| Title |
Publisher |
Price |
Recon Corner is supplementary rules for our Iron Cross wargame, always bringing something new to you. In this "report," we bring rules for the Italian Army in WW2. This report brings you:
- Rules
- Exclusive Miniatures for Italian infantry in 6mm
- Exclusive Scenery "Desert Storm"
Have Fun!
PLEASE SUPPORT OUR WORK!
Take Iron Cross Core Book here! ... [click here for more] |
Voxelhouse |
Pay What You Want
|
The set of 12 spaceship miniatures as STL files for 3D printing. The set consists of 4 Battleships, 4 Cruisers and 4 Destroyers. The miniatures are in 1:10000 scale and are designed for Stars and Steel wargame by Denipher Graves (Nanofleet standard).
Miniatures for personal use only. ... [click here for more] |
Assault Publishing Studio |
Pay What You Want
|
Recon Corner is supplementary rules for our Iron Cross wargame, always bringing something new to you. In this "report," we bring rules for the British Army in WW2. This report brings you:
- Rules
- Exclusive Miniatures for British infantry in 6mm
- Exclusive Scenery "Sea of Sand"
- 1 Crusader Tank Card
Have Fun!
PLEASE SUPPORT OUR WORK!
Take Iron Cross Core Book here!... [click here for more] |
Voxelhouse |
Pay What You Want
|
The set of 12 spaceship miniatures as STL files for 3D printing. The set consists of 4 Battleships, 4 Cruisers and 4 Destroyers. The miniatures are in 1:10000 scale and are designed for Stars and Steel wargame by Assault Publishing Studio (Nanofleet standard).
Miniatures for personal use only. ... [click here for more] |
Assault Publishing Studio |
Pay What You Want
|
There's always research that needs doing and it's best to have a dedicated facility to do it in. From secret experiments to alien artifact digs, this research facility provides dedicated space for all your scientific needs! And, of course, Research Facilities make excellent targets for raids, corporate espionage, and unearthed alien domination! This set of STL files provides everything you need... [click here for more] |
Tilting At Windmills |
Pay What You Want
|
The set of 12 spaceship miniatures as STL files for 3D printing. The set consists of 4 Battleships, 4 Cruisers and 4 Destroyers. The miniatures are in 1:10000 scale and are designed for Stars and Steel wargame by Assault Publishing Studio (Nanofleet standard).
Miniatures for personal use only. ... [click here for more] |
Assault Publishing Studio |
Pay What You Want
|
Recon Corner is supplementary rules for our Iron Cross wargame, always bringing something new to you. In this "report," we bring rules for the Polish Army in 1939. This report brings you:
- Rules
- Exclusive Polish Army Miniatures (Infantry, HMG, AT-rifle, and Mortar) for print in your 3D Printer
- Exclusive Scenery "Borders are Burning"
Have Fun!
PLEASE SUPPORT OUR WORK!
Take... [click here for more] |
Voxelhouse |
Pay What You Want
|
For your wargame table! Exclusive 6mm infantry for 1/285 or 1/300 battles. This set includes
USA
- 2 infantry stands
- Machine Gun Stand
- Mortar Stand
Germany
- 2 infantry stands
- Machine Gun Stand
- Mortar Stand
- Pak 37, 75 and 88
Soviet Union
- 2 infantry stands
- Machine Gun Stand
- Mortar Stand
- Political Commissaire with Flag Pole stand
- At rifle stand... [click here for more] |
Voxelhouse |
Pay What You Want
|
Recon Corner is supplementary rules for our Iron Cross wargame, always bringing something new to you. In this "report," we bring the German and Russian Rocket Launchers used in many battles in World War II. This report brings you:
- Rules
- Exclusive Nebelwerfer Miniature for print in your 3D Printer
- Reference Cards
- Scenery
Have Fun!
PLEASE SUPPORT OUR WORK!
