.stl
X_kopfsteinpflaster_str_fix.stl... [click here for more] |
ESLO |
$17.95
|
 This model pack contains 8 armored trucks. RAR file contains all models individually. SPECS: This product contains .STL file only. This model is scaled for 8mm tabletop games, also compatible for scaling down to 6mm. Compatible with common ABS and PLA printers.
... [click here for more] |
MuM |
$10.00
|
 This model pack contains Flame Thrower, Minigun and Rocket Launcher Turret. RAR file contains all models individually. SPECS: This product contains .STL file only. This model is scaled for 8mm tabletop games, also compatible for scaling down to 6mm. Compatible with common ABS and PLA printers.
... [click here for more] |
MuM |
$5.00
|
 This set contains a long courtine with an artillery embrasure matching to the Fortress in Vauban's star shape style, comes in two versions with different inner wall.
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$3.00
|
 This model pack contains Khangal twin Minigun and Rocket Launcher with Kharabash Heavy Coordinator tanks. RAR file contains all models individually. SPECS: This product contains .STL file only. This model is scaled for 8mm tabletop games, also compatible for scaling down to 6mm. Compatible with common ABS and PLA printers.
... [click here for more] |
MuM |
$5.00
|
 This model pack contains Syrtlan Military Firefighter with Kharabash Mortar and Bulldozer tanks. RAR file contains all models individually. SPECS: This product contains .STL file only. This model is scaled for 8mm tabletop games, also compatible for scaling down to 6mm. Compatible with common ABS and PLA printers.
... [click here for more] |
MuM |
$5.00
|
 3D Printable Oxygen Extractor:
includes individual oxygen tank
designed for 20mm miniatures, but can be re-scaled to fit your game. For example if you want to use them for 28mm, simply scale them up by 140%
... [click here for more] |
Project Mobius 3D Design |
$4.37
|
 This set contains a so called "Ravelin" matching to the Fortress in Vauban's star shape style,
Ravelins are used to protect the wall, "Courtines" of a fortress. Of course it can perfectly used as bastion in ACW or other scenarios
The set consists of STL-Files, made for 3D printing, to be used for table-top-gaming scale 28mm and 25mm (1:64 and 1:72) ... [click here for more] |
Xerbath |
$6.00
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like... [click here for more] |
Fat Dragon Games |
$2.99
|
 You will get all files to print this items.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75 - 80% 28mm = 100 % (0 Railroad)
If you need a printed... [click here for more] |
ESLO |
$5.95
|
 3D Printable Communication Tower:
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [click here for more] |
Project Mobius 3D Design |
$4.37
|
 3D Printable Hibonite Mining Facility:
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [click here for more] |
Project Mobius 3D Design |
$4.37
|
Welcome to Future Worlds Landscapes
Landscapes is the first truly modular, scaleable and system agnostic 3D printable terrain system. It gives you the ability to quickly build terrain featurs such as hills, cliffs, rivers and arroyos for your wargames and RPGs. These features can be pulled apart and then rebuilt into completely different configurations to suit... [click here for more] |
Arid Hills Gaming |
$15.00
|
 3D Printable Water Treatment Facility:
designed for 28-32mm miniatures, but can be re-scaled to fit your game.
... [click here for more] |
Project Mobius 3D Design |
$4.37
|
Create your own starship deckplans with these tiles! Allows the construction of machinery perfect for an engineering section, computer server room or the like.
Compatible with the OpenLOCK system created by and available at Printable Scenery. These tiles are the commercially available version of the kickstarter tiles.
Please note that these are STL files only! You will need a 3D... [click here for more] |
2nd Dynasty |
$5.99
|

'"The Bell became known after it first appeared in 1951, mission of the so-called ZauberKommando, the occult and magic division of the Werwolfkorp. The Bell was an experimental weapon that had been developed since 1949 in Lab 7, one of the most closed and secret Nazi installations. The Bell was employed in an attack on a Soviet observation post and in less than 10 minutes reduced the site to... [click here for more] |
Voxelhouse |
$2.99
|

Human Infantry Stands for Landships wargame. Infantry and Artillery in 1/300 scale
Buy Landships Game!... [click here for more] |
Voxelhouse |
$1.29
|
 Necroplex 3D Printable Crafting Blocks
Necroplex is a series of 3D printable models designed to build modular walkways and cityscapes for use in tabletop miniature games.
We designed everything to get more terrain on your table with the least possible printing time. Necroplex combines 3D printable pieces with common and affordable terrain building materials, such as foam core, wooden... [click here for more] |
Cold Brew Studios |
$4.95
|
 Necroplex 3D Printable Crafting Blocks
Necroplex is a series of 3D printable models designed to build modular walkways and cityscapes for use in tabletop miniature games.
We designed everything to get more terrain on your table with the least possible printing time. Necroplex combines 3D printable pieces with common and affordable terrain building materials, such as foam core, wooden... [click here for more] |
Cold Brew Studios |
$7.95
|

The Megahexes 1.5” Base Set is a set of 16 3D-printable STL models designed for games using a hex grid.
The hexagons are 1.5” center-to-center, and the hexagon sides are 0.866” long. All parts will fit on almost any 3D printer buildplate. A seven-hex tile (the largest in the set) requires a build footprint of approx. 4-3/8” x 4-5/8” (110mm x 115mm).
The... [click here for more] |
Decagon Design |
$10.00 $7.00
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like and... [click here for more] |
Fat Dragon Games |
$9.99
|

