| Title |
Publisher |
Price |
Includes 8 different variations of 1-4 Fir Trees
Easily printed on an FDM printer with no supports and 10% infill.
I usually print at 0.24 layer height and 1-2 line width for walls.
The scale is suitable for 6mm and 12mm as is, could be scaled to 2mm and 15mm.
Painted trees with 12mm M4 Sherman for scale:
All 8 unique sculpts unpainted:
How looks from above:
... [click here for more] |
Two Inches of Felt |
$5.00
|
Includes 10 different lengths of hedgerow to create a modular bocage battlefield. These are best suited for 6mm but can be used as bushes for 10mm, pictures of both included.
Easily printed on an FDM printer with no supports. I recommend only 2 walls and 15 % infill to print. Use your fastest speed settings as you will not be able to notice imperfections in the leaves.
6mm:
... [click here for more] |
Two Inches of Felt |
$5.00
|
Includes 8 different variations of a deciduous woodlands.
Easily printed on an FDM printer with no supports and 10% infill.
I usually print at 0.24 layer height and 1-2 line width for walls. Takes <1 hr per piece on my neptune 4.
The scale is suitable for 6mm and 12mm as is, could be scaled to 2mm and 15mm.
Painted woods with 6mm panzer IV for reference:
All 8 unique sculpts unpainted:
Closeup... [click here for more] |
Two Inches of Felt |
$5.00
|
Includes 9 different variations of a spreading spruce tree.
Easily printed on an FDM printer with no supports and 10% infill.
I usually print at 0.2 layer height and 2 line width for walls. Takes 4-6 hours each.
1/100 scale sherman for scale.
Copy URL ... [click here for more] |
Two Inches of Felt |
$5.00
|
Includes two rectangle orchards and 2 square orchards for both 6mm and 10mm/12mm. Also includes five 2 inch hexagon orchards for 6mm.
6mm square/rectangle:
6mm hexagon orchards:
Model Renders:
... [click here for more] |
Two Inches of Felt |
$2.50
|
Includes 12 different river sections to create any river system:
Trees and roads NOT INCLUDED, for display only.
Included pieces:
1 River Split
3 Straights
1 30 degree bend
1 60 degree bend
1 120 degree bend
2 straight with bridge (2 inch and 1 inch wide bridges)
1 straight with ford
1 jog
1 twist
Standalone bridges also available
A straight is 6 inches long and ~2 inches wide. They are... [click here for more] |
Two Inches of Felt |
$5.00
|
Includes 10 different variations of 3-5 pine trees on 30mm wide bases for 6mm or 10mm wargaming.
Easily printed on an FDM printer with no supports and 5% infill.
About 10 can be printed in 8 hours overnight.
... [click here for more] |
Two Inches of Felt |
$2.00
|
Includes 8 different river sections to create any river system:
1 River Split
2 Straights
2 60 degree bend
1 120 degree bend
1 straight with bridge
1 straight with ford
A straight is 6 inches long and ~2 inches wide. They are compatible with a 2" hexmap. Easily printed in FDM with no supports.
The last picture shows a 6mm tiger tank for scale.
Copy URL
Copy URL
... [click here for more] |
Two Inches of Felt |
$3.00
|
This is an STL for a stencil to make a 2" Hex grid. It is physically 200 mm x 200 mm and will print fine flat on an Ender3 printer.
I used it to make a 6x8 foot hex map on green felt.
There are two versions, one with wide openings for thick markers and one with narrower openings. ... [click here for more] |
Two Inches of Felt |
Pay What You Want
|
Includes 10 different individual traps in 15mm (but can be scaled), and 2 different strips of five traps for each of 6mm, 10mm, and 15mm. Can be printed in FDM or resin.
... [click here for more] |
Two Inches of Felt |
$2.00
|
5 different crater variations. They work well in the following scales:
6mm: Good for heavy artillery
10mm: Medium artillery or mortar
15mm: Scale up to 150% for medium artillery
Prints easily in FDM with no support. If you want them deeper, just scale in z before slicing.
... [click here for more] |
Two Inches of Felt |
$0.60
|
Includes individual oil barrel and stack of oil barrels.
They are designed in 1/56th scale.
Both will print fine on an FDM printer without support and 10% infill.
... [click here for more] |
Two Inches of Felt |
$2.00
|
This is a nodding donkey oil well in 1/56 scale for 28mm Modern or Sci-Fi wargames.
If printing in FDM, use the separated parts and glue together.
If printing in SLA, you might get away with using the single part model.
... [click here for more] |
Two Inches of Felt |
$1.00
|
These are STLs for Stratego-esque stands that can be loaded with a 1" x 1" piece of paper or cardstock to represent a unit obscured by fog of war. If you use a mix of stands with actual units and "dummy" stands, you can conceal not only the types of units in an army but where the army actually is. The two expanded stands can be used for 6mm wargames as they can also completely obscure a unit so you... [click here for more] |
Two Inches of Felt |
Pay What You Want
|
This is STL files for two support structures and an end cap. When printed, they can be used with a normal 16 oz soup can to create a Sci-Fi fiel storage tank for 28mm wargaming.
Easily printed on FDM.
... [click here for more] |
Two Inches of Felt |
Pay What You Want
|
Includes 5 different textured haystack variations.
For 15mm, scale to 150%
... [click here for more] |
Two Inches of Felt |
FREE
|
This is an STL for a scifi crate with a generic space company logo on it.
It is designed to go with 28mm figures.
Will print fine on an FDM printer without support and 10% infill.
... [click here for more] |
Two Inches of Felt |
Pay What You Want
|
Log In 
