Title |
Publisher |
Price |
 This STL files for 3D Printers creates a rolling pin with a windmill pattern for XPS foam. Each windmill should fill about an inch of area. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
Expand your Starship deck plans with this bridge tile set! Allows the construction of starship or other sci-fi control panels and bridge seating. Includes seven control panels, three seat variants (based and unbased), and a doorway, suitable for use with 28-32mm miniatures.
Compatible with the OpenLOCK system created by and available at Printable Scenery. You will need the basic OpenLOCK templates... [click here for more] |
2nd Dynasty |
$14.99
|
 World War One 3D armored car model . For use in designing and 3D printing. Model not scaled
The file contains a complete model of the indicated armored car:
Russo-Balt Armored Car
Please note: this is an STL or OBJ ONLY and not the physical product. Requires a 3D printer and knowledge of 3D printing to use. Components included are shown in the first image, other... [click here for more] |
GREENMNIATURES |
$3.00
|
 This is a model I created to fill in a gap in the UPF order of battle. There was no minature produced for the UPF Minelayer, athough the Sathar Cutter matches the silhouette on the game counter. This model was created based on the counters from the original game, but doesn't match it exactly although it shares the same basic shape.
It was produced at the same scale as the UPF Destroyer and UPF... [click here for more] |
New Frontier Games |
$0.99
|
 Telecommunications tower set for establishing civilian grade wireless communication and scaring you enemies with overrated microwaves! This model set contains spaceframe structure bits and microwave antennas for building and customising communication arrays. RAR file contains all models individually. SPECS: This product contains .STL files only. %100 scaled models print... [click here for more] |
MuM |
$6.00
|
 World War One 3D weapons model . For use in designing and 3D printing. Model not scaled
The file contains a complete model of the indicated weapons:
Lewis Gun
Hotchkiss Mie 14
Villar Perosa M15
Please note: this is an STL or OBJ ONLY and not the physical product. Requires a 3D printer and knowledge of 3D printing to use.... [click here for more] |
GREENMNIATURES |
$3.00
|
 The Necroplex Dice Tower, a towering bastion of industrial decay and randomness! Prints in two parts, no supports needed, and small print bed friendly.
The top chimney is sized to fit a standard D20, or remove the top to roll fistfulls of dice at once.
... [click here for more] |
Cold Brew Studios |
$2.95
|

"This strange vehicle was a vehicle, manufactured by the famous Krupp company, and the idea was to be a one-man scouting vehicle. Because it is a vehicle of reconnaissance, its main function is not one of armor proper but one of a unit of fast attack, mainly against infantry. After the armistice the vehicle prototypes from recovered... [click here for more] |
Voxelhouse |
$2.99
|

Uncle Tony Auto Spare Parts is one of the most versatile and reputable stores in the automotive customization market. We are exclusive representatives of Cosmos Motors, a company with a tradition of over 20 years in the parts market in general. We offer the best products for the most demanding pilots and who want to have the best performance in competitions and for the private-public, who want an... [click here for more] |
Voxelhouse |
$5.99
|
 Set of 6 weapons for late war Volkssturm Militia. It includes: Single shot flamethrower (ESFW), MG 08/15; french Lebel gun; mauser k98 and two rare volkssturm gewehrs. Models are in .stl format; and are scaled to fit 1/56 wargaming miniatures. I recommend using DLP resin printer like anycubic photon for printing. File format - stl.
Model is for personal use only. ... [click here for more] |
Just Some Miniatures |
$5.00
|
 The Megahexes 1.5” Expansion Set 1 has 41 3D-printable STL models that enhance the Megahexes 1.5” Base Set, adding risers to support elevated terrain, some megahex-sized terrain features, and hex-to-square-grid connectors.
The hexagons are 1.5” center-to-center, and the hexa- gon sides are 0.866” long. All parts will fit on almost any 3D printer buildplate. A seven-hex tile... [click here for more] |
Decagon Design |
$10.00 $7.00
|
 The document contains the complete Cyber Ettina model. The model is prepared for 3D printing.