Take... [click here for more] |
Voxelhouse |
Pay What You Want
|
Recon Corner is supplementary rules for our Iron Cross wargame, always bringing something new to you. In this "report," we bring the Pantherturm;OstwallTurm, the Panther Bunker, used infinal days of World War II. This report brings you:
- Rules
- Exclusive Miniature for print in your 3D Printer
- Ostwallturm reference Card, King Tiger and T34/85 Cards
- Scenary
Have Fun!
Take... [click here for more] |
Voxelhouse |
Pay What You Want
|
Recon Corner is supplementary rules for our Iron Cross wargame, always bringing something new to you. In this first "report," we bring the Tachanka, the machine-gun cart, used initially in the Russian Revolution and later in World War II. This report brings you:
- An exclusive Tachanka miniature for 3D printing in the 6mm scale
- A scenario
- Rules
- Tachanka reference card!
Have Fun!... [click here for more] |
Voxelhouse |
Pay What You Want
|
This STL files for 3D Printers creates a hex pattern for XPS foam. Each hex should be about 31/32 of an inch wide. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
This STL files for 3D Printers creates a rolling pin with a Versailles Tile Pattern. Each Versailles Tile Pattern should be about 3 inches square. The original pattern was created for the French court to not look like a repeating set of tiles. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
This STL files for 3D Printers creates a rolling pin with a windmill pattern for XPS foam. Each windmill should fill about an inch of area. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
This is a collection of three different assault scout models
AssaultScoutMini-fn30.stl - This is a recreation of the the original UPF Assault Scout miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 20mm (0.8") tall when printed. It was originally designed for FDM printing and so has a low poly... [click here for more] |
New Frontier Games |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. On the old Federation Ships box that included the mini, this model was labeled as a Destroyer but, based on it's size and armament, makes more sense as the Light Cruiser and so has been labeled as such.
It was produced at the same scale as the original minature and stands 94mm (3.7") tall when... [click here for more] |
New Frontier Games |
Pay What You Want
|
This STL files for 3D Printers will create a hex pattern for XPS foam. Each hex should be about 1/3 of an inch wide. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
This is a small wagon, great as scatter terrain in a village, town or Sir Cireneg's Castle.
It only comes with the wagon, axle and wheel (print twice). The other pieces can be purchased from my store. The barrels come in the Kitchen set and the bottle are part of the Wizard's Tower Accessories. ... [click here for more] |
Devious Games |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 25mm (1) tall when printed. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. It still has its printing supports attached. The download file has a smoother surface than the model... [click here for more] |
New Frontier Games |
Pay What You Want
|
Here is a free sample of our upcoming 3D printable scenery range for Wargames and RPG.
You'll find enclosed stl files to print the model on any 3D printer.
This is a multi part model in 28mm scale that needs assembly as follow :
The recommended settings are for PLA printing on any entry level 3D printer, adapt as needed to your printer .
100 or 150 microns layer height
5% to 15% percent... [click here for more] |
Via Ludibunda |
Pay What You Want
|
This is a small Guard House or a Toll Booth. Made in two pieces, the building and the roof.
This goes great with The Wizard's Tower as a minions small hut or with the Bridge or Walls sets as a Toll Booth or Guard House.
This also includes some altered files to use it as the entrance to your Wizard's Tower.
If you like this check out more things for sale.
... [click here for more] |
Devious Games |
Pay What You Want
|
This STL files for 3D Printers creates a hex pattern for XPS foam. Each hex should be about 13/16 of an inch wide. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
This STL files for 3D Printers creates a rolling pin with a running bond pattern of brick work. Each brick should be about an inch long and half an inch wide. ... [click here for more] |
Impossible Emporium |
Pay What You Want
|
This is a well that will be great in the centre of a town or castle (especially Sir Cireneg's Castle, you should get that too!)
It also comes with a tentacle because we all want tentacles coming out of the well don't we? ... [click here for more] |
Devious Games |
Pay What You Want
|
3D printable dug-in markers that you can print out at home and use them as a cheaper, but still visually pleasing, alternative on your tabletop.