"The steam tanks were units built from the concept of the Landships. They are cheaper and of easy production, with good armor and reasonable firepower. Its conception was given to meet a need for faster fighting, especially against mechs. There are two types of tanks: light and heavy, the latter can not be considered as Landships,... [click here for more] |
Voxelhouse |
$1.99
|

The workshop is a special set for your wargame table or even diorama. Developed for 28mm scale (1/64) it can be used in various game systems.
- Barrels
- Crane
- Tools
- Air Compressor
- Cylinders
- Hydraulics Jacks
- Stair
- Wagon
For 18 mm scale - 70% of original size ... [click here for more] |
Voxelhouse |
$4.99
|
 You will get all files to print this ship.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
dragonheads_fix.stl
ruder_fix.stl
sail.stl
pole_mount_fix.stl
sailholder_fix.stl
shield1.stl
shield2.stl
vikinglongboat_back_fix.stl
vikinglongboat_front_fix.stl
vikinglongboat_middle_fix.stl
Minimum... [click here for more] |
ESLO |
$12.95
|
 The rocket launchers are mounted on a portable carriage. They can be set up quickly in variable positions and fight enemies in a wide radius without direct visual contact.
The pack contains stl files for:
• a rotatable missile turret on a carriage
Turrets can be exchanged with all other MK I turrets from NEOPHIR.
Models are designed for 28mm miniatures, but might be re-scaled to fit your... [click here for more] |
NEOPHIR |
$3.03
|

"The idea of a powered steam fighter began to be thought of in the military Orc circle. Creating a unit that could be swiftly and well-armed with mobility in various terrains made the orc engineers design a new type of unit that corresponded to these longings.
Many studies and prototypes were made until the so-called Tin Boy emerged, a mech manned by about 5 orcs able to intervene quickly in combat... [click here for more] |
Voxelhouse |
$1.19
|

Landships or Land Ironclads are specially built vehicles for ground combat. His philosophy was based on taking the enemy the maximum of destruction and instilling terror, in the form of war machines equipped with the most diverse types of guns and machine guns.
Driven by powerful engines fueled by aerolite steam, they are armored with a crew of about 20 to 40 soldiers. The Landships work similarly... [click here for more] |
Voxelhouse |
$1.19
|
The Tree of the Dead. Comes in 3 pieces that slot together.
Hollowed tree filled with skulls.
Not really much else to say about it really.
Great with the Skull Pyramid and Skull Scatter Terrain. ... [click here for more] |
Devious Games |
$0.50
|
 You will get all files to print this ship (2 Versions a open ship and a closed)
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
details_fix.stl
jpnlcvp_fix_2.stl
jpnlcvp_fix_2.stl
jpnlcvp_fix_3.stl
jpnlcvp_fix_open_1.stl
jpnlcvp_fix_open_2.stl
jpnlcvp_fix_open_3.stl
Minimum... [click here for more] |
ESLO |
$14.95
|
 Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
sheft_fix..stl
chair_fix.jpg.stl
table_fix.stl
wandrobe_fix.stl
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale... [click here for more] |
ESLO |
$6.95
|
Create your own starship deckplans with these corridor tiles! Allows the construction of starship or other sci-fi corridors. These double plate floor tiles are from the Corridors II set but can be used in combination with any OpenLOCK tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates to print clips to connect these... [click here for more] |
2nd Dynasty |
$2.96
|
This contains files to be either used separtely or in conjunction with The Wizard's Tower.
It contains the files to create a sacrificial circle either with or without candles and a number of inserts and pieces to be put in the middle.
Including:
a stone portal (open and closed)
a font,
a floating font spilling some ooze,
an altar
a pillar
and a blank insert.
It also contains 2 pieces... [click here for more] |
Devious Games |
$4.00
|
Extra modular pieces to The Wizards Tower .
Although these can be used separately to create a bridge, they are best combined with The Wizard's Tower to use them to their fuill effect.
The bridge width is large enough to accomodate a 30mm base although using as a bridge alone will allow you to widen this without major distortion to the bridge.
Prints are for personal use only. ... [click here for more] |
Devious Games |
$6.00
|
These wall Ruins are to be used in conjunction with The Wizard's Tower - The Wall but can be used separately if you wish.
It contains 9 differen types of wall ruins with differen ways to attach the more complete ones together at different angles. ... [click here for more] |
Devious Games |
$4.00
|
The Walls contains enough files so that you can buils your walls in a wide variety of ways with. Straight, with 45 or 90 degree turns either way. It also has an archway with either free standing iron or wooden gates.
Combine this with The wizard's Tower or the Wall Ruins for even more fun. ... [click here for more] |
Devious Games |
$4.00
|
 This 15mm Cyberpunk Scifi City Terrain pack contains 3D print ready stl files to create a multi level building with signs, facade decor which could be used as a Municipal Building or Health Center
Floors are stackable and signs can be placed along vertical tracks or on the buidling sides.
Base dimensions are 89mm x 72mm
Examples printed in PLA
This set introduces facades
As... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
 This set contains the basic elements for Siege works,
a sap, a sap head, sap edge, a battery and some accessories
It is kept in a dimension matching for the limited space in table-top games (and the general difficulty to mill trenches in a table) , and can easily extended by adding more 3D-prints or implementing some expansion models.
The set consists of STL-Files, made for 3D printing, to be... [click here for more] |
Xerbath |
$15.00
|