Please note: this is an STL or OBJ ONLY and not the physical product. Requires a 3D printer and knowledge of 3D printing to use. Components included are shown in the first image, other images are for illustration purposes only. Our reference consumer grade resin 3D printer by Formlabs or Anycubic Photon.... [click here for more] |
GREENMNIATURES |
$3.00
|
 Model 3D of modern weapons. For use in designing and 3D printing.
3D model of modern weapons. For use in designing and 3D printing. Model not scaled
The file contains a complete model of the indicated weapon:
- DKsW Heavy Machine Gun
Please note: this is an STL or OBJ ONLY and not the physical product. Requires a 3D printer and knowledge of 3D printing to use. Components... [click here for more] |
GREENMNIATURES |
$2.00
|
 Model 3D of modern weapons. For use in designing and 3D printing.
3D model of modern weapons. For use in designing and 3D printing. Model not scaled
The file contains a complete model of the indicated weapon:
- PK Machine Gun
Please note: this is an STL or OBJ ONLY and not the physical product. Requires a 3D printer and knowledge of 3D printing to use. Components included... [click here for more] |
GREENMNIATURES |
$2.00
|
 Some extensions to increase the with of the parapet walk, straight and edged ones.
Both matching to the Vauban fortress courtines and bastions, to get more room for artillery or manning of the walls.
STL-Files, both in 28mm (1:64) and 25mm (1:72) for 3D printing, ... [click here for more] |
Xerbath |
$2.00
|
 This set comes with the 28mm and 25mm STL data for a round bastion, matching to the Fortress in Vauban style. You will get data for a bastion smooth and with embrassures for artillery. ... [click here for more] |
Xerbath |
$3.00
|
 This pack contains 13 printable STL files to create bases and movement trays for 15mm miniatures. Included base sizes are 15x2mm and 20x2mm; movement trays can accommodate 2, 3, 4, and 5 figures mounted on their respective 15mm or 20mm bases. All bases and trays contain recesses for optionally installing rare earth magnets to keep figures securely mounted to movement trays during gaming sessions.
... [click here for more] |
Legionnaire Games |
$4.95 $2.48
|

Uncle Tony Auto Spare Parts is one of the most versatile and reputable stores in the automotive customization market. We are exclusive representatives of Cosmos Motors, a company with a tradition of over 20 years in the parts market in general. We offer the best products for the most demanding pilots and who want to have the best performance in competitions and for the private-public, who want an... [click here for more] |
Voxelhouse |
$7.99
|
 3D models (in STL format) for miniature figure based designed for home 3D printing on standard Fused Deposition Modelling (FDM) printers.
This is the set of miniature figure bases is intended as a 3D printed direct alternative to industrial injection moulded bases. To achieve a suitable substitute for an injection moulded base these bases have open/hollow backs to the degree to which that is... [click here for more] |
Riphaeus |
$14.95
|
3D printable dug-in markers that you can print out at home and use them as a cheaper, but still visually pleasing, alternative on your tabletop.
These models were designed and tested by the two artists of Black Scrolls Games. You can print out these models on your own 3D printer or you can take them to a local library or a shop that offer this kind of service. They are ideal for... [click here for more] |
Black Scrolls Games |
Pay What You Want
|
 This 15mm Cyberpunk Scifi City Terrain pack contains 3D print ready stl files to create signs for other Packs in the series. These signs are made to fit the slots and tabs of the other buildings released and are double sided. Also included is a Prone Token for gaming use. ... [click here for more] |
Doctor Merkury's Lab |
$1.00
|
 This battlefield behemoth is an example of one of the US Army’s pre -war main battle tanks and one of the most powerful vehicles to ever rumble through the wasteland. Powered by a nuclear engine, its single turret design boasts a twin pair of heavy duty 140mm main cannons which it can use to demolish all but the most formidable of assailants in a single salvo.
Weighing in at a monster 60 tons, its... [click here for more] |
Modiphius |
$24.99
|
 This 15mm Cyberpunk Scifi City Terrain pack contains 3D print ready stl files to create a multi level building with signs, facade decor as well as pieces of scatter terrain to represent a Purchase Mart or Distribution Center.