These models were designed and tested by the two artists of Black Scrolls Games. You can print out these models on your own 3D printer or you can take them to a local library or a shop that offer this kind of service. They are ideal for... [click here for more] |
Black Scrolls Games |
Pay What You Want
|
Voxel House is launching its line of buildings and ruins from the Medieval/fantasy times for any wargame system. Our buildings are made for 1/64 (28mm) scale and can also be used on the 15mm or 10mm scale. All of our buildings come in parts, enabling assembly as a one-piece 3D kit or print. Outhouse kit is a made for your hero when nature calls!!! You can build a lot of different outhouses!
Ideal... [click here for more] |
Voxelhouse |
Pay What You Want
|
This contains 2 files, a lean to to lean up against a building or wall and logs to go underneath it or elsewhere. ... [click here for more] |
Devious Games |
Pay What You Want
|
4-Rad Sturmwagen Sci-fi Gaming Vehicle 3D Printable .STL files
1/35 scale model of a fictional assault. The files can be resized using a slicer program to any scale that suits you
I recomend 80% size print for 28mm games
This vehicle is good for wargames such as, Warhammer 40,0000, Weird world war II, Conflict 47, Warpath and many others. ... [click here for more] |
Redstarkits |
Pay What You Want
|
Barrel Marker. Forget boring old disk markers, get an objective marker that looks good and makes sense. This console has been designed to be easily printed and to have lots of details for the painters out there. It wouldn't look out of place in any bunker or building and makes a great objective.
This set includes:
• Barrel Objective Marker
Print Settings:
Layer Size:... [click here for more] |
SPQRWargames |
Pay What You Want
|
.STL for Small and large German objective markers for your wargaming pleasure.
Print in 0.2mm layer heights with 3 top layers in PLA.
Paint to suit taste. ... [click here for more] |
Sammy Scenics |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 53mm (2.1") tall when printed. Tested on an SLA printer.
Here's an image of the model printed next to the original metal miniature.
All of my re-creation miniatures are pay-what-you-want products. Feel free to grab... [click here for more] |
New Frontier Games |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 40mm (1.56") tall when printed and is 48mm (1.9") wide. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. The stand base is 1" in diameter. The download file has a smoother surface... [click here for more] |
New Frontier Games |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 50mm (2") tall when printed. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. The stand base is 1" in diameter. The download file has a smoother surface than the model usefor... [click here for more] |
New Frontier Games |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 135mm (5.3") tall when printed. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. The stand base is 1" in diameter. The download file has a smoother surface than the model used... [click here for more] |
New Frontier Games |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 85mm (3.35") tallwhen printed. Tested on both FDM and SLA printers.
Here's a picture of the model printed with my SLA printer (the body was printed hollow as a test which is why it's not as dark as the bow of the ship). This... [click here for more] |
New Frontier Games |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. On the old Federation Ships box that included the mini, this model was labeled "some assembly required" and it came in 10 different pieces (2 for the fuselage and 8 engines). The model provided has them all combined into a single piece.
It was produced at the same scale as the original minature... [click here for more] |
New Frontier Games |
Pay What You Want
|
This is a recreation of the the original miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 52.5mm (2.1") tall when printed. Tested on both FDM and SLA printers.
Here's an image of the model printed with an SLA printer. The stand base is 1" in diameter.
All of my re-creation miniatures are pay-what-you-want... [click here for more] |
New Frontier Games |
Pay What You Want
|
Take your games of Urban Manhunt to the next level by printing out these 3D tokens! Here’s what you get:
First Player token
Wound tokens (marked “1” and “3” for in-game convenience)
Momentum tokens (marked “1” and “3” for in-game convenience)
Item markers
Hidden markers
Empty markers
Reload markers... [click here for more] |
Spectrum Games |
Pay What You Want
|
Log In 