Floors are stackable and signs can be placed along vertical tracks or on the buidling sides.
Base dimensions are 101.5mm x 72mm
The following examples were printed in PLA... [click here for more] |
Doctor Merkury's Lab |
$10.00
|
 “The XVB02 ‘Vertibird’ is a VTOL ("Vertical Take Off and Landing") craft with an extremely durable armoured fuselage and can be armed with a variety of offensive weapons and defensive countermeasures. This is the most advanced aircraft of its kind ever developed, and the military hopes to press them into service by 2085.” - Museum of Technology Washington.
The Brotherhood of Steel make good... [click here for more] |
Modiphius |
$24.00
|
 This is one of my early models and the first that is not originally intended for the Star Frontiers RPG. I tackled this at the request of a friend. He posted the deck plans for a ship as part of a Free Map Friday endeavor back when Google+ was still new. You can now find that map in the Free Downloads section on the DWD Studios website. When he posted it, it came with a question: "I wonder what... [click here for more] |
New Frontier Games |
$0.99
|
Data Targets are a set of science fiction miniatures objective markers for 3D printing. They have been designed for Corvus Belli's Infinity and its Infinity Tournament System (ITS) mission pack, but work well for Games Workshop's Warhammer 40,000 and a wide range of other games.
UPDATES
2017/06/12: There are a few changes... [click here for more] |
Rocketship Games |
$4.00
|

Some Painted Samples
Six bunkers for your Landships or WW1/WW2 table! Easy to 3dPrint! Have fun! This set have 6 types of bunkers!
Buy Landships Game!... [click here for more] |
Voxelhouse |
$2.99
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. On the old Federation Ships box that included the mini, this model was labeled "some assembly required" and it came in 10 different pieces (2 for the fuselage and 8 engines). The model provided has them all combined into a single piece.
It was produced at the same scale as the original minature... [click here for more] |
New Frontier Games |
Pay What You Want
|

"The steam tanks were units built from the concept of the Landships. They are cheaper and of easy production, with good armor and reasonable firepower. Its conception was given to meet a need for faster fighting, especially against mechs. There are two types of tanks: light and heavy, the latter can not be considered as Landships,... [click here for more] |
Voxelhouse |
$1.99
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 25mm (1) tall when printed. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. It still has its printing supports attached. The download file has a smoother surface than the model... [click here for more] |
New Frontier Games |
Pay What You Want
|
 This is a model I created to fill in a gap in the UPF order of battle. There was no minature produced for the UPF Destroyer which is supposed to be just slightly larger than the UPF Frigate. This model was created to the same scale as the UPF Frigate model and, based on the counters from the original game, with the same basic design but longer, with an external cannon, and three engines instead of... [click here for more] |
New Frontier Games |
$0.99
|
![Endless: Fantasy Tactics - Dragoon [F] (STL)](https://dtrpg-public-files.s3.us-east-2.amazonaws.com/images/2597/310001-thumb140.jpg) On The Lamb returns!
The Dragoon has always been our most popular miniature, and now she is back in 3D printable format.
We reccomend using a resin printer for the best results. ... [click here for more] |
On The Lamb |
$6.00
|

Landships or Land Ironclads are specially built vehicles for ground combat. His philosophy was based on taking the enemy the maximum of destruction and instilling terror, in the form of war machines equipped with the most diverse types of guns and machine guns.
Driven by powerful engines fueled by aerolite steam, they are armored with a crew of about 20 to 40 soldiers. The Landships work similarly... [click here for more] |
Voxelhouse |
$1.19
|
 This model was created by me to fill in a gap in the order of battle as no sathar destroyer miniature was ever produced. The model is a representation of the ship detailed in the Sathar Destroyer Technical Manual and all the surface features of the model correspond to the structure of the ship detailed i that manual.
The model was produced at 1/3000th scale. As such the minature stands 53.7mm (2.1")... [click here for more] |
New Frontier Games |
$0.99
|
 This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 40mm (1.56") tall when printed and is 48mm (1.9") wide. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. The stand base is 1" in diameter. The download file has a smoother surface... [click here for more] |
New Frontier Games |
Pay What You Want
|
 This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 50mm (2") tall when printed. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. The stand base is 1" in diameter. The download file has a smoother surface than the model usefor... [click here for more] |
New Frontier Games |
Pay What You Want
|
 You will get all files to print this ship. Delivered in downloadable .stl file format for your 3D Home printer.
This parts are included:
3xmast_fix.stl
3x_pole_moust_fix.stl
big_sail_fix.stl
pole_mount_fix.stl
pinacce_front_1_fix.stl
pinacce_front_1_fix_2parts.stl
pinacce_front_2_fix.stl
pinacce_middle_fix.stl
rigging2_2parts_fix.stl
rigging2_fix.stl
rigging_fix.stl
ropeholder_fix.stl
shipwheel_fix.stl
shipwheel_holder_fix.stl
small_sail_fix.stl
Minimum... [click here for more] |
ESLO |
$18.45 $15.95
|
 This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 85mm (3.35") tallwhen printed. Tested on both FDM and SLA printers.
Here's a picture of the model printed with my SLA printer (the body was printed hollow as a test which is why it's not as dark as the bow of the ship). This... [click here for more] |
New Frontier Games |
Pay What You Want
|
 This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 135mm (5.3") tall when printed. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. The stand base is 1" in diameter. The download file has a smoother surface than the model used... [click here for more] |
New Frontier Games |
Pay What You Want
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like... [click here for more] |
Fat Dragon Games |
$9.99
|
 You will get all files to print this items.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75... [click here for more] |
ESLO |
$12.95
|
Pilots Chair And Console Objective Marker. Forget boring old disk markers, get an objective marker that looks good and makes sense.
This console has been designed to be easily printed with minimal supports and to have lots of details for the painters out there.
It wouldn't look out of place in any bunker, spacecraft or building and makes a great objective. Highly detailed and functional... [click here for more] |
SPQRWargames |
$1.99
|
 Friend, where will you and your loved ones be when the bombs fall? Secure their future the way you want with a state-of-the-art underground vault from Vault-Tec!
You have been chosen as the designer of this critical structure, and with the Vault Walls Upgrade Pack you’ll have all you need to expand your vault with new options for walls and scenery which build on the existing... [click here for more] |
Modiphius |
$15.00
|
 Console Objective Marker. Forget boring old disk markers, get an objective marker that looks good and makes sense.
This console has been designed to be easily printed and to have lots of details for the painters out there. It wouldn't look out of place in any bunker or building and makes a great objective.
The Console is scaled for popular 25-28mm gaming systems such as AT-43, WH40K, and... [click here for more] |
SPQRWargames |
$1.75
|
 Welcome to die World of the Seven Years War! On the pictures you see printed products from a low budget resin printer. The size is exactly 28mm scale. It can be reduced very easily to 1/72. Feel free to get in contact with me!
... [click here for more] |
Warprinter |
$27.00
|
 Welcome to die World of the Seven Years War! On the pictures you see printed products from a low budget resin printer. The size is exactly 28mm scale. It can be reduced very easily to 1/72. Feel free to get in contact with me!
... [click here for more] |
Warprinter |
$24.00
|
 Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Minimum printbed needed is 15 x 15 cm and 15 cm high. Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75 - 80% 28mm = 100 % (0 Railroad)
If you need... [click here for more] |
ESLO |
$7.50
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like and... [click here for more] |
Fat Dragon Games |
$9.99
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like... [click here for more] |
Fat Dragon Games |
$14.99
|
 You will get all files to print this items.
Includes all necessary STL files to print the model on your own 3D printer. (No physical model included with your order.)
This parts are included:
Scale is for 28mm Miniatures (approx 1/48) you can rescale it:
Example Scale factor:
10mm = 40 - 45 % 15mm = 65 % (H0 Railroad) 20mm = 75 - 80% 28mm = 100 % (0 Railroad)
If you need a printed... [click here for more] |
ESLO |
$5.95
|